Interfacial Adhesion–Strength Detection of Structural Silicone Sealant for Hidden Frame–Supported Glass Curtain Wall Based on Nonlinear Ultrasonic Lamb Wave
Publication: Journal of Aerospace Engineering
Volume 31, Issue 5
Abstract
Degradation of interfacial adhesive strength is the main reason for failure of the hidden frame–supported glass curtain wall that is now widely used in the construction field. In this paper, a nonlinear ultrasonic Lamb wave detection method was developed for hidden frame–supported glass curtain walls. Both theoretical and experimental studies were carried out to verify the feasibility of the method. First, an excitation signal modulated by the Hanning window was generated through piezoceramic transducers. The artificial intervention of thermal aging was applied to accelerate the degradation of the interfacial adhesion strength, and the reflection signal of different aging periods was obtained. Then, two methods of discrete Fourier transform (DFT) and wavelet packet decomposition were used to feature extraction, and normalization and regression analysis were adopted to compare two methods more reasonably. The experiment results show that the amplitude integral method using the second-order relative nonlinear coefficient can reflect the interfacial adhesion strength sensitively, whereas the variation curve of the third-order relative nonlinear coefficient was not obvious. The result of the wavelet packet energy method was close to the amplitude integral method and consistent with reality. The second-order relative nonlinear coefficient fluctuated over a small range at first; then there was a decline, and it finally increased with the thermal aging time. However, the mean squared error (MSE) of the wavelet energy method was smaller. The wavelet packet energy method is more accurate and has a higher allowable error ability in characterizing the trends.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by the Guangdong Province Science and Technology project under Grant Nos. 2016A040403013 and 2016B010108001, Guangzhou Science and Technology project under Grant No. 201607010171, Fundamental Research Funds for the Central Universities under Grant No. 2017ZD035, and Foshan Science and Technology project under Grant No. 2016AG100255.
References
Alem, B., A. Abedian, and K. Nasrollahi-Nasab. 2016. “Reference-free damage identification in plate-like structures using Lamb-wave propagation with embedded piezoelectric sensors.” J. Aerosp. Eng. 29 (6): 04016062. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000646.
An, Z., X. Wang, J. Mao, M. Li, and M. Deng. 2010. “Theoretical and experimental research on nonlinear spring models of bonding interface.” Acta Acustica 35 (5): 481–487.
Annamdas, V. G. M., and C. K. Soh. 2008. “Three-dimensional electromechanical impedance model for multiple piezoceramic transducers–structure interaction.” J. Aerosp. Eng. 21 (1): 35–44. https://doi.org/10.1061/(ASCE)0893-1321(2008)21:1(35).
Barnard, D. J., G. E. Dace, D. K. Rehbein, and O. Buck. 1997. “Acoustic harmonic generation at diffusion bonds.” J. Nondestr. Eval. 16 (2): 77–89. https://doi.org/10.1007/BF02683880.
Bhalla, S., P. Kumar, A. Gupta, and T. K. Datta. 2009. “Simplified impedance model for adhesively bonded piezo-impedance transducers.” J. Aerosp. Eng. 22 (4): 373–382. https://doi.org/10.1061/(ASCE)0893-1321(2009)22:4(373).
Bhalla, S., and C. K. Soh. 2004a. “Structural health monitoring by piezo-impedance transducers. I: Modeling.” J. Aerosp. Eng. 17 (4): 154–165. https://doi.org/10.1061/(ASCE)0893-1321(2004)17:4(154).
Bhalla, S., and C. K. Soh. 2004b. “Structural health monitoring by piezo-impedance transducers. II: Applications.” J. Aerosp. Eng. 17 (4): 166–175. https://doi.org/10.1061/(ASCE)0893-1321(2004)17:4(166).
Chan, E. 2014. “Building maintenance strategy: A sustainable refurbishment perspective.” Univ. J. Manage. 2 (1): 19–25.
Deng, M. 1999. “Cumulative second-harmonic generation of Lamb-mode propagation in a solid plate.” J. Appl. Phys. 85 (6): 3051–3058. https://doi.org/10.1063/1.369642.
Deng, M. 2005. “Nondestructive evaluation of adhesive strength of composite structures using an acousto- ultrasonic approach.” Appl. Acoust. 24 (5): 292–299.
Deng, M. 2013. “A nonlinear ultrasonic Lamb wave approach for evaluating surface properties of solid plates.” Appl. Acoust. 32 (4): 263–270.
Deng, M., Y. Xiang, and L. Liu. 2011. “Time-domain analysis and experimental examination of cumulative second-harmonic generation by primary Lamb wave propagation.” J. Appl. Phys. 109 (11): 113525. https://doi.org/10.1063/1.3592672.
