Dynamic Mesh Analyses of Helicopter Rotor–Fuselage Flow Interaction in Forward Flight
Publication: Journal of Aerospace Engineering
Volume 29, Issue 6
Abstract
Unsteady compressible flow analyses of helicopter rotor–fuselage interaction in hover and forward flight conditions are carried out using commercially available computational fluid dynamics (CFD) solver FLUENT. The individual effects of each component on the flow are investigated by simulating the isolated fuselage and the isolated rotor configurations. Then, the rotor-fuselage interaction problem is analyzed. Azimuthal variations of the flap and pitch motions of the blades are prescribed a priori as a first-order Fourier series through a user-defined function feature of the code. The prescribed blade motion may result in meshes with undesirable grid qualities, which may lead to unphysical solutions. A non-overset dynamic mesh motion method that applies volume mesh deformation and cell remeshing within a priori organized block mesh structure is used to accommodate the rigid blade motion. The remeshing is performed when the grid deformation is more than a predefined skewness value of 0.95. The near wall flow region is discretized using triangular base prismatic layers. The remaining part of the computational domain is modeled by tetrahedral volume elements. The results of the present study have been compared with the experiments and other available numerical results found in literature. The present single grid methodology has given similar successful results with much lower number of grid elements, thus resulting in much shorter computing times, using modest computational power.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abras, J. N., and Hariharan, N. (2015). “Comparison of CFD hover predictions on the s-76 rotor.” 53rd AIAA Aerospace Sciences Meeting, AIAA 2015-1711, AIAA SciTech, Reston, VA.
Açıkgöz, M. B., Anbarcı, K., and Aslan, A. R. (2014). “Askı ve İleri Uçuş Şartlarında Helikopter Rotor-Gövde Akış Etkileşimi için HAD Analiz Yöntemi Geliştirilmesi.” 3. Ulusal Havacılıkta İleri Teknolojiler Konferansı (HİTEK), Hava Harp Okulu, İstanbul, Turkey.
Ahmad, J., and Duque, E. P. (1996). “Helicopter rotor blade computation in unsteady flows using moving overset grids.” J. Aircr., 33(1), 54–60.
ANSA 13 [Computer software]. BETA CAE Systems, Epanomi, Greece.
Antoniadis, A. F., et al. (2012). “Assessment of CFD methods against experimental flow measurements for helicopter flows.” Aerosp. Sci. Technol., 19(1), 86–100.
Batina, J. T. (1990). “Unsteady Euler airfoil solutions using unstructured dynamic meshes.” AIAA J., 28(8), 1381–1388.
Bauchau, O. A., and Ahmad, J. U. (1996). “Advanced CFD and CSD methods for multidisciplinary applications in rotorcraft problems.” AIAA/NASA/ISSMO, 6th Symp. on Multidisciplinary Analysis and Optimization, AIAA, Reston, VA, 1441–1451.
Bernardini, G., Serafini, J., Colella, M. M., and Gennaretti, M. (2013). “Analysis of a structural-aerodynamic fully-coupled formulation for aeroelastic response of rotorcraft.” Aerosp. Sci. Technol., 29(1), 175–184.
Bettschart, N. (1999). “Rotor fuselage interaction: Euler and Navier-Stokes computations with an actuator disk.” Proc., 55th Annual Forum of the American Helicopter Society, American Helicopter Society (AHS), Washington, DC, 419–438.
Biava, M., and Vigevano, L. (2012). “Simulation of a complete helicopter: A CFD approach to the study of interference effects.” Aerosp. Sci. Technol., 19(1), 37–49.
Biboulet, N., Gravouil, A., Dureisseix, D., Lubrecht, A. A., and Combescure, A. (2013). “An efficient linear elastic FEM solver using automatic local grid refinement and accuracy control.” Finite Elem. Anal. Des., 68, 28–38.
Biedron, R. T., and Lee-Rausch, E. M. (2008). “Rotor airloads prediction using unstructured meshes and loose CFD/CSD coupling.” 26th AIAA Applied Aerodynamics Conf., AIAA 2008-7341, AIAA, Reston, VA.
