Building a Lunar or Martian Launch Pad with In Situ Materials: Recent Laboratory and Field Studies
Publication: Journal of Aerospace Engineering
Volume 26, Issue 1
Abstract
Building launch pads on extraterrestrial surfaces has gained interest as a way to improve landing safety and mitigate dust problems caused by launch and landing. On Mars, a landing pad may be a necessity for the safe landing of a large human-carrying vehicle. There have been many proposed surface stabilization technologies, and evaluation of the technologies uses regolith simulants and terrestrial analogue sites. Recent work on the lunar simulants used in sintering studies and results from recent field demonstrations are presented here. Laboratory studies on simulants focused on determining how the composition of the simulant affected sintering. The glass content of the lunar simulant was found to be a key parameter in determining when a simulant sintered. Field demonstrations of a solar concentrator and a resistive heating sintering system are described. Field demonstrations factor in not only the simulant but also larger-scale thermal effects that are not present in laboratory tests.
Get full access to this article
View all available purchase options and get full access to this article.
References
Allen, C. C. (1998). “Bricks and ceramics.” Proc., Workshop on Using In Situ Resources for Construction of Planetary Outposts, Lunar and Planetary Institute, Houston, 1–2.
Allen, C. C., Graf, J. C., and McKay, D. S. (1994). “Sintering bricks on the Moon.” Engineering, construction and operations in space IV, R. G. Galloway and S. Lokaj, eds., ASCE, Reston, VA, 1220–1229.
Balla, V. K., Roberson, L. B., O’Connor, G. W., Trigwell, S., Bose, S., and Bandyopadhyay, A. (2011). “First demonstration on direct laser fabrication of lunar regolith parts.” Rapid Prototyp. J., 18(6), 451–457.
Battler, M. M., and Spray, J. G. (2009). “The Shawmere anorthosite and OB-1 as lunar highland regolith simulants.” Planet. Space Sci., 57(14–15), 2128–2131.
Cardiff, E. H., and Hall, B. C. (2008). “A dust mitigation vehicle utilizing direct solar heating.” Proc., Joint Annual Meeting of LEAG-ICEUM-SRR, Lunar and Planetary Institute, Houston.
Carroll, W. F., Blair, P. M., Jr., Hawthorne, E. I., Jacobs, S., and Leger, L. (1972). “Returned Surveyor 3 hardware: Engineering results.” NASA-SP-284. Analysis of Surveyor 3 material and photographs returned by Apollo 12, U.S. Government Printing Office, Washington, DC, 15–21.
Cooke, D. (2006). “Exploration strategy and architecture.” Proc., 2nd Space Exploration Conf., American Institute of Aeronautics and Astronautics, Reston, VA.
Gaier, J. R. (2007). “The effects of lunar dust on EVA systems during the Apollo missions.” NASA/TM-2005-213610/REV1, NASA Center for Aerospace Information, Hanover, MD.
Heiken, G. H., Vaniman, D. T., and French, B. M. (1991). Lunar sourcebook: A user's guide to the Moon, Cambridge University Press, New York.
Hintze, P. E. (2010). “Building a vertical take off and landing pad using in situ materials.” Space Manufacturing 14, Space Studies Institute, Mojave, CA.
Hintze, P. E., Curran, J., and Back, T. (2009). “Lunar surface stabilization via sintering or the use of heat cured polymers.” Proc., 47th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, American Institute of Aeronautics and Astronautics, Reston, VA.
Immer, C., Lane, J., Metzger, P., and Clements, S. (2011a). “Apollo video photogrammetry estimation of plume impingement effects.” Icarus, 214(1), 46–52.
Immer, C., Metzger, P., Hintze, P. E., Nick, A., and Horan, R. (2011b). “Apollo 12 Lunar Module exhaust plume impingement on Lunar Surveyor III.” Icarus, 211(2), 1089–1102.
Ishikawa, Y., Sasaki, T., and Higasayama, T. (1992). “Simple and efficient methods to produce construction materials for lunar and Mars bases.” Engineering, Construction and Operations in Space III: Space 92: Proc., 3rd Int. Conf., ASCE, Reston, VA, 1335–1346.
Jaffe, L. D. (1971). “Blowing of lunar soil by Apollo 12: Surveyor 3 evidence.” Science, 171(3973), 798–799.
Khan-Mayberry, N. (2007). “The lunar environment: Determining the health effects of exposure to Moon dusts.” Acta Astronautica, 63(7–10), 1006–1014.
Kingery, W. D., Bowen, H. K., and Uhlmann, D. R. (1976). Introduction to ceramics, 2nd Ed., Wiley, New York.
