Novel Lightning Strike-Protected Polymeric Composite for Future Generation Aviation
Publication: Journal of Aerospace Engineering
Volume 30, Issue 1
Abstract
This investigation demonstrates the deposition of copper and titanium nitride on a polymeric composite using physical vapor deposition (PVD) to increase the thermoelectrical properties of the composite. The physicothermal characteristics of the polymeric composite and conductive polymeric composite were characterized using field electron scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). Electrical conductivity of the basic and conductive composites was determined using the four-probe method of resistivity measurement. It was observed that thermal properties and electrical conductivity of the composite increased significantly due to the coper and titanium nitride deposition. The basic and conductive polymeric composite were subjected to high current and temperature to simulate the effect of a lightning strike. It was observed that there is a severe damage to the basic polymeric composite compared to the conductive polymeric composite, resulting in significant deterioration of mechanical properties.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the Department of Aerospace Engineering, Department of Chemical Engineering and Department of Sciences, Amrita University, Coimbatore, India, for providing the research facilities. The authors would also like to sincerely thank the Facilitation Centre for Industrial Plasma Technologies (FCIPT), Gandhinagar, India, for permitting us to use their physical vapor deposition equipment.
References
Antoine, L., Philippe, D., Eric, D., and Colette, L. (2012). “Electrical conductivity improvement of aeronautical carbon fiber reinforced polyepoxy composites by insertion of carbon nanotubes.” J. Non-Cryst. Solids, 15(358), 1859–1862.
Chemartin, L., and Lalande, P. (2012). “Direct effects of lightning on aircraft structure: Analysis of the thermal, electrical and mechanical constraints.” Aerosp. Lab. J., 5, 1–15.
Chesmar, E. (2009). “United Airlines perspectives on composite maintenance, challenges and regulatory issues.” 4th FAA/EASA/Boeing/Airbus Joint Workshop on Safety and Certification, Tokyo.
Fisher, F. A., Plumer, J. A., and Perala, R. A. (2012). Lightning protection of aircraft, 2nd Ed., Lightning Technologies Inc., Pittsfield, MA, 1–14.
Gagné, M., and Therriault, D. (2014). “Lightning strike protection of composites.” Progr. Aerosp. Sci., 64, 1–16.
Hansen, G., and Hansen, N. (2009). “New lightning strike materials for simultaneous reductions in weight and damage.” ICOLSE 2009 Conf. Proc., Lightning Technologies, 15–17.
Hirohide, K., and Paolo, F. (2011). “Lightning strike damage resistance and tolerance of scarf-repaired mesh-protected carbon fiber composites.” Compos. Part A, 42(9), 1247–1262.
Larsson, A. (2002). “The interaction between a lightning flash and an aircraft in flight.” C. R. Physique, 3(10), 1423–1444.
Nakayama, N. (2009). “Field experience: Lightning strike damage of ANA B767.” 4th FAA/EASA/Boeing/Airbus Joint Workshop on Safety and Certification, Tokyo.
Peter, L. J. (1999). “Wood to metal: The structural origins of the modern airplane.” J. Aircraft, 36(6), 914–918.
SAE (Society of Automotive Engineers). (1999). “Aerospace recommended practice (ARP5414 standard): Aircraft lightning zoning.” 24–25.
Simon, E., Ivan, R., Matthew, C., and Richard, M. (2014). “Lightning strike protection of aircraft structural joints.” Int. Conf. on Lightning Protection (ICLP), IEEE Xplore, Shanghai, China, 1–675.
Tomblin, J. S., Salah, L., Welch, J. M., Borgman, M. D. (2004). “Bonded repair of aircraft composite sandwich structures.”, National Institute for Aviation Research.
Xiang, M., Scarpa, F., Xin, P. H., Allegri, G., Yuan, J., and Ciobanu, R. (2015). “Design of a hybrid carbon fibre/carbon nanotube composite for enhanced lightning strike resistance.” Aerosp. Sci. Technol., 47, 367–377.
Yoshino, K., et al. (1993). “Preparation and electrical properties of polypyrrole-polyethylene composite.” Jpn. J. Appl. Phys., 32(2), 979–985.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Nov 13, 2015
Accepted: May 2, 2016
Published online: Jul 25, 2016
Discussion open until: Dec 25, 2016
Published in print: Jan 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.