Abstract
An experimental and numerical investigation was conducted to study the skin–stiffener separation of single T-shape stiffener specimens in postbuckling condition. Three specimens were manufactured with a centrally located Teflon insert, and were loaded in compression until collapse. Deformation patterns and separation evolution were monitored during the tests. To measure the full-field displacements and the strain distributions of the specimens, a digital image correlation (DIC) system was used. Skin–stiffener separation was observed and measured with an ultrasound system. Finite-element (FE) analyses were conducted to capture interlaminar damage mechanism based on the virtual crack closure technique. The numerical analysis accurately predicted the postbuckling deformation and the skin–stiffener separation behavior. The close correlation between the experimental and numerical results allows for further exploitation of the strength reserve in the postbuckling region and wider design options for the next generation of composite aircraft designs.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abramovich, H., Weller, T., and Bisagni, C. (2008). “Buckling behavior of composite laminated stiffened panels under combined shear-axial compression.” J. Aircraft., 45(2), 402–413.
Ambur, D. R., Jaunky, N., and Hilburger, M. W. (2004). “Progressive failure analyses of compression-loaded composite curved panels with and without cutouts.” Compos. Struct., 65(2), 143–155.
Armanios, E. A. (1991). “Delamination analysis for laminated composites. I: Fundamentals.” J. Aerosp. Eng., 194–215.
Benzeggagh, M. L., and Kenane, M. (1996). “Measurements of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus.” Compos. Sci. Technol., 56(4), 439–449.
Bisagni, C. (2006). “Progressive delamination analysis of stiffened composite panels in post-buckling.” Proc., 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conf., American Institute of Aeronautics and Astronautics, Reston, VA, 1–12.
Bisagni, C., and Cordisco, P. (2003). “An experimental investigation into the buckling and post-buckling of CFRP shells under combined axial and torsion loading.” Compos. Struct., 60(4), 391–402.
Bisagni, C., and Cordisco, P. (2006). “Post-buckling and collapse experiments of stiffened composite cylinderical shells subjected to axial loading and torque.” Compos. Struct., 73(2), 138–149.
Bisagni, C., and Davila, C. G. (2014). “Experimental investigation of the postbuckling response and collapse of a single-stiffener specimen.” Compos. Struct., 108(1), 493–503.
Bisagni, C., Vescovini, R., and Davila, C. G. (2011). “Single-stiffener compression specimen for the assessment of damage tolerance of post-buckled structures.” J. Aircraft., 48(2), 495–502.
Camanho, P. P., Dávila, C. G., and de Moura, M. F. (2016). “Numerical simulation of mixed-mode progressive delamination in composite materials.” J. Compos. Mater., 37(16), 1415–1424.
Camanho, P. P., Maimí, P., and Dávila, C. G. (2007). “Prediction of size effects in notched laminates using continuum damage mechanics.” Compos. Sci. Technol., 67(13), 2715–2727.
Dassault Systèmes Simulia Corp. (2015). Abaqus analysis user’s manual guide, version 6.16, Providence, RI.
Dávila, C. G., and Bisagni, C. (2017). “Fatigue life and damage tolerance of postbuckled composite stiffened structures with initial delamination.” Compos. Struct., 161, 73–84.
Falzon, B. G., and Aliabadi, M. H. (2008). Buckling and post-buckling structures: Experimental, analytical and numerical studies, Imperial College Press, London.
Featherston, C. A., and Watson, A. (2006). “Buckling of optimised curved composite panels under shear and in-plane bending.” Compos. Sci. Technol., 66(15), 2878–2894.
Krueger, R., and Minguet, P. J. (2005). Skin-stiffener debond prediction based on computational fracture analysis, NASA Langley Research Center, Hampton, VA.
Lauterbach, S., Orifici, A. C., Wagner, W., Balzani, C., Abramovich, H., and Thomson, R. (2010). “Damage sensitivity of axially loaded stiffener-stiffened curved CFRP panels.” Compos. Sci. Technol., 70(2), 240–248.
Li, J. (2002). “Three-dimensional effect in the prediction of flange delamination in composite skin-stringer pull-off specimens.” J. Compos. Tech. Res., 24(3), 180–187.
Orifici, A. C., de Zarate Alberdi, I. O., Thomson, R. S., and Bayandor, J. (2008). “Compression and post-buckling damage growth and collapse analysis of flat composite stiffened panels.” Compos. Sci. Technol., 68(15–16), 3150–3160.
Orifici, A. C., Thomson, R. S., Degenhardt, R., Bisagni, C., and Bayandor, J. (2009). “A finite element methodology for analysing degradation and collapse in postbuckling composite aerospace structures.” J. Compos. Mater., 43(26), 3239–3263.
Vescovini, R., Dávila, C. G., and Bisagni, C. (2013). “Failure analysis of composite multi-stiffener panels using simplified models.” Compos. Part B: Eng., 45(1), 939–951.
VIC-3D version 7 [Computer software]. Correlated Solutions, Inc., Columbia, SC.
Zimmermann, R., Klein, H., and Kling, A. (2006). “Buckling and postbuckling of stiffener stiffened fiber composite curved panels—Tests and computations.” Compos. Struct., 73(2), 150–161.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Mar 24, 2017
Accepted: Nov 17, 2017
Published online: Mar 29, 2018
Published in print: Jul 1, 2018
Discussion open until: Aug 29, 2018
ASCE Technical Topics:
- Analysis (by type)
- Buckling
- Composite materials
- Compression
- Continuum mechanics
- Deformation (mechanics)
- Dynamics (solid mechanics)
- Engineering fundamentals
- Engineering materials (by type)
- Engineering mechanics
- Finite element method
- Materials engineering
- Methodology (by type)
- Numerical analysis
- Numerical methods
- Post buckling
- Solid mechanics
- Stiffening
- Structural behavior
- Structural dynamics
- Structural engineering
- Structural mechanics
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.