Robust Design of Cable-Network Antennas with Imperfect Cable Lengths
Publication: Journal of Aerospace Engineering
Volume 29, Issue 2
Abstract
Uncertainties can be introduced into the structural performance of cable-network antennas by inevitable manufacturing errors, which may result in failure in service. In this paper, robust optimization is first adopted to address the design of cable-network antenna structures with imperfect cable lengths. First, an analytical sensitivity analysis method is proposed to evaluate the effects of the uncertainties on the shape precision and cable tensions. Second, based on the sensitivities, the mathematical model of the robust design is established. At last, the proposed method is applied to a 3-m-diameter cable-network antenna structure. The analytical sensitivities are validated by comparing with the sensitivities computed by finite-difference method, and the feasibility of the presented robust design model is demonstrated by Monte Carlo simulations. The numerical experiments show that the robustness is greatly increased by the application of the robust design method. The results recommend that higher tension level, more elastic cables, thicker tension ties, and slenderer net cables can benefit the robust ability of cable network antenna structures.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work is supported by the National Natural Science Foundation of China under Grant Nos. 51035006 and 51205301 and the Fundamental Research Funds for Central Universities under Grant No. JY10000904019. The authors would like to express their gratitude to the staff of the Research Institute on Mechatronics, Xidian University, China, for their help in completing this paper.
References
Agrawal, P., Anderson, M., and Card, M. (1981). “Preliminary design of large reflectors with flat facets.” IEEE Trans. Antennas Propag., 29(4), 688–694.
Chi Tran, H., and Lee, J. (2010). “Advanced form-finding for cable-strut structures.” Int. J. Solids Struct., 47(14), 1785–1794.
Elishakoff, I., and Ohsaki, M. (2010). “Hybrid optimization with anti-optimization under uncertainty or making the best out of the worst.” Optimization and anti-optimization of structures under uncertainty, Imperial College Press, London, 273–325.
Hedgepeth, J. M. (1982). “Influence of fabrication tolerances on the surface accuracy of large antenna structures.” AIAA J., 20(5), 680–686.
Hiroaki, T. (2011). “RMS error estimation and correction of a space antenna based on antenna gain analyses.” Acta Astronaut., 68(7–8), 1062–1069.
Li, G., and Guan, F. L. (2006). “Optimization of pretension in net of astromesh deployable reflector and engineering application.” ACTA Mech. Solida Sin., 27(S1), 174–179.
Liu, W., and Li, D. X. (2013). “Simple technique for form-finding and tension determining of cable-network antenna reflectors.” J. Spacecraft Rockets, 50(2), 282–293.
MATLAB [Computer software]. Riddick, MA, MathWorks.
Meguro, A., Harada, S., and Watanabe, M. (2003). “Key technologies for high-accuracy large mesh antenna reflectors.” Acta Astronaut., 53(11), 899–908.
Meguro, A., Shintate, K., Usui, M., and Tsujihata, A. (2009). “In-orbit deployment characteristics of large deployable antenna reflector onboard engineering test satellite VIII.” Acta Astronaut., 65(9), 1306–1316.
Mehran, M. (2003). “Method of analyzing RMS accuracy of large antenna structures due to manufacturing tolerances.” 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conf., AIAA, Reston, VA, 1–10.
Mobrem, M., Kuehn, S., Spier, C., and Slimko, E. (2012). “Design and performance of astromesh reflector onboard soil moisture active passive spacecraft.” IEEE Aerospace Conf., IEEE, New York, 1–10.
Morterolle, S., Maurin, B., and Quirant, J. (2012). “Numerical form-finding of geotensoid tension truss for mesh reflector.” Acta Astronaut., 76, 154–163.
Ohsaki, M., Zhang, J. Y., and Elishakoff, I. (2012). “Multiobjective hybrid optimization—antioptimization for force design of tensengrity structures.” J. Appl. Mech., 79(2), 021015.
Ohsaki, M., Zhang, J. Y., and Ohishi, Y. (2008). “Force design of tensegrity structures by enumeration of vertices of feasible region.” Int. J. Space Struct., 23(2), 117–125.
Pellegrino, S., and Calladine, C. R. (1986). “Matrix analysis of statically and kinematically indeterminate frameworks.” Int. J. Solids Struct., 22(4), 409–428.
Scialino, L., et al. (2013). “Large deployable reflectors for telecom and earth observation applications.” CEAS Space J., 5(3–4), 125–146.
Thomson, M. W. (1998). “The AstroMesh deployable reflector.” IUTAM-IASS Symp. on Deployable Structures: Theory and Applications, Springer, Berlin.
Tibert, A. G. (2002). “Deployable tensegrity structure for space applications.” Ph.D. thesis, Royal Institute of Technology, Stockholm, Sweden.
Tibert, A. G., and Pellegrino, S. (2003). “Review of form-finding methods for tensegrity structures.” Int. J. Space Struct., 18(4), 209–223.
Val, D., Bljuger, F., and Yankelevsky, D. (1997). “Reliability evaluation in nonlinear analysis of reinforced concrete structures.” Struct. Saf., 19(2), 203–217.
Xu, Y., and Guan, F. L. (2013). “Structure-electronic synthesis design of deployable truss antenna.” Aerosp. Sci. Technol., 26(1), 259–267.
Yang, D. W., Qiu, Y. Y., and Bao, H. (2012). “Least-norm method for pretension optimization of mesh reflector.” J. Mech. Eng., 48(21), 22–27.
Yang, D. W., You, G. Q., and Bao, H. (2011). “Best geometry design method for paraboloid reflectors of mesh antenna.” J. Mech. Eng., 47(19), 123–128.
Zhao, J. B., Chen, W. J., and Guan, F. L. (2013). “Computational method for prestress developing of tensile cable-net structures.” J. Shanghai Jiaotong Univ., 18(2), 197–204.
Zong, Y. L., and Cao, H. J. (2014). “Optimization design of cable-frame antennas based on tension compensation method.” Appl. Mech. Mater., 496–500, 797–803.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Nov 18, 2014
Accepted: May 14, 2015
Published online: Jul 22, 2015
Discussion open until: Dec 22, 2015
Published in print: Mar 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.