Scramjet Isolator Shock-Train Leading-Edge Position Modeling Based on Equilibrium Manifold
Publication: Journal of Aerospace Engineering
Volume 28, Issue 2
Abstract
A dynamic model showing the relationship between backpressure and shock-train leading edge (STLE) is necessary in the development of a STLE automatic control algorithm. In this research, a nonlinear dynamic model based on equilibrium manifold expansion is presented to locate the STLE position in a large range of operation conditions. The initially started flow field of a hypersonic inlet at different throttling ratios was experimentally studied at freestream Mach numbers 4.5–6.0. The nominal STLE position was defined by the pressure ratio method. The variation of STLE position with backpressure and freestream Mach number was then discussed. Testing with the experimental data, past models could only be used locally, whereas for large range of operation conditions they lose effectiveness. Therefore, the nonlinear dynamic modeling method based on equilibrium manifold is introduced to solve this problem, the simulation results, and comparisons at large range of operation conditions show its validity.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by China National Natural Science Foundation (No. 91216105, No. 91116001, No. 51121004).
References
Chang, J., Wang, L., Yu, D., and Bao, W. (2012a). “Real-time unstart prediction and detection of hypersonic inlet based on recursive Fourier transform.” 48th AIAA/ASME/SAE/ASEE Joint Propulsion Conf. and Exhibit, AIAA, Atlanta, GA, 1–23.
Chang, J. T., Wang, L., Bao, W., Qin, J., Niu, J., and Xue, W. (2012b). “Novel oscillatory pattern of hypersonic inlet Buzz.” J. Propul. Power, 28(6), 1214–1221.
Culick, F. E. C., and Rogers, T. (1983). “The response of normal shocks in diffusers.” AIAA J., 21(10), 1382–1390.
Donbar, J. M. (2012). “Shock train position control in an axisymmetric scramjet combustor flowpath.” 48th AIAA/ASME/SAE/ASEE Joint Propulsion Conf. and Exhibit, AIAA, Atlanta, GA, 1–8.
Fischer, Ch., and Olivier, H. (2011). “Experimental investigation of the shock train in an isolator of a Scramjet inlet.” 17th AIAA Int. Space Planes and Hypersonic Systems and Technologies Conf., AIAA, San Francisco, CA, 1–15.
Huebner, L. D., Rock, K. E., Ruf, E. G., Witte, D. W., and Andrew, E. H. (2001). “Hyper-X flight engine ground testing for X43-A flight risk reduction.” J. Spacecr. Rockets, 38(6), 844–852.
Hutzel, J. R., Decker, D. D., Cobb, R. G., King, P. I., Veth, M. J., and Donbar, J. (2011a). “Scramjet isolator shock train location techniques.” 49th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, AIAA, Orlando, FL, 1–21.
Hutzel, J. R., Decker, D. D., and Donbar, J. M. (2011b). “Scramjet isolator shock-train leading-edge location modeling.” 17th AIAA Int. Space Planes and Hypersonic Systems and Technologies Conf., AIAA, San Francisco, CA, 1–15.
Le, D. B., Goyne, C. P., and Krauss, R. H. (2008). “Shock train leading-edge detection in a dual-mode Scramjet.” J. Propul. Power, 24(5), 1035–1041.
MacMartin, D. G. (2004). “Dynamics and control of shock motion in a near-isentropic inlet.” J. Aircr., 41(4), 846–853.
Matsuo, K., Miyazato, Y., and Kim, H. D. (1999). “Shock train and pseudo-shock phenomena in internal gas flows.” Prog. Aerosp. Sci., 35(1), 33–100.
Matrix Laboratory (MATLAB) [Computer software]. 7.10.0.499 (R2010a) The MathWorks, Natick, MA.
Mutzman, R., and Murphy, S. (2011). “X-51 development: A chief engineer’s perspective.” 17th AIAA Int. Space Planes and Hypersonic Systems and Technologies Conf., AIAA, Reston, VA, 1–59.
Park, I. S., Kim, S.-K., Yeom, H.-W., Sung, H.-G., Park, J.-W., and Tahk, M.-J. (2011). “Control-oriented model for intake shock position dynamics in ramjet engine.” J. Propul. Power, 27(2), 499–503.
Sajben, M., and Said, H. (2001). “Acoustic-wave/blade-row interactions establish boundary conditions for unsteady inletflows.” J. Propul. Power, 17(5), 1090–1099.
Srikant, S., Wagner, J. L., Valdivia, A., Akella, M. R., and Clemens, N. (2010). “Unstart detection in a simplified-geometry hypersonic inlet-isolator flow.” J. Propul. Power, 26(5), 1059–1071.
Tan, H., Li, L., Wen, Y., and Zhang, Q. F. (2011). “Experimental investigation of the unstart process of a generic hypersonic inlet.” AIAA J., 49(2), 279–288.
Voland, R., Auslender, A., Smart, M., Roudakov, A., Semenov, V., and Kopchenov, V. (1999). “CIAM/NASA mach 6.5 Scramjet flight and ground test.” AIAA Paper1–9.
Wagner, J. L., Yuceil, K. B., Valdivia, A., Clemens, N. T., and Dolling, D. S. (2009). “Experimental investigation of unstart in an inlet/isolator model in mach 5 flow.” AIAA J., 47(6), 1529–1542.
Walker, S. H., Rodgers, F., and Paull, A. (2008). “HyCAUSE flight test program.” 15th AIAA Int. Space Planes and Hypersonic Systems and Technologies Conf., AIAA, Dayton, OH, 1–14.
Willoh, R. G. (1968). “A mathematics analysis of supersonic inlet dynamic.” NASA Technical Note, NASA, Washington, DC, D-4969.
Yu, D., Cui, T., and Bao, W. (2005). “Equilibrium manifold linearization model for normal shock position control systems.” J. Aircr., 42(5), 1344–1347.
Yu, D., Zhao, H., Xu, Z., Sui, Y., and Liu, J. (2011). “An approximate nonlinear model for aeroengine control.” J. Aerosp. Eng., 225(12), 1366–1381.
Zhao, H., Liu, J., and Yu, D. (2011). “Approximate nonlinear modeling and feedback linearization control for aeroengines.” J. Eng. Gas Turbines Power, 133(11), 111601, 1–10.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Apr 3, 2013
Accepted: Oct 3, 2013
Published online: Oct 5, 2013
Discussion open until: Dec 2, 2014
Published in print: Mar 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.