Bottasso, C. L., Detomi, D., and Serra, R. (2005). “The ball-vertex method: A new simple spring analogy method for unstructured dynamic meshes.” Comput. Methods Appl. Mech. Eng., 194(39), 4244–4264.
Brocklehurst, A., and Barakos, G. N. (2013). “A review of helicopter rotor blade tip shapes.” Prog. Aerosp. Sci., 56, 35–74.
Castillon, L., Billonnet, G., Riou, J., Péron, S., and Benoit, C. (2014). “A technological effect modeling on complex turbomachinery applications with an overset grid numerical method.” J. Turbomach., 136(10), 101005.
CATIA [Computer software]. Dassault Systèmes, Vélizy-Villacoublay, France.
Chaffin, M. S., and Berry, J. D. (1994). “Navier-Stokes and potential theory solutions for a helicopter fuselage and comparison with experiment.”, National Aeronautics and Space Administration (NASA), Washington, DC.
Chaffin, M. S., and Berry, J. D. (1997). “Helicopter fuselage aerodynamics under a rotor by Navier-Stokes simulation.” J. Am. Helicopter Soc., 42(3), 235–243.
Chakraborty, P., Balachandar, S., and Adrian, R. J. (2005). “On the relationships between local vortex identification schemes.” J. Fluid Mech., 535, 189–214.
Chen, Z., et al. (2008). “Progress in application of CFD techniques.” Sci. China Series E: Technol. Sci., 51(7), 827–841.
Chuiton, F. L. (2004). “Actuator disc modelling for helicopter rotors.” Aerosp. Sci. Technol., 8(4), 285–297.
Cordero-Gracia, M., Gómez, M., Ponsin, J., and Valero, E. (2012). “An interpolation tool for aerodynamic mesh deformation problems based on octree decomposition.” Aerosp. Sci. Technol., 23(1), 93–107.
Dapogny, C., Dobrzynski, C., and Frey, P. (2014). “Three-dimensional adaptive domain remeshing, implicit domain meshing, and applications to free and moving boundary problems.” J. Comput. Phys., 262, 358–378.
De Boer, A., Van der Schoot, M. S., and Bijl, H. (2007). “Mesh deformation based on radial basis function interpolation.” Comput. Struct., 85(11), 784–795.
De Gregorio, F. (2012). “Flow field characterization and interactional aerodynamics analysis of a complete helicopter.” Aerosp. Sci. Technol., 19(1), 19–36.
Deng, X., Mao, M., Tu, G., Zhang, H., and Zhang, Y. (2012). “High-order and high accurate CFD methods and their applications for complex grid problems.” Commun. Comput. Phys., 11(4), 1081–1102.
Djomehri, M. J., and Biswas, R. (2003). “Performance enhancement strategies for multi-block overset grid CFD applications.” Parallel Comput., 29(11), 1791–1810.
Erzincanli, B., and Sahin, M. (2013). “An arbitrary Lagrangian-Eulerian formulation for solving moving boundary problems with large displacements and rotations.” J. Comput. Phys., 255, 660–679.
Fluent 14.5 [Computer software]. ANSYS, Canonsburg, PA.
Freeman, C. E., and Mineck, R. E. (1979). “Fuselage surface pressure measurements of a helicopter wind tunnel model with a 3.15 meter diameter single rotor.”, National Aeronautics and Space Administration (NASA), Washington, DC.
Friedmann, P. P. (2004). “Rotary-wing aeroelasticity: Current status and future trends.” AIAA J., 42(10), 1953–1972.
Gülçat, Ü., Mısırlıoğlu, A., and Aslan, A. R. (2000). “3-D viscous flow solutions over bodies in relative motion.” Int. J. Comput. Fluid Dyn., 14(1), 1–19.
Guruswamy, G. P. (2009). “CFD- and CSD-based aeroelastic computations of helicopter rotor blades using a modular approach.” 39th AIAA Fluid Dynamics Conf., AIAA 2009-4199, AIAA, Reston, VA.
Hariharan, N., and Sankar, L. N. (2000). “A review of computational techniques for rotor wake modeling.” American Institute of Aeronautics and Astronautics (AIAA), Reston, VA.
