Modeling and Optimization of Octostrut Vibration Isolation Platform by FRF-Based Substructuring Method
Publication: Journal of Aerospace Engineering
Volume 28, Issue 3
Abstract
This paper addresses dynamic modeling and performs optimization of a passive multistrut vibration isolation platform (VIP) in vibration isolation for an assembly of control moment gyroscopes (CMGs). Each strut of the VIP is composed of a metal rod and a three-parameter isolator in series. First, the frequency response function (FRF)–based substructuring method was developed to establish the dynamic model of a whole satellite system. This method can take into account the influence of the flexibility of the satellite bus and the CMG assembly as well as the gyroscopic effects of CMGs. Then, an optimization model was developed, and the FRF-based sensitivity analysis was employed to optimize the characteristic parameters of a strut under two objective functions. Finally, a numerical model was developed to verify the validity and effectiveness of the proposed method. The dynamic characteristics of an octostrut VIP were analyzed. The isolation performance was greatly enhanced after optimization. This study shows that the method is an effective and efficient tool that can be used in the design phase of VIPs.
Get full access to this article
View all available purchase options and get full access to this article.
References
Anderson, E. H., Fumo, J. P., and Erwin, R. S. (2000). “Satellite ultraquiet isolation technology experiment (SUITE).” Proc., IEEE Aerospace Conf., IEEE, Piscataway, NJ, 299–313.
ANSYS 12 [Computer software]. Canonsburg, PA, ANSYS.
Cobb, R. G., et al. (1999). “Vibration isolation and suppression system for precision payloads in space.” Smart Mater. Struct., 8(6), 798–812.
Cui, Y. (2007). “Research on the analysis and effect evaluation of frequency-averaged power flow in complex vibration isolation system.” Master’s thesis, Shangdong Univ., Shangdong, China.
Davis, L. P., Cunningham, D., Bicos, A. S., and Enright, M. (1994a). “Adaptable passive viscous damper: An adaptable D-strut.” Proc., Smart Structures and Materials Passive Damping Conf., SPIE, Bellingham, WA, 47–58.
Davis, L. P., Cunningham, D., and Harrell, J. (1994b). “Advanced 1.5 Hz passive viscous isolation system.” Proc., 35th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conf., AIAA, Reston, VA, 1–11.
Davis, L. P., Wilson, J., Jewell, R., and Roden, J. (1986). “Hubble space telescope reaction wheel assembly vibration isolation system.” Proc., NASA Workshop on Structural Dynamics and Control Interaction of Flexible Structures, NASA, Washington, DC, 669–690.
Fu, M. H., and Yin, J. R. (1999). “Equivalent elastic parameters of the honeycomb core.” Acta Mech. Sin., 31(1), 113–118 (in Chinese).
Kamesh, D., Pandiyan, R., and Ghosal, A. (2012). “Passive vibration isolation of reaction wheel disturbances using a low frequency flexible space platform.” J. Sound Vib., 331(6), 1310–1330.
Liu, K. C., Maghami, P., and Blaurock, C. (2008). “Reaction wheel disturbance modeling, jitter analysis, and validation tests for solar dynamics observatory.” Proc., AIAA Guidance, Navigation and Control Conf. and Exhibit, AIAA, Reston, VA.
Liu, L., Zheng, G., and Huang, W. (2006a). “Octostrut vibration isolation platform and its application to whole spacecraft vibration isolation.” J. Sound Vib., 289(4), 726–744.
Liu, L., Zheng, G., and Huang, W. (2006b). “Study of liquid viscosity dampers in octostrut platform for whole-spacecraft vibration isolation.” Acta Astronaut., 58(10), 515–522.
Luo, Q., Li, D., and Jiang, J. (2014). “Coupled dynamic analysis of a single gimbal control moment gyro cluster integrated with an isolation system.” J. Sound Vib., 333(2), 345–363.
Luo, Q., Li, D., Zhou, W., Jiang, J., Yang, G., and Wei, X. (2013). “Dynamic modelling and observation of micro-vibrations generated by a single gimbal control moment gyro.” J. Sound Vib., 332(19), 4496–4516.
Masterson, R. A., Miller, D. W., and Grogan, R. L. (2002). “Development and validation of reaction wheel disturbance models: Empirical model.” J. Sound Vib., 249(3), 575–598.
MATLAB [Computer software]. Natick, MA, MathWorks.
McMickell, M. B., Kreider, T., Hansen, E., Davis, T., and Gonzalez, M. (2007). “Optical payload isolation using the miniature vibration isolation system (MVIS-II).” Proc., SPIE 6527, Industrial and Commercial Applications of Smart Structures Technologies 2007, SPIE, Bellingham, WA, 1–13.
Preumont, A., et al. (2007). “A six-axis single-stage active vibration isolator based on Stewart platform.” J. Sound Vib., 300(3), 644–661.
Wacker, T., Weimer, L., and Eckert, K. (2005). “GOCE platform micro-vibration verification by test and analysis.” Proc., European Conf. on Spacecraft Structures, Materials and Mechanical Testing 2005 (ESA SP-581), Paris, 40.
Wang, X., Yang, Q., and Zheng, G. (2009). “Dynamic analysis and decoupling control of octo-pneumatic actuator vibration isolation platform.” Chin. J. Mech. Eng.-En, 22(1), 116–122 (in Chinese).
Wang, Z., Liu, L., and Zheng, G. (2006). “Optimal design of octostrut vibration isolation platform.” J. Guid. Contr. Dyn., 29(3), 749–753.
Zhang, Y. (2012). “Jitter control for optical payload on satellites.” J. Aerosp. Eng., 04014005.
Zhang, Y., and Xu, S. J. (2012). “Vibration isolation platform for control moment gyroscopes on satellites.” J. Aerosp. Eng., 641–652.
Zhang, Y., Zhang, J. R., and Xu, S. J. (2012a). “Influence of flexible solar arrays on vibration isolation platform of control moment gyroscopes.” Acta Mech. Sin., 28(5), 1479–1487.
Zhang, Y., Zhang, J. R., and Xu, S. J. (2012b). “Parameters design of vibration isolation platform for control moment gyroscopes.” Acta Astronaut., 81(2), 645–659.
Zhou, W. Y., Aglietti, G. S., and Zhang, Z. (2011). “Modelling and testing of a soft suspension design for a reaction/momentum wheel assembly.” J. Sound Vib., 330(18), 4596–4610.
Zhou, W. Y., and Li, D. X. (2012). “Design and analysis of an intelligent vibration isolation platform for reaction/momentum wheel assemblies.” J. Sound Vib., 331(13), 2984–3005.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Apr 17, 2013
Accepted: Feb 7, 2014
Published online: Jul 18, 2014
Discussion open until: Dec 18, 2014
Published in print: May 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.