Computational Modeling, Simulation, and Tailoring of Nonpenetrating Impact on a Generic Structure
Publication: Journal of Aerospace Engineering
Volume 29, Issue 3
Abstract
A computational modeling and simulation study is carried out to gain insight and formulate strategy for the design and tailoring of panel-like space structure that can withstand space debris impact without penetration. To represent a generic engineering structure, the impacted panel structure is modeled as a set of bonded plates. The analysis is based on fundamental principles, which are elaborated and numerically simulated. The objective is to identify optimum configuration in terms of loading, structural dimensions, material properties, and composite layup. The analyses are based on dynamic response with emphasis on the elastic region. The direct numerical simulation is carried out in parallel for the analysis, synthesis, parametric study, and optimization. Simulation results of impact loading by a spherical rigid body at certain velocity perpendicular to the panel show how fiber-metal laminates can be structurally tailored to achieve a nonpenetrating impact.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank Universiti Putra Malaysia (UPM) for granting Research University Grant Scheme (RUGS) No. 9378200, and the Ministry of Higher Education for granting ERGS 5527088 and FRGS 5524250 research funding, under which the present research is carried out.
References
Abrate, S. (2001). “Modeling of impacts on composite structures.” Compos. Struct., 51(2), 129–138.
AGY. (2014). “High strength glass fibres.” 〈http://www.agy.com/technical_info/graphics_PDFs/HighStrengthTechPaperEng.pdf〉 (Jun. 10, 2014).
AGY. (2015). “GLARE laminate with S-2 glass fiber.” 〈http://www.agy.com/wp-content/uploads/2014/03/GLARE_Laminate-Aerospace.pdf〉 (Feb. 6, 2015).
ANSYS. (2013a). ANSYS Autodyn user’s manual, release 15, 〈http://148.204.81.206/Ansys/150/ANSYS%20Autodyn%20Users%20Manual.pdf〉 (Jan. 15, 2015).
ANSYS. (2013b). ANSYS Mechanical user’s guide, release 15, 〈http://148.204.81.206/Ansys/150/ANSYS%20Mechanical%20APDL%20Structural%20Analysis%20Guide.pdf〉 (Jan. 15, 2015).
Botelho, E. C., Silva, R. A., Pardini, L. C., and Rezende, M. C. (2006). “Review on the development and prop continuous fibre/epoxy/aluminum hybrid composites for aircraft structures.” Mat. Res., 9(3), 247–256.
Djojodihardjo, H. (2013). “Computational simulation for analysis and synthesis of impact resilient structure.” Acta Astronautica, 91, 283–301.
Djojodihardjo, H., Jamali, H., Shokrani, A., Mustapha, F., Zahari, R., and Wiriadidjaja, S. (2012). “Computational simulation for static and dynamic load of rectangular plate in elastic region for analysis of impact resilient structure.” Appl. Mech. Mater., 225, 150–157.
Djojodihardjo, H., and Mahmud, A. S. (2014). “Finite element computational modeling and simulation studies of non-penetrating impact using fundamental principles.” Appl. Mech. Mater., 629, 62–70.
Djojodihardjo, H., Ng, P. M, and Soo, L. K. (2009). “Analysis and simulation of impact loading on elastic beam structure with case studies.” 60th Int. Astronautical Congress, International Astronautical Federation, Paris.
Djojodihardjo, H., and Ng, P. M. (2008). “Numerical simulation of impact loading on elastic structure and case studies.” 59th Int. Astronautical Congress, International Astronautical Federation, Paris.
Djojodihardjo, H., and Shokrani, A. (2010). “Generic study and finite element analysis of impact loading on elastic panel structure.” 61st Int. Astronautical Congress, International Astronautical Federation, Paris.
Djojodihardjo, H., and Soo, L. K. (2008). “Modeling and analysis of FRP car side door impact beam.” Proc., 2008 Int. Joint Conf. in Engineering—IJSE 2008, Universitas Al-Azhar Indonesia, Jakarta, Indonesia, 4–5.
Marghitu, D. B., ed. (2001). Mechanical Engineer’s handbook, Academic Press, 〈http://people.na.infn.it/~vanzanel/scambio/prog_mec/manuali/Manuale%20ingegnere%20meccanico.pdf〉 (Dec. 15, 2014).
MATLAB [Computer software]. Natick, MA, MathWorks.
Mindlin, R. D. (1951). “Influence of rotary inertia and shear on flexural motions of isotropic, elastic plates.” J. Appl. Mech., 73, 31–38.
Mitsubishi Plastics Composites America. (2014). Copper ALPOLIC Panels, 〈http://www.alpolic-americas.com/sites/default/files/Copper-Tech-Bulletin.pdf〉 (Jun. 10, 2014).
Rice, J. R. (2010). “Solid mechanics.” 〈http://esag.harvard.edu/rice/e0_Solid_Mechanics_94_10.pdf〉 (Feb. 15, 2014).
Roy, S., Mueller, I., Janapati, V., Das, S., and Chang, F.-K. (2012). “Real-time prediction of impact-induced damage for composite structures based on failure analysis and efficient database methods.” Proc., SPIE Annual Conf. on Smart Structure & NDE 2012, San Diego, 8348–8355.
Vogelesang, L. B., and Vlot, A. (2000). “Development of fibre metal laminates for advanced aerospace structures.” J. Mater. Process. Technol., 103(1), 1–5.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Feb 7, 2015
Accepted: Jun 8, 2015
Published online: Oct 5, 2015
Discussion open until: Mar 5, 2016
Published in print: May 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.