Heise, R., Meyer, C. J., and Backström, T. W. (2007). “CFD simulation of helicopter flow fields using an actuator disk main rotor model.” South Afr. Inst. Mech. Eng., 23(3), 26–39.
Hirt, C. W., Amsden, A. A., and Cook, J. L. (1974). “An arbitrary Lagrangian-Eulerian computing method for all flow speeds.” J. Comput. Phys., 14(3), 227–253.
Isser, A., and Rosen, A. (1989). “Applying the lifting surface method to the blade tip of a hovering helicopter.” Comput. Math. Appl., 17(11), 1455–1466.
Jeong, J., and Hussain, F. (1995). “On the identification of a vortex.” J. Fluid Mech., 285(2), 69–94.
Johnson, A. A., and Tezduyar, T. E. (1994). “Mesh update strategies in parallel finite element computations of flow problems with moving boundaries and interfaces.” Computer Methods Appl. Mech. Eng., 119(1), 73–94.
Johnson, A. A., and Tezduyar, T. E. (1999). “Advanced mesh generation and update methods for 3D flow simulations.” Comput. Mech., 23(2), 130–143.
Kamkar, S. J., Wissink, A. M., Sankaran, V., and Jameson, A. (2012). “Combined feature-driven Richardson-based adaptive mesh refinement for unsteady vortical flows.” AIAA J., 50(12), 2834–2847.
Karypis, G., and Kumar, V. (1997). METIS—A software package for partitioning unstructured graphs, partitioning meshes, and computing fill-reducing orderings of sparse matrices, version 3.0. manual, Univ. of Minnesota and Army HPC Research Center, Minneapolis.
Kenyon, A. R., and Brown, R. E. (2009). “Wake dynamics and rotor-fuselage aerodynamic interactions.” J. Am. Helicopter Soc., 54(1), 12003-1-12003-18.
Kyrkos, A., and Ekaterinaris, J. A. (2012). “Assessment of an unstructured mesh approach for CFD predictions of the NH90 fuselage rotor.” Aerosp. Sci. Technol., 19(1), 77–85.
Launder, B. E., and Spalding, D. B. (1974). “The numerical computation of turbulent flows.” Comput. Methods Appl. Mech. Eng., 3(2), 269–289.
Lee, B. S., Jung, M. S., Kwon, O. J., and Kang, H. J. (2010). “Numerical simulation of rotor-fuselage aerodynamic interaction using an unstructured overset mesh technique.” Int. J. Aeronaut. Space Sci., 11(1), 1–9.
Lee, H.-K., Yoon, S.-H., Shin, S., and Kim, C. (2008). “Coupled CFD/CSD analysis of a hovering rotor using high fidelity unsteady aerodynamics and a geometrically exact rotor blade analysis.” 34th European Rotorcraft Forum, Royal Aeronautical Society, London.
Leishman, J. G. (2006). Principles of helicopter aerodynamics, 2nd Ed., Cambridge University Press, New York.
Lim, J. W., and Dimanlig, A. C. (2009). “An investigation of the fuselage effect for HART II using a CFD/CSD coupled analysis.” 2nd Int. Forum on Rotorcraft Multidisciplinary Technology, AHS International, Fairfax, VA.
Lin, T. J., Guan, Z. Q., Chang, J. H., and Lo, S. H. (2014). “Vertex-ball spring smoothing: An efficient method for unstructured dynamic hybrid meshes.” Comput. Struct., 136, 24–33.
Liu, X.-D., Osher, S., and Chan, T. (1994). “Weighted essentially non-oscillatory schemes.” J. Comput. Phys., 115(1), 200–212.
MATLAB [Computer software]. MathWorks, Natick, MA.
McCroskey, W. J. (1995). “Vortex wakes of rotorcraft.” American Institute of Aeronautics and Astronautics (AIAA), Reston, VA.
Meakin, R. L. (2000). “Adaptive spatial partitioning and refinement for overset structured grids.” Comput. Methods Appl. Mech. Eng., 189(4), 1077–1117.
Mikkelsen, R. (2003). “Actuator disc methods applied to wind turbines.” Doctoral dissertation, Technical Univ. of Denmark, Kongens Lyngby,Denmark.
