Abstract
This paper reviews current design standards and test methods for blast-resistant glazing design and compares a typical design outcome with that from comprehensive finite-element (FE) analysis. Design standards are conservative and are limited to the design of relatively small glazed panels. Standard test methods are expensive, create environmental pollution, and can classify the hazard ratings of only smaller glazed panels. Here the design of a laminated glass (LG) panel is carried out according to an existing design standard, and then its performance is examined using comprehensive FE modeling and analysis. Finite-element results indicate that both glass panes crack, the interlayer yields with little damage, and the sealant joints do not fail for the designed blast load. This failure pattern satisfies some of the requirements for minimal hazard rating in the design standard. It is evident that interlayer thickness and material properties are important during the post-crack stage of an LG panel, but they are not accounted for in the design standards. The new information generated in this paper will contribute toward an enhanced blast design of LG panels.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASTM. (2009). “Standard practice for determining load resistance of glass in buildings.” E 1300-09a, West Conshohocken, PA.
ASTM. (2010a). “Standard practice for specifying an equivalent 3-second duration design loading for blast resistant glazing fabricated with laminated glass.” 2248-09 AF, West Conshohocken, PA.
ASTM. (2010b). “Standard test method for glazing and window systems subject to air blast loadings.” 1642-04, West Conshohocken, PA.
Chung, J. H., Consolazio, G. R., Dinan, R. J., and Rinehart, S. A. (2010). “Finite-element analysis of fluid-structure interaction in a blast-resistant window system.” J. Struct. Eng., 297–306.
Cronin, D. S., Bui, K., Kaufmann, C., McIntosh, G., and Berstad T. (2003). “Implementation and validation of the Johnson-Holmquist ceramic material model in LS-DYNA.” 4th European LS-DYNA Users Conf., Dynamore, Ulm, Germany.
Dept. of Defense (DoD). (2008). “Structures to resist the effect of accidental explosions.” UFC 3-340-02, Washington, DC.
Dept. of Defense (DoD). (2013). “Unified Facilities Criteria DOD minimum antiterrorism standards for buildings.” UFC 4-010-01, Washington, DC.
Hallquist, J. O. (2006). LS-DYNA version 970 theory manual, Livermore Software Technology Corporation, Livermore, CA.
Hidallana-Gamage, H. D., Thambiratnam, D. P., and Perera, N. J. (2013a). “Computational analysis of laminated glass panels under blast loads: A comparison of two dimensional and three dimensional modeling approaches.” Int. J. Eng. Sci., 2(8), 69–79.
Hidallana-Gamage, H. D., Thambiratnam, D. P., and Perera, N. J. (2013b). “Failure analysis of laminated glass panels subjected to blast loads.” Eng. Failure Anal., 36, 14–29.
Holmquist, T. J., Johnson, G. R., Lopatin, C., Grady, D. E., and Hertel, E. S. Jr. (1995). High strain rate properties and constitutive modeling of glass, Sandia National Labs, Albuquerque, NM.
Hooper, P. A., Sukhram, R. A. M., Blackman, B. R. K., and Dear, J. P. (2012). “On the blast resistance of laminated glass.” Int. J. Solids Struct., 49(6), 899–918.
ISO 48. (1994). Rubber, vulcanized or thermoplastic: Determination of hardness (hardness between 10 IRHD and 100 IRHD), Geneva.
ISO 16933. (2007a). Glass in building—Explosion-resistant security glazing—Test and classification for arena air-blast loading, Geneva.
ISO 16934. (2007b). Glass in building—Explosion resistant security glazing—Test and classification by shock tube loading, Geneva.
Johnson, G. R., and Holmquist, T. J. (1993). “An improved computational constitutive model for brittle materials.” AIP Conf. Proc., High-Pressure Science and Technology, American Institute of Physics, Colorado Springs, CO, 981–984.
Larcher, M., Solomos, G., Casadei, F., and Gebbeken, N. (2012). “Experimental and numerical investigations of laminated glass subjected to blast loading.” Int. J. Impact Eng., 39(1), 42–50.
Ledbetter, S. R., Walker, A. R., and Keiller, A. P. (2006). “Structural use of glass.” J. Archit. Eng., 137–149.
Netherton, M. D., and Stewart M. G. (2009). “The effects of explosive blast load variability on safety hazard and damage risks for monolithic window glazing.” Int. J. Impact Eng., 36(12), 1346–1354.
Norville, H., and Conrath, E. (2001). “Considerations for blast-resistant glazing design.” J. Archit. Eng., 80–86.
Norville, H. S., and Conrath, E. J. (2006). “Blast-resistant glazing design.” J. Archit. Eng., 129–136.
Protective Design Center. (2012). “Blast resistant design methodology for window systems designed statically and dynamically.” PDC-TR 10-02, U.S. Army Corps of Engineers, Omaha, NE.
Seica, M. V., Krynski, M., Walker, M., and Packer, J. A. (2011). “Analysis of dynamic response of architectural glazing subject to blast loading.” J. Archit. Eng., 59–74.
Smith, D. (2001). “Glazing for injury alleviation under blast loading–United Kingdom practice.” Proc., 7th Int. Glass Conf. Glass Processing Days, Tampere, Finland, 335–340.
Teich, M., Warnstedt, P., and Gebbeken, N. (2011). “The influence of negative phase loading on cable net facade response.” J. Archit. Eng., 276–284.
U.K. Glazing Hazard Guide. (1997). “Glazing hazard guide, cubicle stand-offs, tables and charts.” SSG/EP/4/97, SAFE/SSG, Explosive Protection, London.
Weggel, D. C., and Zapata, B. J. (2008). “Laminated glass curtain walls and laminated glass lites subjected to low-level blast loading.” J. Struct. Eng., 466–477.
Weggel, D. C., Zapata, B. J., and Kiefer M. J. (2007). “Properties and dynamic behavior of glass curtain walls with split screw spline mullions.” J. Struct. Eng., 1415–1425.
Wei, J., and Dharani, L. R. (2006a). “Response of laminated architectural glazing subjected to blast loading.” Int. J. Impact Eng., 32(12), 2032–2047.
Wei, J., Shetty, M. S., and Dharani, L. R. (2006b). “Stress characteristics of a laminated architectural glazing subjected to blast loading.” Comput. Struct., 84(10–11), 699–707.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Feb 13, 2014
Accepted: Aug 8, 2014
Published online: Apr 2, 2015
Published in print: Sep 1, 2015
Discussion open until: Sep 2, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.