Friction-Based Connectors for Timber Shear Walls: Static Experimental Tests
Publication: Journal of Architectural Engineering
Volume 25, Issue 2
Abstract
Timber shear wall systems dissipate energy through nail bending, nail withdrawal, and crushing of the sheathing around the nail hole. This dissipation mechanism is a pinching hysteretic response. Use of high-damping devices is an effective method for improving the earthquake resistance of a building. In this study, three wood friction connections were developed and tested to increase the damping of the wood shear walls. In this paper, cyclic experimental tests of the connectors and shear walls are presented. In addition, results of long-term performance assessments are also presented. The cyclic test response of the connections exhibited a rectangular hysteretic response, and the shear wall systems had an equivalent viscous damping ratio of around 0.3.
Get full access to this article
View all available purchase options and get full access to this article.
References
Awaludin, A., T. Hirai, T. Hayashikawa, Y. Sasaki, and A. Oikawa. 2008. “Effects of pretension in bolts on hysteretic responses of moment carrying timber joints.” J. Wood Sci. 54 (2): 114–120. https://doi.org/10.1007/s10086-007-0914-8.
Chui, Y. H., C. Ni, and L. Jiang. 1998. “Finite-element model for nailed wood joints under reversed cyclic load.” J. Struct. Eng. 124 (1): 96–103. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:1(96).
Dinehart, D. W., A. S. Blasetti, and H. W. Shenton, III. 2008. “Experimental cyclic performance of viscoelastic gypsum connections and shear walls.” J. Struct. Eng. 134 (1): 87–95. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:1(87).
Dinehart, D. W., H. W. Shenton, and T. E. Elliott. 1999. “The dynamic response of wood-frame shear walls with viscoelastic dampers.” Earthquake Spectra 15 (1): 67–86. https://doi.org/10.1193/1.1586029.
Filiatrault, A. 1990. “Analytical predictions of the seismic response of friction damped timber shear walls.” Earthquake Eng. Struct. Dyn. 19 (2): 259–273. https://doi.org/10.1002/eqe.4290190209.
Filiatrault, A., H. Isoda, and B. Folz. 2003. “Hysteretic damping of wood framed buildings.” Eng. Struct. 25 (4): 461–471. https://doi.org/10.1016/S0141-0296(02)00187-6.
Hashemi, A., R. Masoudnia, and P. Quenneville. 2016. “A numerical study of coupled timber walls with slip friction damping devices.” Constr. Build. Mater. 121 (Sep): 373–385. https://doi.org/10.1016/j.conbuildmat.2016.05.160.
Hashemi, A., P. Zarnani, R. Masoudnia, and P. Quenneville. 2018. “Experimental testing of rocking cross-laminated timber walls with resilient slip friction joints.” J. Struct. Eng. 144 (1): 04017180. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001931.
Iqbal, A., S. Pampanin, A. Palermo, and A. H. Buchanan. 2015. “Performance and design of LVL walls coupled with UFP dissipaters.” J. Earthquake Eng. 19 (3): 383–409. https://doi.org/10.1080/13632469.2014.987406.
Japan 2X4 Home Builders Association. 2002. Structural design guidelines for wood frame construction. [In Japanese.] Tokyo: Japan 2X4 Home Builders Association.
Kitamori, A. 2009. “Study on interlocking timber joint dependent on friction and compression perpendicular to grain of wood.” [In Japanese.] Ph.D. thesis, Dept. of Research Institute for Sustainable Humanosphere, Kyoto Univ.
Kollmann, F. F. P., E. W. Kuenzi, and A. J. Stamm. 1968. Principles of Wood Sci. Technol II: Wood based material, 214–216. Berlin: Springer-Verlag.
Komoto, K., M. Murakami, and M. Inayama. 2008. “Formulated to predict the elastic and plastic behavior of sheathed walls with uncovered posts in conventional post and beam structures.” [In Japanese.] J. Struct. Constr. Eng. AIJ. 73 (629): 1127–1134. https://doi.org/10.3130/aijs.73.1127.
Kuwamura, H. 2011. “Coefficient of friction between wood and steel under heavy contact-study on steel-framed timber structure part 9.” [In Japanese.] J. Struct. Constr. Eng. AIJ. 76 (666): 1469–1478. https://doi.org/10.3130/aijs.76.1469.
Lam, F., H. G. L. Prion, and M. He. 1997. “Lateral resistance of wood shear walls with large sheathing panels.” J. Struct. Eng. 123 (12): 1666–1673. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:12(1666).
Li, Z., M. He, H. Dong, Z. Shu, and X. Wang. 2018. “Friction performance assessment of non-asbestos organic (NAO) composite-to-steel interface and polytetrafluoroethylene (PTFE) composite-to-steel interface: Experimental evaluation and application in seismic resistant structures.” Constr. Build. Mater. 174 (Jun): 272–283. https://doi.org/10.1016/j.conbuildmat.2018.04.096.