Mineck, R. E. (1999). “Application of an unstructured grid Navier-Stokes solver to a generic helicopter body.”, National Aeronautics and Space Administration (NASA), Washington, DC.
Mineck, R. E., and Gorton, S. A. (2000). “Steady and periodic pressure measurements on a generic helicopter fuselage model in the presence of a rotor.”, National Aeronautics and Space Administration (NASA), Washington, DC.
Mishra, A., Mani, K., Mavriplis, D., and Sitaraman, J. (2015). “Time dependent adjoint-based optimization for coupled fluid-structure problems.” J. Comput. Phys., 292, 253–271.
O’Brien, D. M., and Smith, M. J. (2005). “Analysis of rotor-fuselage interactions using various rotor models.” Proc., 43rd AIAA Aerospace Sciences Meeting and Exhibit, AIAA 2005-468, AIAA, Reston, VA.
Pahlke, K., and Van Der Wall, B. G. (2005). “Chimera simulations of multibladed rotors in high-speed forward flight with weak fluid-structure-coupling.” Aerosp. Sci. Technol., 9(5), 379–389.
Palacios, F., et al. (2013). “Stanford University Unstructured (SU2): An open-source integrated computational environment for multi-physics simulation and design.” Proc., 51st AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, AIAA 2013-0287, AIAA, Reston, VA.
Park, Y. M., Nam, H. J., and Kwon, O. J. (2003). “Simulation of unsteady rotor-fuselage interactions using unstructured adaptive meshes.” American Helicopter Society 59th Annual Forum, Amer Helicopter Society, Alexandria, VA.
Potsdam, M. A., Yeo, H., and Johnson, W. (2004). “Rotor airloads prediction using loose aerodynamic/structural coupling.” J. Aircraft, 43(3), 732–742.
Quon, E. W., Smith, M. J., Whitehouse, G. R., Wachspress, D. (2012). “Unsteady Reynolds-averaged Navier-Stokes-based hybrid methodologies for rotor-fuselage interaction” J. Aircr., 49(3), 961–965.
Rane, S., Kovacevic, A., Stosic, N., and Kethidi, M. (2013). “Grid deformation strategies for CFD analysis of screw compressors.” Int. J. Refrig., 36(7), 1883–1893.
Renaud, T., Costes, M., and Péron, S. (2012). “Computation of GOAHEAD configuration with chimera assembly.” Aerosp. Sci. Technol., 19(1), 50–57.
Rodriguez, C. (2012). “CFD analysis on the main-rotor blade of a scale helicopter model using overset meshing.” Masters’ degree Project, Stockholm, Sweden.
Roget, B., and Sitaraman, J. (2014). “Robust and efficient overset grid assembly for partitioned unstructured meshes.” J. Comput. Phys., 260, 1–24.
Sa, J. H., Kim, J. W., Park, S. H., Park, J. S., Jung, S. N., and Yu, Y. H. (2009). “KFLOW results of airloads on HART-II rotor blades with prescribed blade deformation.” Int. J. Aeronaut. Space Sci., 10(2), 52–62.
Sankaran, V., et al. (2010). “Application of the helios computational platform to rotorcraft flowfields.” 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, AIAA 2010-1230, AIAA, Reston, VA.
Shenoy, R., and Smith, M. J. (2011). “Unstructured overset grid adaptation for rotorcraft aerodynamic interactions.” American Helicopter Society 67th Annual Forum, American Helicopter Society International, Alexandria, VA.
Shi, J., Xu, T., Schafer, S. R., and Chen, C.-L. (2013). “Adaptive control of shock waves with a passively morphing layer for rotating blades.” J. Aerosp. Eng., 04014070.
Shih, T. H., Liou, W. W., Shabbir, A., Yang, Z., and Zhu, J. (1995). “A new eddy-viscosity model for high Reynolds number turbulent flows—Model development and validation.” Comput. Fluids, 24(3), 227–238.
Shyy, W., et al. (2010). “Recent progress in flapping wing aerodynamics and aeroelasticity.” Prog. Aerosp. Sci., 46(7), 284–327.
