Visualization of Crushing Evolution in Granular Materials under Compression Using DEM
Publication: International Journal of Geomechanics
Volume 6, Issue 3
Abstract
Granular materials forming part of natural slopes, embankments, subgrades of foundations, and pavement structures are subjected to both static and dynamic loads during their engineering lives. As a result of these loads, particle crushing may occur. The present study demonstrates that the discrete-element method (DEM) can be used to visualize the evolution of this breakage process. In particular, the evolution of crushing in a simulated granular material subjected to uniaxial compression is presented. Even though DEM does not normally consider particle breakage, it is possible to simulate crushing by replacing one particle that has failed in tension with a combination of many particles of different sizes. The results from the simulation indicate that crushing does not develop uniformly throughout the sample, but rather concentrates in certain regions. These observations agree with experimental results of uniaxial tests conducted on sand. Other results from the simulation satisfactorily agree with experimental results previously reported by other researchers. In this way, by using a simplified failure criterion, DEM can be used to visualize and understand the evolution of granular crushing. This is something that is very difficult to do with laboratory tests alone.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgment
The work described herein was supported by Grant No. NSFCMS-0301815 to the University of Pittsburgh from the National Science Foundation, Washington, D.C. This support is gratefully acknowledged.
References
Billam, J. (1971). “Some aspects of the behavior of granular materials at high pressures.” Stress–Strain Behavior of Soils: Proc., Roscoe Memorial Symp., Cambridge Univ., Cambridge, U.K., 69–80.
Bishop, A. W. (1966). “The strength of soils as engineering materials.” Geotechnique, 16, 89–130.
Bolton, M. D., and McDowell, G. R. (1997). “Clastic mechanics.” Proc., IUTAM Symp. on Mechanics of Granular and Porous Materials,35–46.
Cheng, Y. P., Nakata, Y., and Bolton, M. D. (2003). “Discrete element simulation of crushable soil.” Geotechnique, 53(7), 633–641.
Cundall, P. A., and Strack, O. D. L. (1979). “A discrete numerical model for granular assemblies.” Geotechnique, 29(1), 47–65.
Feda, J. (2002). “Notes on the effect of grain crushing on the granular soil behavior.” Eng. Geol. (Amsterdam), 63, 93–98.
Hagerty, M. M., Hite, D. R., Ulrich, C. R., and Hagerty, D. J. (1993). “One-dimensional high pressure compression of granular media.” J. Geotech. Eng., 119(1), 1–18.
Hardin, B. O. (1985). “Crushing of soil particles.” J. Geotech. Eng., 111(10), 1177–1192.
Itasca Consulting Group, Inc. (2002a). (Particle flow code in two dimensions) version 3.0: FISH in PFC.
Itasca Consulting Group, Inc. (2002b). (Particle flow code in two dimensions) version 3.0: Theory and background, Sections 1 and 2.
Jensen, R. P., Plesha, M. E., Edil, T. B., Bosscher, P. J., and Kahla, N. B. (2001). “DEM simulation of particle damage in granular media—Structure interfaces.” Int. J. Geomech., 1(1), 21–40.
Lade, P. V., Yamamuro, J. A., and Bopp, P. A. (1996). “Significance of particle crushing in granular materials.” J. Geotech. Eng., 122(4), 309–316.
Lang, R. A. (2002). “Numerical simulation of comminution in granular materials with an application to fault gouge evolution.” MSc thesis, Texas A&M Univ., College Station, Tex., 1–62.
Lee, K. L., and Farhoomand, I. (1967). “Compressibility and crushing of granular soil in anisotropic triaxial compression.” Can. Geotech. J., 4(1), 68–86.
Leung, C. F., Lee, F. H., and Yet, N. S. (1996). “The role of particle breakage in pile creep in sand.” Can. Geotech. J., 33, 888–898.
McDowell, G. R., and Bolton, M. D. (1998). “On the micromechanics of crushable aggregates.” Geotechnique, 48(5), 667–679.
McDowell, G. R., and Harireche, O. (2002). “Discrete-element modeling of yielding and normal compression of sand.” Geotechnique, 52(4), 299–304.
McDowell, G. R., and Khan, J. J. (2003). “Creep of granular materials.” Granular Matter, 5, 115–120.
Nakata, Y., Hyodo, M., Hyde, A. F. L., Kato, Y., and Murata, H. (2001a). “Microscopic particle crushing of sand subjected to high pressure one-dimensional compression.” Soils Found., 41(1), 69–82.
Nakata, Y., Kato, Y., Hyodo, M., Hyde, A. F. L., and Murata, H. (2001b). “One-dimensional compression behavior of uniformly graded sand related to single particle crushing strength.” Soils Found., 41(2), 39–51.
Takei, M., Kusakabe, O., and Hayashi, T. (2001). “Time-dependent behavior of crushable materials in one-dimensional compression tests.” Soils Found., 41(1), 97–121.
Terzaghi, C., and Peck, R. (1948). Soil mechanics in engineering practice, Wiley, New York, 56–61.
Tsoungui, O., Vallet, D., and Charmet, J. C. (1999). “Numerical model of crushing of grains inside two-dimensional granular materials.” Powder Technol., 105, 190–198.
Turcotte, D. L. (1986). “Fractals and fragmentation.” J. Geophys. Res., 91(B2), 1921–1926.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Jul 22, 2004
Accepted: Mar 18, 2005
Published online: May 1, 2006
Published in print: May 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.