Loo, W. Y., C. Kun, P. Quenneville, and N. Chouw. 2014. “Experimental testing of a rocking timber shear wall with slip-friction connectors.” Earthquake Eng. Struct. Dyn. 43 (11): 1621–1639. https://doi.org/10.1002/eqe.2413.
López-Almansa, F., E. Segués, and I. R. Cantalapiedra. 2014. “A new steel framing system for seismic protection of timber platform frame buildings. Implementation with hysteretic energy dissipators.” Earthquake Eng. Struct. Dyn. 44 (8): 1181–1202. https://doi.org/10.1002/eqe.2507.
McKenzie, W. M., and H. Karpovich. 1968. “The frictional behaviour of wood.” Wood Sci. Technol. 2 (2): 139–152. https://doi.org/10.1007/BF00394962.
Meng, Q., T. Hirai, and A. Koizumi. 2008. “Frictional coefficient between timber and some structural sheet materials.” [In Japanese.] Mokuzai Gakkaishi. 54 (5): 281–288. https://www.jstage.jst.go.jp/article/jwrs/54/5/54_5_281/_article/-char/en.
Murase, Y. 1977. “Effect of surface roughness on friction between wood and steel.” [In Japanese.] J. Jpn. Wood Res. Soc. 23 (2): 76–81.
Murase, Y. 1980. “Frictional properties of wood at high sliding speed.” [In Japanese.] J. Jpn. Wood Res. Soc. 26 (2): 61–65.
Nguyen, T. T., T. N. Dao, S. Aaleti, J. W. van de Lindt, and K. J. Fridley. 2018. “Seismic assessment of a three-story wood building with an integrated CLT-lightframe system using RTHS.” Eng. Struct. 167 (Jul): 695–704. https://doi.org/10.1016/j.engstruct.2018.01.025.
Pei, S., J. W. van de Lindt, C. Ni, and S. E. Pryor. 2010. “Experimental seismic behavior of a five-storey double-midply wood shear wall in a full scale building.” Can. J. Civ. Eng. 37 (9): 1261–1269. https://doi.org/10.1139/L10-058.
Pu, W., C. Liu, H. Zhang, and K. Kasai. 2016. “Seismic control design for slip hysteretic timber structures based on tuning the equivalent stiffness.” Eng. Struct. 128 (Dec): 199–214. https://doi.org/10.1016/j.engstruct.2016.09.041.
Seki, M., H. Sugimoto, T. Miki, K. Kanayama, and Y. Furuta. 2013. “Wood friction characteristics during exposure to high pressure: Influence of wood/metal tool surface finishing conditions.” J. Wood Sci. 59 (1): 10–16. https://doi.org/10.1007/s10086-012-1295-1.
Schneider, J., E. Karacabeyli, M. Popovski, S. F. Stiemer, and S. Tesfamariam. 2014. “Damage assessment of connections used in cross laminated timber subject to cyclic loads.” ASCE J. Perform Constr. Facilit. 28 (6): A4014008.
Shenton, H. W., III, D. W. Dinehart, and T. E. Elliott. 1998. “Stiffness and energy degradation of wood frame shear walls.” Can. J. Civ. Eng. 25 (3): 412–423. https://doi.org/10.1139/l97-108.
Symans, M. D., F. A. Charney, A. S. Whittaker, M. C. Constantinou, C. A. Kircher, M. W. Johnson, and R. J. McNamara. 2008. “Energy dissipation systems for seismic applications: Current practice and recent developments.” J. Struct. Eng. 134 (1): 3–21. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:1(3).
Symans, M. D., W. F. Cofer, and K. J. Fridley. 2002. “Base isolation and supplemental damping systems for seismic protection of wood structures: Literature review.” Earthquake Spectra 18 (3): 549–572. https://doi.org/10.1193/1.1503342.
Wada A., Iwata M., Huang Y. H. 1997. Seismic design trend of tall steel buildings after the Kobe Earthquake. In Proc., Int. Post-SMiRT Conf. on Seismic Isolation, Passive Energy Dissipation and Active Control of Vibrations of Structures, 251–269. Bologna, Italy: GLIS.
Wrzesniak, D., G. W. Rodgers, M. Fragiacomo, and J. G. Chase. 2016. “Experimental testing of damage-resistant rocking glulam walls with lead extrusion dampers.” Constr. Build. Mater. 102 (Pt 2):1145–1153. https://doi.org/10.1016/j.conbuildmat.2015.09.011.
Xu, J., and J. D. Dolan. 2009. “Development of nailed wood joint element in ABAQUS.” J. Struct. Eng. 135 (8): 968–976. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000030.
Information & Authors
Information
Published In
Copyright
© 2019 American Society of Civil Engineers.
History
Received: Feb 9, 2018
Accepted: Oct 16, 2018
Published online: Jan 29, 2019
Published in print: Jun 1, 2019
Discussion open until: Jun 29, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.