Sitaraman, J., et al. (2011). “Rotor loads prediction using Helios: A multi-solver framework for rotorcraft CFD/CSD analysis.” 49th AIAA 1126 Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, AIAA 2011-1123, AIAA, Reston, VA.
Sitaraman, J., Floros, M., Wissink, A., and Potsdam, M. (2010). “Parallel domain connectivity algorithm for unsteady flow computations using overlapping and adaptive grids.” J. Comput. Phys., 229(12), 4703–4723.
Smith, M. J., Shenoy, R., Kenyon, A. R., and Brown, R. E. (2009). “Vorticity-transport and unstructured RANS investigation of rotor-fuselage interactions.” 35th European Rotorcraft Forum 2009, Deutsche Gesellschaft fuer Luft und Raumfahrt (DGLR), Bonn, Germany, 494–512.
Steijl, R., and Barakos, G. (2008). “Sliding mesh algorithm for CFD analysis of helicopter rotor-fuselage aerodynamics.” Int. J. Numer. Methods Fluids, 58(5), 527–549.
Steijl, R., Barakos, G., and Badcock, K. (2006). “A framework for CFD analysis of helicopter rotors in hover and forward flight.” Int. J. Numer. Methods Fluids, 51(8), 819–847.
Steijl, R., and Barakos, G. N. (2009). “Computational study of helicopter rotor-fuselage aerodynamic interactions.” AIAA J., 47(9), 2143–2157.
Steijl, R., and Barakos, G. N. (2012). “CFD analysis of complete helicopter configurations—Lessons learnt from the GOAHEAD project.” Aerosp. Sci. Technol., 19(1), 58–71.
Sutherland, W. (1893). “The viscosity of gases and molecular force.” Philos. Mag., 36(223), 507–531.
Tanabe, Y., Saito, S., and Otani, I. (2010). “Validation of computational results of rotor/fuselage interaction analysis using rFlow3D code.”, Japan Aerospace Exploration Agency, Chofu, Tokyo.
Wachspress, D. A., Quackenbush, T. R., and Boschitsch, A. H. (2003). “Rotorcraft interactional aerodynamics with fast vortex/fast panel methods.” J. Am. Helicopter Soc., 48(4), 223–235.
Weber, J. (1974). Notes on the approximate solution of lifting-surface theory used in the R.A.E. standard method, HM Stationery Office, London.
Xu, L., and Weng, P. (2014). “High order accurate and low dissipation method for unsteady compressible viscous flow computation on helicopter rotor in forward flight.” J. Comput. Phys., 258, 470–488.
Young, C. (1974). The prediction of helicopter rotor hover performance using a prescribed wake analysis, Her Majesty's Stationery Office, London.
Zagaris, G., Campbell, M. T., Bodony, D. J., Shaffer, E., and Brandyberry, M. D. (2010). “A toolkit for parallel overset grid assembly targeting large-scale moving body aerodynamic simulations.” Proc., 19th Int. Meshing Roundtable, Springer, Berlin, 385–401.
Zhang, B., and Liang, C. (2015). “A simple, efficient, and high-order accurate curved sliding-mesh interface approach to spectral difference method on coupled rotating and stationary domains.” J. Comput. Phys., 295, 147–160.
Zhang, S., Gentela, M., Fuchiwaki, T., and Xu, H. (2009). “CFD developments for unsteady aerodynamics of rotorcraft in forward flight with realistic motion schedules.” 19th AIAA Computational Fluid Dynamics, AIAA 2009-4267, AIAA, Reston, VA.
Zhao, J., He, C., Zhang, L., Zhao, H., and Hu, P. (2011). “Coupled viscous vortex particle method and unstructured computational fluid dynamics solver for rotorcraft aerodynamic interaction analysis.” 49th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, AIAA 2011-1121, AIAA, Reston, VA.
Information & Authors
Information
Published In
Journal of Aerospace Engineering
Volume 29 • Issue 6 • November 2016
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Aug 4, 2015
Accepted: Mar 28, 2016
Published online: Jun 22, 2016
Published in print: Nov 1, 2016
Discussion open until: Nov 22, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.