Investigation, Analysis, and Treatment Testing for the Mission Church, Tumacácori National Historical Park
Publication: Journal of Architectural Engineering
Volume 26, Issue 1
Abstract
The adobe mission church (circa 1801) at Tumacácori National Historical Park in Arizona was damaged in an intense winter storm in 2010. To mitigate the damage and to address building envelope vulnerabilities, investigators completed a study of the hygrothermal behavior of the dome, including characterization of soluble salts and environmental conditions that result in salt damage, identification of structural and seismic vulnerabilities, performance testing (lab and in situ) of lime-based renders for exterior surfaces of the church, and an assessment of structural wood. Hygrothermal modeling of the dome indicates that heavy rain events that occur every 5–10 years result in moisture infiltration and damage to the decorated plasters on the dome interior. The structural assessment identified conditions requiring repair, strengthening, and/or improvements that will result in improved ductility of building assemblies. The wood assessment identified species and grade of structural wood members that require repair, reinforcement, or replacement for developing seismic retrofit designs. Natural hydraulic lime (NHL)–based stuccos offer the best combination of performance properties, resistance to erosion, low absorption and debonding, and acceptable flexural strength and water vapor transmission.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research presented here was the result of projects conducted through the Colorado Plateau Cooperative Ecosystem Studies Unit between the University of New Mexico and the National Park Service. Tumacácori National Historical Park provided the funding. Special thanks are owing to Jeremy Moss, Mathew Guebard, Ray Madril, and Eric Herrera of the National Park Service, and to Pat Taylor, who supervised the application of renders to test walls.
References
ASTM. 2008. Standard test method for flexural strength of hydraulic-cement mortars. ASTM C348. West Conshohocken, PA: ASTM.
ASTM. 2010a. Standard test method for field determination of water penetration of masonry wall surfaces. ASTM C1601. West Conshohocken, PA: ASTM.
ASTM. 2010b. Standard test methods for water vapor transmission of materials. ASTM E96. West Conshohocken, PA: ASTM.
ASTM. 2011. Standard test method for compressive strength of hydraulic cement mortars. ASTM C109. West Conshohocken, PA: ASTM.
ASTM. 2016. Standard practice for establishing structural grades and related allowable properties for visually graded lumber. ASTM D245. West Conshohocken, PA: ASTM.
Crosby, A. 1978. Historic structure report: Architectural data. Denver: US Dept. of the Interior, National Park Service, Denver Service Center.
Ruiz-Agudo, E., F. Mees, P. Jacobs, and C. Rodriguez-Navarro. 2007. “The role of saline solution properties on porous limestone salt weathering by magnesium and sodium sulfates.” Environ. Geol. 52 (2): 269–281. https://doi.org/10.1007/s00254-006-0476-x.
Tolles, E. L. 1989. “Seismic studies on small-scale models of adobe houses.” Ph.D. dissertation, Dept. of Civil Engineering, Stanford Univ.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Apr 2, 2018
Accepted: May 31, 2019
Published online: Jan 16, 2020
Published in print: Mar 1, 2020
Discussion open until: Jun 16, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.