Analysis of Hydronic Heating and Cooling Systems in Commercial Buildings Using CBECS Microdata
Publication: Journal of Architectural Engineering
Volume 28, Issue 3
Abstract
Hydronic heating and cooling systems are among the most common types of heating and cooling systems installed in older existing buildings, especially commercial buildings. According to the 2012 Commercial Building Energy Consumption Survey (CBECS) data set, hydronic heating systems in the United States include two main systems: (i) boilers inside the building represented with a boiler system and (ii) district steam and hot water systems represented with district heating, which are connected to seven different types of zone-level equipment. Similarly, there are two main hydronic cooling systems: central chillers inside (or adjacent to) the building and district chilled water piped in from outside the building. Chiller systems are investigated based on three different classes: (1) water-cooled, (2) air-cooled, and (3) absorption chillers. This study presents a deep analysis of the 2012 CBECS microdata to characterize hydronic heating and cooling systems by year of construction, census division, building area, building site hydronic system energy use index (EUI), and the types of mechanical systems. The results show that nearly 65% of commercial buildings built before 1990 utilize hydronic heating systems. Hydronic heating and cooling system design are a function of a building area. District heating systems are considered as the main heating systems in buildings with an area greater than 18,600 m2 (200,000 ft2). In addition, systems with central chillers inside the buildings are responsible for providing cooling for more than 50% of the commercial buildings with areas greater than 9,000 m2 (∼100,000 ft2). Among the types of chiller systems, the chiller systems connected to the central air handling units, fan coil units, and duct reheats are the most common systems for large buildings. The results of this building stock characterization provide useful insights into the characteristics of hydronic heating and cooling systems in US commercial buildings.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was partially funded by an ASHRAE New Investigator Award to Mohammad Heidarinejad.
References
“2018 Chicago Energy Benchmarking Report.” 2018. Accessed November 24, 2021. https://www.chicago.gov/content/dam/city/progs/env/EnergyBenchmark/2018_Chicago_Energy_Benchmarking.
Aswani, A., N. Master, J. Taneja, A. Krioukov, D. Culler, and C. Tomlin. 2012. “Energy-efficient building HVAC control using hybrid system LBMPC.” IFAC Proc. Vol. 45 (17): 496–501. https://doi.org/10.3182/20120823-5-NL-3013.00069.
Belzer, D. B. 2007. Estimates of U.S. commercial building electricity intensity trends: Issues related to end-use and supply surveys. DE-AC05-76RL01830. Richland, WA: Pacific Northwest National Laboratory.
CEC (California Energy Commission). 2020. “Building Energy Benchmarking Program.” Accessed November 24, 2021. https://www.energy.ca.gov/programs-and-topics/programs/building-energy-benchmarking-program.
Chung, W., Y. V. Hui, and Y. Miu Lam. 2006. “Benchmarking the energy efficiency of commercial buildings.” Appl. Energy 83 (1): 1–14. https://doi.org/10.1016/j.apenergy.2004.11.003.
DOE. 2001. High-performance commercial buildings (A technology roadmap). DOE/GO-102001-1343. Washington, DC: U.S. Dept. of Energy, Office of Building Technology, State and Community Programs.
Guan, J., N. Nord, and S. Chen. 2016. “Energy planning of university campus building complex: Energy usage and coincidental analysis of individual buildings with a case study.” Energy Build. 124: 99–111. https://doi.org/10.1016/j.enbuild.2016.04.051.
Heidarinejad, M., M. Dahlhausen, S. McMahon, C. Pyke, and J. Srebric. 2014. “Cluster analysis of simulated energy use for LEED certified U.S. office buildings.” Energy Build. 85: 86–97. https://doi.org/10.1016/j.enbuild.2014.09.017.
NYC Mayor’s Office of Sustainability. 2009. “Green Buildings & Energy Efficiency.” Accessed November 24, 2021. https://www1.nyc.gov/site/sustainability/reports-and-data/energy-and-water-map.page.
Pérez-Lombard, L., J. Ortiz, and C. Pout. 2008. “A review on buildings energy consumption information.” Energy Build. 40 (3): 394–398. https://doi.org/10.1016/j.enbuild.2007.03.007.
Salimian Rizi, B., A. S. Ali, C. Riley, B. Stephens, and M. Heidarinejad. 2020. “Energy analysis of steam distribution system using a physics-based model: A campus building case study.” In 2020 Building Performance Analysis Conf. and SimBuild. Atlanda, GA: ASHRAE.
Tso, G. K. F., and J. Guan. 2014. “A multilevel regression approach to understand effects of environment indicators and household features on residential energy consumption.” Energy 66: 722–731. https://doi.org/10.1016/j.energy.2014.01.056.
USEIA (US Energy Information Administration). 2012. “CBECS 2012 Codebook.” Accessed November 24, 2021. https://www.eia.gov/consumption/commercial/data/2012/xls/2012microdata_codebook.xlsx.
USEIA (US Energy Information Administration). 2015. “2012 CBECS Survey Data.” Accessed November 24, 2021. https://www.eia.gov/consumption/commercial/data/2012/index.php?view=microdata.
USEIA (US Energy Information Administration). 2016. “User’s Guide to the 2012 CBECS.” Accessed November 24, 2021. https://www.eia.gov/consumption/commercial/data/2012/pdf/user_guide_public_use_aug2016.pdf.
USEIA (US Energy Information Administration). 2020. “2018 Commercial Buildings Energy Consumption Survey Preliminary Results.” Accessed November 24, 2021. https://www.eia.gov/consumption/commercial/.
Winiarski, D. W., M. A. Halverson, J. B. Butzbaugh, A. L. Cooke, G. K. Bandyopadhyay, and D. B. Elliott. 2018. Analysis for building envelopes and mechanical systems using 2012 CBECS data. Richland, WA: Pacific Northwest National Laboratory.
Winiarski, D. W., W. Jiang, and M. A. Halverson. 2006. Review of pre- and post-1980 buildings in CBECS – HVAC equipment. PNNL-20346. Richland, WA: Pacific Northwest National Laboratory.
Yalcintas, M., and U. Aytun Ozturk. 2007. “An energy benchmarking model based on artificial neural network method utilizing US commercial buildings energy consumption survey (CBECS) database.” Int. J. Energy Res. 31 (4): 412–421. https://doi.org/10.1002/er.1232.
Yan, L. 2014. “Energy consumption analyses of frequently-used HVAC system types in high performance office buildings.” M.Sc. thesis, Dept. of Architectural Engineering, Pennsylvania State University.
Yun, G. Y., and K. Steemers. 2011. “Behavioural, physical and socio-economic factors in household cooling energy consumption.” Appl. Energy 88 (6): 2191–2200. https://doi.org/10.1016/j.apenergy.2011.01.010.
Information & Authors
Information
Published In
Journal of Architectural Engineering
Volume 28 • Issue 3 • September 2022
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Sep 21, 2021
Accepted: Mar 1, 2022
Published online: Apr 27, 2022
Published in print: Sep 1, 2022
Discussion open until: Sep 27, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.