Meek, T. T., Vaniman, D. T., Cocks, F. H., and Wright, R. A. (1985). “Microwave processing of lunar materials: Potential applications.” Lunar bases and space activities of the 21st century, Lunar and Planetary Institute, Houston, 479–486.
Metzger, P. T., Lane, J. E., Immer, C. D., and Clements, S. (2010). “Cratering and blowing soil by rocket engines during lunar landings.” Lunar settlements, H. Benaroya, ed., CRC Press, Boca Raton, FL, 551–576.
Metzger, P. T., Li, X., Immer, C. D., and Lane, J. E. (2009). “ISRU implications for lunar and martian plume effects.” Proc., 47th AIAA Aerospace Sciences Meeting Including The New Horizons Forum and Aerospace Exposition, American Institute of Aeronautics and Astronautics, Reston, VA.
Metzger, P. T., Smith, J., and Lane, J. E. (2011). “Phenomenology of soil erosion due to rocket exhaust on the Moon and the Mauna Kea lunar test site.” J. Geophys. Res., 116(6), E06005.
Ming, D. W., et al. (2006). “Geochemical and mineralogical indicators for aqueous processes in the Columbia Hills of Gusev crater, Mars.” J. Geophys. Res., 111(2), E02S12.
Nakamura, T., and Smith, B. K. (2010). “Solar thermal power system for lunar ISRU applications: Result of ISRU analog test, Mauna Kea, HI.” Proc., AIAA SPACE 2010 Conf. and Exposition, American Institute of Aeronautics and Astronautics, Reston, VA.
Noble, S. (2007). “Assessing the dangers of Moon dust.” Proc., 2nd National Conf. on USGS Health Related Research, USGS, Reston, VA.
Ray, C. S., Reis, S. T., Sen, S., and O’Dell, J. S. (2010). “JSC-1A lunar soil simulant: Characterization, glass formation, and selected glass properties.” J. Non-Cryst. Solids, 356(44–49), 2369–2374.
Roberson, L. B., Hintze, P., and O’Connor, G. W. (2009). “A conceptual study for the autonomous direct forming of lunar regolith into Flexlock geomats for lunar surface operations.” Proc., 47th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, American Institute of Aeronautics and Astronautics, Reston, VA.
Rushing, J. F., and Tingle, J. S. (2006). “Dust control field handbook.” ERDC/GSL SR-06-7, Geotechnical and Structures Laboratory, U.S. Army Engineer Research and Development Center, Vicksburg, MS.
Schrader, C. M., et al. (2009). “Lunar regolith characterization for simulant design and evaluation using figure of merit algorithms.” Proc., 47th AIAA Aerospace Sciences Meeting, American Institute of Aeronautics and Astronautics, Reston, VA.
Schrader, C. M., Rickman, D. L., McLemore, C. A., and Fikes, J. C. (2010). “Lunar regolith simulant user’s guide.” NASA/TM-2010-216446, NASA Center for Aerospace Information, Hanover, MD.
Squyres, S. W., et al. (2006). “Rocks of the Columbia Hills.” J. Geophys. Res., 111(2), E02S11.
Stoeser, D., Wilson, S., and Rickman, D. (2010). “Design and specifications for the highland regolith prototype simulants NU-LHT-1M and -2M.” NASA/TM-2010-216438, NASA Center for Aerospace Information, Hanover, MD.
Street, K. W., Jr., Ray, C., Rickman, D., and Scheiman, D. A. (2010). “Thermal properties of lunar regolith simulants.” NASA/TM-2010-216348, NASA Center for Aerospace Information, Hanover, MD.
Taylor, L. A., and Meek, T. T. (2005). “Microwave sintering of lunar soil: Properties, theory, and practice.” J. Aerosp. Eng., 18(3), 188–196.
Wagner, S. A. (2006). “The Apollo experience lessons learned for constellation lunar dust management.” NASA/TP-2006-213726, NASA Center for Aerospace Information, Hanover, MD.
Wang, A., et al. (2006). “Evidence of phyllosilicates in Wooly Patch, an altered rock encountered at West Spur, Columbia Hills, by the Spirit rover in Gusev crater, Mars.” J. Geophys. Res., 111(2), E02S16.
Information & Authors
Information
Published In
Journal of Aerospace Engineering
Volume 26 • Issue 1 • January 2013
Pages: 134 - 142
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Sep 1, 2011
Accepted: Jan 9, 2012
Published online: Dec 15, 2012
Published in print: Jan 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.