Calculation of Structural Response and Response Sensitivity with Improved Substructuring Method
Publication: Journal of Aerospace Engineering
Volume 32, Issue 3
Abstract
Structural responses and response sensitivities are frequently required in structural health monitoring, whereas the computation of structural responses and response sensitivities of a large-size model is time consuming. This paper proposes a substructuring method for the fast computation of structural responses and response sensitivities. Structural responses are projected onto the range space of a few master substructural eigenvectors to construct a simplified vibration equation. The contribution of slave eigenvectors is compensated by a residue space to achieve high accuracy. Due to this compensation of the residue, a few master eigenvectors are needed to ensure the fast computation of structural responses and response sensitivities with high accuracy, avoiding the inclusion of numerous substructural eigenvectors. In addition, response sensitivities with respect to a parameter are calculated from master eigenvector derivatives of one substructure only, whereas derivatives of other substructures are zeroes. As simplified vibration equations are quite small, the proposed substructuring method can very quickly calculate structural responses and response sensitivities. The proposed method is verified by a frame structure and a bridge structure.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research presented here was supported by the National Natural Science Foundation of China (Projects 51778258, 51629801, and 51838006), Basic Research Program of China (Project 2016YFC0802002), Science Foundation for Distinguished Young Scholars of Hubei Province (Project 2018CFA088), and Fundamental Research Funds of HUST (Projects 2016JCTD113, 2014TS130, and 2015MS064).
References
Choi, D., H. Kim, and M. Cho. 2008. “Improvement of substructuring reduction technique for large eigenproblems using an efficient dynamic condensation method.” J. Mech. Sci. Technol. 22 (2): 255–268. https://doi.org/10.1007/s12206-007-1040-7.
Craig, R., and M. C. C. Bampton. 1968. “Coupling of substructures for dynamic analysis.” AIAA J. 6 (7): 1313–1319. https://doi.org/10.2514/3.4741.
Drozg, A., and G. Cepon. 2018. “Full-degrees of freedom frequency based substructuring.” Mech. Syst. Signal Process. 98: 570–579. https://doi.org/10.1016/j.ymssp.2017.04.051.
Garza, J., and H. Millwater. 2015. “Multicomplex Newmark-beta time integration method for sensitivity analysis in structural dynamics.” AIAA J. 53 (5): 1188–1198. https://doi.org/10.2514/1.J053282.
Gladwell, G. M. L. 1964. “Branch mode analysis of vibrating systems.” AIAA J. 1 (1): 41–59. https://doi.org/10.1016/0022-460X(64)90006-9.
Hou, J. L., L. Jankowski, and J. P. Ou. 2013. “An online substructure identification method for local structural health monitoring.” Smart Mater. Struct. 22 (9): 095017. https://doi.org/10.1088/0964-1726/22/9/095017.
Hou, J. L., L. Jankowski, and J. P. Ou. 2015. “Frequency-domain substructure isolation for local damage identification.” Adv. Struct. Eng. 18 (1): 137–153. https://doi.org/10.1260/1369-4332.18.1.137.
Huang, J. Z., D. S. Li, H. N. Li, G. B. Song, and Y. B. Liang. 2018. “Damage identification of a large cable-stayed bridge with novel cointegrated Kalman filter method under changing environments.” Struct. Control Health Monit. 25 (5): e2152. https://doi.org/10.1002/stc.2152.
Huang, X. C., J. Y. Sun, H. X. Hua, and Z. Y. Zhang. 2015. “Modeling and optimization of octostrut vibration isolation platform by FRF-based substructuring method.” J. Aerosp. Eng. 28 (3): 04014084. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000416.
Hurty, W. C. 1965. “Dynamic analysis of structural systems using component modes.” AIAA J. 3 (4): 678–685. https://doi.org/10.2514/3.2947.
Jetmundsen, B., R. Bielawa, and W. Flannelly. 1988. “Generalized frequency domain substructure synthesis.” J. Am. Helicopter Soc. 33 (1): 55–64. https://doi.org/10.4050/JAHS.33.55.
Klerk, D. D., D. J. Rixen, and S. N. Voormeeren. 2008. “General framework for dynamic substructuring: History, review, and classification of techniques.” AIAA J. 46 (5): 1169–1181. https://doi.org/10.2514/1.33274.
Lei, Y., Y. Wu, and T. Li. 2012. “Identification of non-linear structural parameters under limited input and output measurements.” Int. J. Non-Linear Mech. 47 (10): 1141–1146. https://doi.org/10.1016/j.ijnonlinmec.2011.09.004.
Li, J., H. Hao, and Z. W. Chen. 2017. “Damage identification and optimal sensor placement for structures under unknown traffic-induced vibrations.” J. Aerosp. Eng. 30 (2): B4015001. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000550.