Deng, M., Y. Xiang, J. Pei, and L. Liu. 2012. “Time-domain measurement technique of second harmonic of ultrasonic Lamb waves using mismatch of group velocities.” Acta Acustica 37 (6): 621–628.
Du, G., L. Huo, Q. Kong, and G. Song. 2016. “Damage detection of pipeline multiple cracks using piezoceramic transducers.” J. Vibroeng. 18 (5): 2828–2838. https://doi.org/10.21595/jve.2016.17040.
Dun, Y., X. Shi, and Z. Xu. 2008. “Nondestructive evaluation of adhesive interfaces in MMCS using nonlinear ultrasonic method.” China Mech. Eng. 19 (19): 2351–2354.
Fujino, Y., and S. Ritdumrongkul. 2007. “Identification of the location and level of damage in multiple-bolted-joint structures by PZT actuator-sensors.” J. Struct. Eng. 132 (2): 304–311. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:2(304).
GB (National Standard of the People’s Republic of China). 2005. Structural silicon sealants for building. GB 16776. Beijing, China: General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China.
Gu, H., G. Song, H. Dhonde, Y. Mo, and S. Yan. 2006. “Concrete early-age strength monitoring using embedded piezoelectric transducers.” Smart Mater. Struct. 15 (6): 1837–1845. https://doi.org/10.1088/0964-1726/15/6/038.
Guo, H., and F. Cao. 2006. “Ultrasonic testing of the interface bonding quality of solid rocket motor charge.” Aero Weaponry 6: 49–52. https://doi.org/10.3969/j.issn.1673-5048.2006.06.014.
Hong, X. B., X. Lin, B. Yang, and M. Li. 2017. “Crack detection in plastic pipe using piezoelectric transducers based on nonlinear ultrasonic modulation.” Smart Mater. Struct. 26 (10): 104012. https://doi.org/10.1088/1361-665X/aa6293.
JGJ (Industry Standard of the People’s Republic of China). 2013. Technical code for glass curtain wall engineering. JGJ 102-2013. Beijing, China: Ministry of Housing and Urban-Rural Development of People’s Republic of China.
Ji, Q., M. Ho, R. Zheng, Z. Ding, and G. Song. 2015. “An exploratory study of stress wave communication in concrete structures.” Smart Mater. Struct. 15 (1): 135–150. https://doi.org/10.12989/sss.2015.15.1.135.
Jiang, N., Z. Wang, Y. Jin, and Y. X. Chen. 2014. “Measurement of interface bond quality of composite structure using nonlinear ultrasound.” Acta Armamentarii 35 (3): 398–402.
Kim, H. S., J. H. Kim, and J. Kim. 2011. “A review of piezoelectric energy harvesting based on vibration.” Int. J. Precis. Eng. Man 12 (6): 1129–1141. https://doi.org/10.1007/s12541-011-0151-3.
Kurdila, A. J., J. Li, T. Strganac, and G. Webb. 2003. “Nonlinear control methodologies for hysteresis in PZT actuated on-blade elevons.” J. Aerosp. Eng. 16 (4): 167–176. https://doi.org/10.1061/(ASCE)0893-1321(2003)16:4(167).
Lee, T. H., I. H. Choi, and K. Y. Hang. 2008. “The nonlinearity of guided wave in an elastic plate.” Mod. Phys. Lett. B 22 (11): 1135–1140. https://doi.org/10.1142/S0217984908015966.
Lind, H., and H. Muyingo. 2012. “Building maintenance strategies: Planning under uncertainty.” Property Manage. 30 (1): 14–28. https://doi.org/10.1108/02637471211198152.
Liu, X., Y. Bao, Y. Qiu, and X. Wang. 2011. “Destructive testing of structural silicone sealant applied on concealed frame curtain walls.” China Build. Waterproofing 17: 26–30.
Liu, Y., V. K. Chillara, C. J. Lissenden, and J. L. Rose. 2013. “Third harmonic shear horizontal and Rayleigh Lamb waves in weakly nonlinear plates.” J. Appl. Phys. 114 (11): 195 https://doi.org/10.1063/1.4821252.
Luo, M., W. Li, C. Hei, and G. Song. 2016. “Concrete infill monitoring in concrete-filled FRP tubes using a PZT-based ultrasonic time-of-flight method.” Sensors 16 (12): 2083 https://doi.org/10.3390/s16122083.
Meng, Y., X. Di, and B. Zeng. 2012. “Adhesive properts study on artificial aged structural silicone sealan.” Constr. Qual. 30 (11): 13–16.
Mojškerc, B., T. Kek, and J. Grum. 2015. “Pulse-echo ultrasonic testing of adhesively bonded joints in glass façades.” In Proc., 6th Technical Conf. Emerging Technologies in Non-Destructive Testing VI, 27–29. Brussels, Belgium.
