Platform for Transport Aircraft Wing–Body Parametric Modeling and High-Lift System Design
Publication: Journal of Aerospace Engineering
Volume 30, Issue 5
Abstract
In this paper, the authors describe a software they have developed for wing–body parametric modeling and high-lift system design. This software has the following features: (1) it generates and modifies geometric as well as aerodynamic analysis in the conceptual and preliminary aircraft design phases; (2) it integrates high-fidelity computer-aided design (CAD) and computational fluid dynamics (CFD) software by a graphical user interface(GUI); and (3) it has an aerodynamic/mechanical integrated design and kinematic simulation for a three-dimensional (3D) high-lift device. Based on the application program interface (API) techniques of specialized third-party software, the software integrates B-spline fitting and modeling of airfoil and complex curves, modeling of the fuselage and wings, a high-lift system design, the automatic generation of a structured grid, and high-fidelity CFD code based on Reynolds-averaged Navier–Stokes (RANS) equations. First, the geometry of the fuselage and wing is parametrically generated by lofting with control curves, and then the initial graphics exchange specification (IGES) format geometry is exported to an automatic grid generation module. Finally, the structured grid file is exported to the CFD solver for aerodynamic analysis. The NACA0012 airfoil and DLR-F6 FX2B wing–body model that was published at a workshop are selected for software validation. The cruise configuration model (with nacelle, wingtip, and empennage designed manually) of a 150 seat airliner designed using this software was subsequently used for a high-lift aerodynamic/mechanical integrated design and kinematic simulation. The results illustrate that the software was able to integrate wing–body modeling and high-lift aerodynamic/mechanism design in the conceptual and preliminary aircraft design phases.
Get full access to this article
View all available purchase options and get full access to this article.
References
Anemaat, W. A., and Schueler, K. L. (1997). “Airplane configuration layout design using object-oriented methods.”, World Aviation Congress, Anaheim, CA.
CADS [Computer software]. Open Mind Technologies AG, Wessling, Germany.
Fidanci, M., Miller, J. R., and Strauss, D. J. (2000). “Integrating automated multi-disciplinary optimization in preliminary design of non-traditional aircraft.”, Air Defense Agency, Wright-Patterson Air Force Base, OH.
Head, H., Carolina, S., and Raymer, D. P. (1992). “RDS: A PC-based aircraft design, sizing, and performance system.”, Guidance, Navigation and Control Conference, Hilton Head Island, SC.
Jayaram, S., Myklebust, A., and Gelhausen, P. (1992). “ACSYNT-A standards-based system for parametric, computer aided conceptual design of aircraft.”, Aerospace Design Conference, Irvine, CA.
Liu, H. M. (2010). Programming of visual basic case tutorial, Posts and Telecom Press, Beijing.
Lu, X. L., and Gong, X. D. (2008). “Development research of aircraft synthetic conceptual design software.” Third Chinese Society of Aeronautics and Astronautics Youth Science and Technology Forum, Chinese Society of Aeronautics and Astronautics, Beijing, 3–14.
Manning, T. A., et al. (2004). “ComGeom2: A geometry tool for multidisciplinary analysis and data sharing.” 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conf., AIAA-2004-4303, American Institute of Aeronautics and Astronautics, Albany, NY.
OpenCADS [Computer software]. Open Mind Technologies AG, Wessling, Germany.
OpenFOAM [Computer software]. OpenFOAM Foundation, London.
Painchaud-Ouellet, S., Tribes, C., Trepanier, J. Y., and Pelletier, D. (2004). “Airfoil shape optimization using NURBS representation under thickness constraint.” 42nd AIAA Aerospace Sciences Meeting and Exhibit, AIAA 2004-1095, American Institute of Aeronautics and Astronautics, Reno, NV.
Sclafani, A. J., Vassberg, J. C., Harrison, N. A., Rumsey, C. L., Rivers, S. M., and Morrison, J. H. (2008). “CFL3D/OVERFLOW results for DLR-F6 wing/body and drag prediction workshop wing.” J. Aircr., 45(3), 762–780.
Shi, F. Z. (2001). Computer-aided geometric design and non-uniform rational B-spline, Higher Education Press, Beijing, 211–245.
Wang, Y. C. (2013). “Research on B-spline parameterization of supercritical wings.” M.Sc. dissertation, Beihang Univ., Beijing.
Xie, X., and Haberland, C. (1999). “A new numerical design tool for concept evaluation of propeller aircraft.” Aircr. Des., 2(3), 147–165.
Xie, Y. F., and Yu, X. Q. (2008). “Parametric design of aircraft configuration using API in CATIA.” Comput. Eng. Des., 29(14), 078.
Zhan, L., Yu, X. Q., and Sheng, Q. (2009). “Parametric CAD model of aircraft configuration for civil jets conceptual design.” Comput. Eng. Des., 30(16), 3887–3890.
Zhang, X. J. (2002). Aircraft design manual VI—Aerodynamic design, Aviation Industry Press, Beijing, 51–52.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Mar 26, 2016
Accepted: Mar 6, 2017
Published online: Jul 14, 2017
Published in print: Sep 1, 2017
Discussion open until: Dec 14, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.