Time-Dependent Second-Order Viscoelastic Fluid Flow on Rotating Cone with Heat Generation and Chemical Reaction
Publication: Journal of Aerospace Engineering
Volume 29, Issue 4
Abstract
The present analysis deals with the study of time-dependent flow of a second-order fluid on a rotating cone in the presence of chemical reaction and heat generation or absorption effects under prescribed heat flux conditions. The boundary-layer nonlinear partial differential equations of second grade fluid are first reduced into a system of ordinary differential equations with the help of transformations and nondimensional similar and nonsimilar quantities, and then solved analytically by optimal homotopy analysis method (OHAM). The effects of relevant parameters such as chemical reaction, heat generation, or absorption on local skin friction coefficients, local Nusselt number, and local Sherwood number are discussed. These effects are illustrated graphically as well as in tabular form to describe special features of the solutions.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abbasi, F. M., Alsaedi, A., and Hayat, T. (2014). “Peristaltic transport of Eyring-Powell fluid in a curved channel.” J. Aerosp. Eng., 04014037.
Abo-Eldahab, E. M., and El Aziz, M. A. (2004). “Hall current and ohmic heating effects on mixed convection boundary layer flow of a micropolar fluid from a rotating cone with power law variation in surface temperature.” Int. Commun. Heat Mass Trans., 31(5), 751–762.
Anilkumar, D., and Roy, S. (2004a). “Self-similar solution of the unsteady mixed convection flow in the stagnation point region of a rotating sphere.” Heat Mass Trans., 40(6–7), 487–493.
Anilkumar, D., and Roy, S. (2004b). “Unsteady mixed convection flow on a rotating cone in a rotating fluid.”Appl. Math. Comput., 155(2), 545–561.
Chamkha, A. J., and Aly, A. M. (2010). “Free convection flow of a nanofluid past a vertical plate in the presence of heat generation or absorption effects.” Chem. Eng. Comm., 198(3), 425–441.
Dunn, J. E., and Fosdich, R. L. (1974). “Thermodynamics stability and boundedness of fluids of complexity 2 and fluids of second grade.” Arch. Rational Mech. Anal., 56(3), 191–252.
Ece, M. C. (2005). “Free-convection flow about a cone under mixed thermal boundary conditions and a magnetic field.” Appl. Math. Model., 29(11), 1121–1134.
Ellahi, R., Hayat, T., Mahomed, F. M., and Zeeshan, A. (2010). “Exact solutions of flows of an Oldroyd 8-constant fluid with nonlinear slip conditions.” Z. Fur. Naturforsch A, 65(12), 1081–1086.
Ellahi, R., Raza, A., and Vafai, K. (2012). “Series solutions of non-Newtonian nanofluids with Reynolds’ model and Vogel’s model by means of the homotopy analysis method.” Math. Comp. Model., 55(7–8), 1876–1891.
Hayat, T., Muhammad, T., Shehzad, S., and Alsaedi, A. (2015). “Three-dimensional flow of Jeffrey nanofluid with a new mass flux condition.” J. Aerosp. Eng., 04015054.
Hering, R. G., and Grosh, R. J. (1963). “Laminar combined convection from a rotating cone.” ASME J. Heat Trans., 85(1), 29–34.
Hickman, K. C. D. (1957). “Centrifugal boiler compression still.” Indust. Engrg. Chem., 49(5), 786–800.
Himasekhar, K., Sarma, P. K., and Janardhan, K. (1989). “Laminar mixed convection from a vertical rotating cone.” Int. Commun. Heat Mass Trans., 16(1), 99–106.
Khan, Z. H., Khan, W. A., Qasim, M., and Shah, I. A. (2013). “MHD stagnation point ferrofluid flow towards a stretching sheet.” IEEE Transactions on Nanotechnology, 13(1), 35–40.
Liao, S. J. (1992). “The proposed homotopy analysis technique for the solution of nonlinear problems.” Ph.D. thesis, Shanghai Jiao Tong Univ., Shanghai, China.
Liao, S. J. (2008). “Beyond perturbation: A review on the homotopy analysis method and its applications.” Adv. Mech., 153(1), 1–34.
Liao, S. J. (2010). “An optimal Homotopy-analysis approach for strongly nonlinear differential equations.” Comm. Nonlinear Sci. Numer. Simul., 15(8), 2003–2016.
Mehmood, R., Nadeem, S., and Akbar, N. S. (2013). “Non-orthogonal stagnation point flow of a micropolar second grade fluid towards a stretching surface with heat transfer.” J. Tai. Inst. Chem. Eng., 44(4), 586–595.
Moalem, D. (1976). “Steady heat transfer with in porous medium with temperature dependent heat generation.” Int. J. Heat Mass Trans., 19(5), 529–537.
Nadeem, S., and Saleem, S. (2014a). “Theoretical Investigation of MHD nanofluid flow over a rotating cone: An optimal solutions.” Inf. Sci. Lett., 3(2), 55–62.
Nadeem, S., and Saleem, S. (2014b). “Unsteady mixed convection flow of nanofluid on a rotating cone with magnetic field.” Appl. Nanosci., 4(4), 405–414.
Nadeem, S., and Saleem, S. (2015). “An optimized study of mixed convection flow of a rotating Jeffrey nanofluid on a rotating vertical cone.” J. Comput. Theor. Nanosci., 12(1), 1–4.
Nadeem, S., and Ul Haq, R. (2012). “MHD boundary layer flow of a nano fluid past a porous shrinking sheet with thermal radiation.” J. Aerosp. Eng., 04014061.
Nazar, M., Fetecau, C., and Awan, A. U. (2010). “A note on the unsteady flow of a generalized second-grade fluid through a circular cylinder subject to a time dependent shear stress.” Nonlinear Anal. Real World Appl., 11(4), 2207–2214.
Noor, N. F. M., Abdulaziz, O., and Hashim, I. (2010). “MHD flow and heat transfer in a thin liquid film on an unsteady stretching sheet by the homotopy analysis method.” Int. J. Numer. Method Fluid, 63(3), 357–373.
Raftari, B., Parvaneh, F., and Vajravelu, K. (2013). “Homotopy analysis of the magnetohydrodynamic flow and heat transfer of a second grade fluid in a porous channel.” Energy, 59, 625–632.
Ravindran, R., Roy, S., and Momoniat, E. (2009). “Effects of injection (suction) on a steady mixed convection boundary layer flow over a vertical cone.” Int. J. Num. Method. Heat Fluid Flow, 19(3/4), 432–444.
Takhar, H. S., Chamkha, A., and Nath, G. (2003). “Unsteady mixed convection flow from a rotating vertical cone with a magnetic field.” Heat Mass Trans., 39(10), 825–834.
Wang, C. Y. (1990). “Boundary layers on rotating cones, discs and axisymmetric surfaces with a concentrated heat source.” Acta Mech., 81(3–4), 245–251.
Information & Authors
Information
Published In
Journal of Aerospace Engineering
Volume 29 • Issue 4 • July 2016
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Sep 10, 2014
Accepted: Nov 5, 2015
Published online: Jan 14, 2016
Discussion open until: Jun 14, 2016
Published in print: Jul 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.