Observer-Based -Robust Controller for Active Vibration Control of Laminated Composite Plates with an Optimally Placed IDE-PFC Actuator
Publication: Journal of Aerospace Engineering
Volume 29, Issue 3
Abstract
An attempt is made in this work to develop an observer-based modal -optimal controller for active vibration control of laminated composite plates subjected to external excitation. Collocated piezoelectric patches are used as distributed sensors (polyvinylidene fluoride, PVDF) and actuators (interdigitated electrode-piezofiber composites, IDE-PFC) along with multiple point observers. The structural modal model is developed based on finite-element methodology and is coded in a MATLAB environment. Optimal positioning of the sensor/actuator pairs is evaluated based on the norm of the sensor/actuator for a few selected structural modes and the piezo patches are accordingly placed. Response analysis is then carried out for both open- and closed-loop systems, and the effectiveness of the developed model is established. Piezoelectric actuation voltage is also calculated based on the closed-loop performance of the developed system.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alkhatib, R., and Golnaraghi, M. F. (2003). “Active structural vibration control: A review.” Shock Vibr. Digest, 35(5), 367–383.
ANSYS 11 [Computer software]. Ansys, Canonsburg, PA.
Aoki, Y., Gardonio, P., and Elliott, S. (2008). “Modelling of a piezoceramic patch actuator for velocity feedback control.” Smart Mater. Struct., 17(1), 015052.
Bailey, T., and Hubbard, J. E. (1985). “Distributed piezoelectric-polymer active vibration control of a cantilever beam.” J. Guidance Control Dyn., 8(5), 605–611.
Benjeddou, A. (2000). “Advances in piezoelectric finite element modelling of adaptive structural elements: A survey.” Comput. Struct., 76(1–3), 347–363.
Bent, A. A. (1997). “Active fiber composites for structural actuation.” Ph.D. thesis, Massachusetts Institute of Technology, Cambridge, MA.
Bhattacharya, P., Podder, D., and Sahu, A. (2014). “Effects of active damping on parametric instability of composite cylindrical shells using piezo fiber composites.” Int. J. Aerosp. Lightweight Struct., 3(4), 445–471.
Bhattacharya, P., Suhail, H., and Sinha, P. K. (1998). “Finite element free vibration analysis of smart laminated composite beams and plates.” J. Intell. Mater. Syst. Struct., 9(1), 20–28.
Bhattacharya, P., Suhail, H., and Sinha, P. K. (2000). “Analysis of smart laminated shells and a deflection control strategy with optimal voltage.” J. Reinf. Plast. Compos., 19(16), 1293–1316.
Bhattacharya, P., Suhail, H., and Sinha, P. K. (2002). “Finite element analysis and distributed control of laminated composite shells using LQR/IMSC approach.” Aerosp. Sci. Technol., 6(4), 273–281.
Boyd, S., and Barratt, C. (1991). Linear controller design: Limits of performance, Prentice Hall, Upper Saddle River, NJ.
Chee, C. Y. K., Tong, L., and Steven, G. P. (1998). “A review on the modelling of piezoelectric sensors and actuators incorporated in intelligent structures.” J. Intell. Mater. Syst. Struct., 9(1), 3–19.
Chhabra, D., Bhushan, G., and Chandna, P. (2013). “Optimal placement of piezoelectric actuators on plate structures for active vibration control using modified control matrix and singular value decomposition approach.” Int. J. Mech. Aerosp. Ind. Mechatron. Manuf. Eng., 7(3), 13–18.
Crawley, E. F., and De Luis, J. (1987). “Use of piezoelectric actuators as elements of intelligent structures.” AIAA J., 25(10), 1373–1385.
Doyle, J. C., Glover, K., Khargonekar, P. P., and Francis, B. A. (1989). “State-space solutions to standard and control problems.” IEEE Trans. Autom. Control, 34(8), 831–847.
Gawronski, W. (1998). Dynamics and control of structures, Springer, New York.
Gupta, V., Sharma, M., and Thakur, N. (2010). “Optimization criteria for optimal placement of piezoelectric sensors and actuators on a smart structure: A technical review.” J. Intell. Mater. Syst. Struct., 21(12), 1227–1243.