Li, J., and S. S. Law. 2012. “Substructural damage detection with incomplete information of the structure.” J. Appl. Mech. 79 (4): 041003. https://doi.org/10.1115/1.4005552.
Liew, K. M., S. E. Leek, and A. Q. Liu. 1996. “Mixed-interface substructures for dynamic analysis of flexible multibody systems.” Eng. Struct. 18 (7): 495–503. https://doi.org/10.1016/0141-0296(96)00119-8.
Liu, Q. M., J. Zhang, and L. B. Yan. 2010. “A numerical method of calculating first and second derivatives of dynamic response based on Gauss precise time step integration method.” Eur. J. Mech. A-Solids 29 (3): 370–377. https://doi.org/10.1016/j.euromechsol.2009.11.006.
Lu, Z. R., and S. S. Law. 2004. “State-space approach to calculate sensitivity of dynamic response.” In Proc., ASME Int. Mechanical Engineering Congress and Exposition (IMECE’04), 109–112. New York: ASME.
Lu, Z. R., and S. S. Law. 2007. “Features of dynamic response sensitivity and its application in damage detection.” J. Sound Vib. 303 (1–2): 305–329. https://doi.org/10.1016/j.jsv.2007.01.021.
MacNeal, R. H. 1971. “A hybrid method of component mode synthesis.” Comput. Struct. 1 (4): 581–601. https://doi.org/10.1016/0045-7949(71)90031-9.
Nelson, R. B. 1976. “Simplified calculation of eigenvector derivatives.” AIAA J. 24 (14): 1201–1205.
Newmark, N. M. 1959. “A method of computation for structural dynamics.” J. Eng. Mech. Div. 85 (1): 67–94.
Rubin, S. 1975. “Improved component mode representation for structural dynamic analysis.” AIAA J. 13 (8): 995–1006. https://doi.org/10.2514/3.60497.
Weng, S., W. Tian, H. P. Zhu, Y. Xia, F. Gao, Y. T. Zhang, and J. J. Li. 2017. “Dynamic condensation approach to calculation of structural responses and response sensitivities.” Mech. Syst. Signal Process. 88: 302–317. https://doi.org/10.1016/j.ymssp.2016.11.025.
Weng, S., Y. Xia, Y. L. Xu, X. Q. Zhou, and H. P. Zhu. 2009. “Improved substructuring method for eigensolutions of large-scale structures.” J. Sound Vib. 323 (3–5): 718–736. https://doi.org/10.1016/j.jsv.2009.01.015.
Weng, S., Y. Xia, Y. L. Xu, and H. P. Zhu. 2011. “An iterative substructuring approach to the calculation of eigensolution and eigensensitivity.” J. Sound Vib. 330 (14): 3368–3380. https://doi.org/10.1016/j.jsv.2011.02.001.
Weng, S., Y. Xia, X. Q. Zhou, Y. L. Xu, and H. P. Zhu. 2012. “Inverse substructure method for model updating of structures.” J. Sound Vib. 331 (25): 5449–5468. https://doi.org/10.1016/j.jsv.2012.07.011.
Weng, S., H. P. Zhu, R. X. Gao, J. J. Li, and Z. D. Chen. 2018. “Identification of free-free flexibility for model updating and damage detection of structures.” J. Aerosp. Eng. 31 (3): 04018017. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000837.
Yu, S., and J. P. Ou. 2017. “Structural health monitoring and model updating of Aizhai suspension bridge.” J. Aerosp. Eng. 30 (2): B4016009. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000653.
Yuen, K. V., and K. Huang. 2018. “Real-time substructural identification by boundary force modeling.” Struct. Control Health Monit. 25 (5): e2151. https://doi.org/10.1002/stc.2151.
Zhang, D. Y., Y. Yang, T. Q. Wang, and H. Li. 2018. “Improved substructure identification accuracy of shear structures using virtual control system.” Smart Mater. Struct. 27 (2): 025013. https://doi.org/10.1088/1361-665X/aaa46f.
Zhang, W., J. Li, H. Hao, and H. W. Ma. 2017. “Damage detection in bridge structures under moving loads with phase trajectory change of multi-type vibration measurements.” Mech. Syst. Signal Process. 87: 410–425. https://doi.org/10.1016/j.ymssp.2016.10.035.
Zhu, H. P., L. Mao, and S. Weng. 2013. “Calculation of dynamic response sensitivity to substructural damage identification under moving load.” Adv. Struct. Eng. 16 (9): 1621–1631. https://doi.org/10.1260/1369-4332.16.9.1621.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Jul 11, 2018
Accepted: Oct 5, 2018
Published online: Feb 21, 2019
Published in print: May 1, 2019
Discussion open until: Jul 21, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.