Parvasi, S. M., C. Xu, Q. Kong, and G. Song. 2016. “Detection of multiple thin surface cracks using vibrothermography with low-power piezoceramic-based ultrasonic actuator—A numerical study with experimental verification.” Smart Mater. Struct. 25 (5): 055042. https://doi.org/10.1088/0964-1726/25/5/055042.
Rothenfusser, M., M. Mayr, and J. Baumann. 2000. “Acoustic nonlinearities in adhesive joints.” Ultrasonics 38 (1–8): 322–326. https://doi.org/10.1016/S0041-624X(99)00083-9.
Ruan, J., S. C. M. Ho, D. Patil, M. Li, and G. Song. 2014. “Wind turbine blade damage detection using an active sensing approach.” Smart Mater. Struct. 23 (10): 105005. https://doi.org/10.1088/0964-1726/23/10/105005.
Sethi, V., and G. Song. 2007. “Multimodal vibration control of a flexible structure using piezoceramic sensor and actuator.” J. Intel. Mater. Syst. Struct. 19 (5): 573–582. https://doi.org/10.1177/1045389X07077853.
Shui, G., Y. S. Wang, P. Huang, and J. Qu. 2015. “Nonlinear ultrasonic evaluation of the fatigue damage of adhesive joints.” NDT E Int. 70: 9–15. https://doi.org/10.1016/j.ndteint.2014.11.002.
Siu, S., Q. Ji, W. Wu, G. Song, and Z. Ding. 2014. “Stress wave communication in concrete. I: Characterization of a smart aggregate based concrete channel.” Biocontrol Sci. Technol. 23 (12): 125030. https://doi.org/10.1088/0964-1726/23/12/125030.
Sohn, H., H. W. Park, K. H. Law, and C. R. Farrar. 2008. “Damage detection in composite plates by using an enhanced time reversal method.” J. Aerosp. Eng. 20 (3): 141–151. https://doi.org/10.1061/(ASCE)0893-1321(2007)20:3(141).
Song, G., C. Olmi, and H. Gu. 2007. “An overheight vehicle bridge collision monitoring system using piezoelectric transducers.” Smart Mater. Struct. 16 (2): 462–468. https://doi.org/10.1088/0964-1726/16/2/026.
Stasyunas, A. P., and A. N. Machyulis. 1968. “Structural changes and defect development in epoxy adhesive compounds during thermal aging.” Polym. Mech. 4 (2): 229–232. https://doi.org/10.1007/BF00855624.
Tan, Z., Y. Wang, H. Zhang, and F. Zhao. 2013. “Methods of glues inspection for existing building curtain wall.” Ind. Constr. s1: 655–657.
Wang, Z., T. Li, and H. Deng. 2012. “Form-finding analysis and active shape adjustment of cable net reflectors with PZT actuators.” J. Aerosp. Eng. 27 (3): 575–586. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000273.
Xu, Q., Y. Tang, M. Wang, and C. Tang. 2011. “Comparative study about on-site testing methods for silicone structural sealant.” China Build. Waterproofing 16: 38–41.
Yan, D., B. W. Drinkwater, and S. A. Neild. 2009. “Measurement of the ultrasonic nonlinearity of kissing bonds in adhesive joints.” NDT E Int. 42 (5): 459–466. https://doi.org/10.1016/j.ndteint.2009.02.002.
Yang, S., L. Gu, and R. F. Gibson. 2001. “Nondestructive detection of weak joints in adhesively bonded composite structures.” Compos. Struct. 51 (1): 63–71. https://doi.org/10.1016/S0263-8223(00)00125-2.
Yang, Y., J. Xu, and C. K. Soh. 2005. “Generic impedance-based model for structure-piezoceramic interacting system.” J. Aerosp. Eng. 18 (2): 93–101. https://doi.org/10.1061/(ASCE)0893-1321(2005)18:2(93).
Yelve, N. P., M. Mitra, and P. M. Mujumdar. 2015. “Detection of stiffener disbonding in a stiffened aluminium panel using nonlinear Lamb wave.” Appl. Acoust. 89: 267–272. https://doi.org/10.1016/j.apacoust.2014.10.010.
Zhu, J., L. Ren, S. C. Ho, Z. Jia, and G. Song. 2017. “Gas pipeline leakage detection based on PZT sensors.” Smart Mater. Struct. 26 (2): 025022. https://doi.org/10.1088/1361-665X/26/2/025022.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Nov 1, 2017
Accepted: Jan 25, 2018
Published online: May 19, 2018
Published in print: Sep 1, 2018
Discussion open until: Oct 19, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.