Hagood, N. W., and Bent, A. A. (1993). “Development of piezoelectric fiber composites for structural actuation.” Proc., 34th AIAA Structures, Structural Dynamics, and Materials Conf., American Institute of Aeronautics and Astronautics, Reston, VA.
Hagood, N. W., Kindel, R., Ghandi, K., and Gaudenzi, P. (1993). “Improving transverse actuation of piezoceramics using interdigitated surface electrodes.” Proc., SPIE 1917, Smart Structures and Materials 1993: Smart Structures and Intelligent Systems, Albuquerque, NM.
Iorga, L., Baruh, H., and Ursu, I. (2008). “A review of H∞ robust control of piezoelectric smart structures.” Appl. Mech. Rev., 61(4), 040802.
Khot, S., Yelve, N., Tomar, R., Desai, S., and Vittal, S. (2011). “Active vibration control of cantilever beam by using PID based output feedback controller.” J. Vib. Control, 18(3), 366–372.
Lazarus, K. B., Crawley, E. F., and Bohlman, J. D. (1991). “Static aeroelastic control using strain actuated adaptive structures.” J. Intell. Mater. Syst. Struct., 2(3), 386–410.
Lin, C., Heeg, J., and Crawley, E. F. (1995). “Open and preliminary closed loop results of a strain actuated active aeroelastic wing.” Proc., 36th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conf., American Institute of Aeronautics and Astronautics, Reston, VA.
Loewy, R. G. (1997). “Recent developments in smart structures with aeronautical applications.” Smart Mater. Struct., 6(5), R11.
Ma, K., and Ghasemi-Nejhad, M. (2005). “Adaptive simultaneous precision positioning and vibration control of intelligent composite structures.” J. Intell. Mater. Syst. Struct., 16(2), 163–174.
MATLAB [computer software]. Mathworks, Natick, MA.
Qiu, Z., Han, J., Zhang, X., Wang, Y., and Wu, Z. (2009). “Active vibration control of a flexible beam using a non-collocated acceleration sensor and piezoelectric patch actuator.” J. Sound Vib., 326(3), 438–455.
Qiu, Z., Zhang, X., Wu, H., and Zhang, H. (2007). “Optimal placement and active vibration control for piezoelectric smart flexible cantilever plate.” J. Sound Vib., 301(3), 521–543.
Rao, S. S., and Sunar, M. (1994). “Piezoelectricity and its use in disturbance sensing and control of flexible structures: A survey.” Appl. Mech. Rev., 47(4), 113–123.
Ro, J., and Baz, A. (1999). “Control of sound radiation from a plate into an acoustic cavity using active constrained layer damping.” Smart Mater. Struct., 8(3), 292–300.
Roy, T., and Chakraborty, D. (2009). “Optimal vibration control of smart fiber reinforced composite shell structures using improved genetic algorithm.” J. Sound Vib., 319(1–2), 15–40.
Sahu, A., Banerjee, T., GuhaNiyogi, A., and Bhattacharya, P. (2013). “Active control of radiated sound from stiffened plates using IDE-PFC actuators.” Int. J. Acoust. Vibr., 18(3), 109–116.
Swigert, C. J., and Forward, R. L. (1981). “Electronic damping of orthogonal bending modes in a cylindrical mast-theory.” Smart materials, structures and mathematical issues, C. A. Rogers, ed., Technomic Press, Lancaster, PA.
Trajkov, M., and Nestorović, T. (2012). “Optimal placement of piezoelectric actuators and sensors for smart structures.” 15th Int. Conf. on Experimental Mechanics, Faculty of Engineering, Univ. of Porto, Porto/Portugal.
Zhang, K., Scorletti, G., and Ichchou, M. (2013). “Robust active vibration control of piezoelectric flexible structures with probabilistic parametric uncertainty.” MEDYNA 2013: 1st Euro-Mediterranean Conf. on Structural Dynamics and Vibroacoustics, Marrakech, Morocco.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: May 12, 2014
Accepted: Aug 26, 2015
Published online: Nov 4, 2015
Discussion open until: Apr 4, 2016
Published in print: May 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.