Influence of Negative Phase Loading on Cable Net Facade Response
Publication: Journal of Architectural Engineering
Volume 18, Issue 4
Abstract
The behavior of cable net facades subjected to blast loads differs significantly from the behavior of stiffer structures, such as post-and-rail facades or classical concrete or steel structures. The low eigenfrequencies and the relatively small specific weight of cable net facades cause larger deformations and higher structural velocities. The negative pressure phase of a blast load can especially have a significant effect on the structural response. The negative phase can either increase or decrease the deflections. Nevertheless, the United States and international threat levels according to the United States General Services Administration and the ISO neglect the negative phase of blast loads. In the present investigation, a comparison and assessment was done to present the differences between the standard blast load model, that is, a triangular-shaped blast load neglecting the negative phase, and the exponentially decaying Friedlander blast load model, which takes the negative phase into account. Then, the implications for the structural response are analyzed, and conclusions for the protective design of cable net facades are presented.
Get full access to this article
View all available purchase options and get full access to this article.
References
ANSYS, Inc. (2009). ANSYS theory reference of mechanical APDL and mechanical applications. ANSYS, Inc., Canonsburg, PA.
Bogosian, D., Ferritto, J., and Shi, Y. (2002). “Measuring uncertainty and conservatism in simplified blast models.” Proc., 30th DoD Explosives Safety Seminar, Department of Defense, Arlington, VA, 1–26.
Borgers, J., and Vantomme, J. (2008). “Improving the accuracy of blast parameters using a new Friedlander curvature.” Proc., 30th DoD Explosives Safety Seminar, Department of Defense, Arlington, VA, 1–11.
Bulson, P. (1997). Explosive loading of engineering structures. A history of research and a review of recent developments, Spon Press, London.
Defense Special Weapons Agency. (1997). “Design and analysis of hardened structures to conventional weapons effects.” Rep. TM 5-855-1, Defense Special Weapons Agency and the Departments of the Army, Air Force, and Navy, Alexandria, VA.
Department of Defense (DoD). (2008). “Structures to resist the effects of accidental Explosions.” Rep. UFC 3-340-02, U.S. Department of Defense. Arlington, VA.
Feng, R.-q., Wu, Y., and Shen, S.-z. (2007). “Working mechanism of single-layer cable net supported glass curtain walls.” Adv. Struct. Eng., 10(2), 183–195.
Feng, R.-q., Zhang, L.-l., Wu, Y., and Shen, S.-z. (2009). “Dynamic performance of cable net facades.” J. Construct. Steel Res., 65(12), 2217–2227.
Flanagan, D. P., and Belytschko, T. (1981). “A uniform strain hexahedron and quadrilateral with orthogonal hourglass control.” Int. J. Numer. Methods Eng., 17(5), 679–706.
Friedlander, F. G. (1939). Note on the diffraction of blast waves by a wall. U.K. Home Office Dept., London, U.K.
General Services Administration (GSA). (2001). Security design criteria. General Services Administration, Interagency Security Committee. Washington, DC.
ISO. (2007). “Glass in building—Explosion-resistant security glazing—Test and classification for arena air-blast loading.” ISO 16933. Geneva.
Johnson, N. F. (2006). “International standards for blast resistant glazing.” J. ASTM Int., 3(4), 1–16.
Kingery, N. C., and Bulmash, G. (1984). “Airblast parameters from TNT spherical air burst and hemispherical surface burst.” Technical Rep. ARBRL-TR-02555, U.S. Army Armament Research and Development Center, Ballistic Research Laboratory, Aberdeen Proving Ground, Aberdeen, MD.
Kinney, G. F., and Graham, K. J. (1985). Explosive shocks in air, Springer, New York.
Krauthammer, T., and Altenberg, A. (2000). “Negative phase blast effects on glass panels.” Int. J. Impact Eng., 24(1), 1–17.
Rickman, D. D., and Murrell, D. W. (2007). “Development of an improved methodology for predicting airblast pressure relief on a directly loaded wall.” J. Press. Vess. Technol., 129(1), 195–204.
Rose, T. A., Smith, P. D., and May, J. H. (2006). “The interaction of oblique blast waves with buildings.” Shock Waves, 16(1), 35–44.
Ruoqiang, F., Yue, W., and Shizhao, S. (2006). “A simplified calculating method of nonlinear frequency of cable net under mean wind load.” Acta Mech. Solid. Sinica, 19(3), 248–254.
Schlaich, J., Schober, H., and Moschner, T. (2005). “Prestressed cable-net facades.” Struct. Eng. Int., 15(1), 36–39.
Schober, H., and Schneider, J. (2004). “Developments in structural glass and glass structures.” Struct. Eng. Int., 14(2), 84–87.
Shi, Y., Wu, L., Wang, Y., Luo, K., and Xu, Y. (2007). “FEM analysis and experimental study on monolayer cable net for glass facades: Dynamic properties.” Adv. Struct. Eng., 10(4), 383–395.
Teich, M., and Gebbeken, N. (2010). “The influence of the underpressure phase on the dynamic response of structures subjected to blast loads.” Int. J. Protect. Struct., 1(2), 219–233.
Warnstedt, P. (2009). “Tragverhalten von seilnetzfassaden unter explosionsbelastungen.” Diploma thesis, Univ. of the German Armed Forces, Munich Campus, Neubiberg, Germany.
Wei, J., and Dharani, L. R. (2006). “Response of laminated architectural glazing subjected to blast loading.” Int. J. Impact Eng., 32(12), 2032–2047.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Aug 16, 2010
Accepted: Dec 12, 2011
Published online: Dec 14, 2011
Published in print: Dec 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.