Thermomechanical Framework for the Constitutive Modeling of Asphalt Concrete
Publication: International Journal of Geomechanics
Volume 6, Issue 1
Abstract
This study is concerned with the constitutive modeling of asphalt concrete. Unlike most constitutive models for asphalt concrete that do not take into account the evolution of the microstructure of the material, this study incorporates the evolution of the microstructure by using a framework that recognizes that a body’s natural configurations can evolve as the microstructure changes. The general framework, on which this study is based, is cast within a full thermomechanical setting. In this paper, we develop models within the context of a mechanical framework that stems from the general framework for models based on the full thermodynamic framework and the resulting equations represent a nonlinear rate type viscoelastic model. The creep and stress relaxation experiments of Monismith and Secor are used for validating the efficacy of the model, and it is found that the predictions of the theory agree very well with the available experimental results. The advantages of using such a framework are many, especially when one wants to model the diverse mechanical and thermodynamic response characteristics of asphalt and asphalt concrete.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgment
K.R.R. and J.M.K. thank the National Science Foundation for its support.NSF
References
Bolk, H. J. N. A. (1981). “The creep test.” SCW Record 5, Study Center for Road Construction, The Netherlands.
Braz, D., Lopes, R. T., and Motta, L. M. G. (1999a). “Analysis of the percentage voids test and field specimen using computerized tomography.” Nucl. Instrum. Methods Phys. Res. A, 422, 942–948.
Braz, D., Motta, L. M. G., and Lopes, R. T. (1999b). “Computed tomography in the fatigue test analysis of an asphaltic mixture.” Appl. Radiat. Isot., 50, 661–671.
Daniel, J. S., and Kim, Y. R. (2001). “Laboratory evaluation of fatigue damage and healing of asphalt mixtures.” J. Mater. Civ. Eng., 13(6), 434–440.
Davis, E. F., Krokosky, E. M., and Tons, E. (1963). “Stress relaxation of bituminous concrete in tension.” Rep. No. R 63-40, School of Engineering, Massachusetts Institute of Technology, Cambridge, Mass.
Desai, C. S. (1998). “Review and evaluation of models for pavement materials.” Rep. to SUPERPAVE.
Desai, C. S. (2002). “Mechanistic pavement analysis and design using unified material and computer models.” Proc., Int. Symp. on 3D Finite Element for Pavement Analysis, Design and Research, Amsterdam, The Netherlands.
Dijk, W. V. (1975). “Practical fatigue characterization of bituminous mixes.” Proc. Association of Asphalt Paving Technologists, 44, 38–74.
Dijk, W. V., and Visser, W. (1977). “The energy approach to fatigue for pavement design.” Proc., Association of Asphalt Paving Technologists, 46, 1–40.
Eckart, C. (1948). “The thermodynamics of irreversible processes: IV. The theory of elasticity and anelasticity.” Phys. Rev., 73, 373–382.
Gear, C. W. (1971). Numerical initial value problems in ordinary differential equations, Prentice–Hall, Englewood Cliffs, N.J.
Gibson, N. H., Schwartz, C. W., Schapery, R. A., and Witczak, M. W. (2003). “Confining pressure effect of viscoelasticity, viscoplasticity and damage in asphalt concrete.” Proc., 16th Engineering Conf., American Society of Civil Engineers, Seattle.
Ha, K., and Schapery, R. A. (1998). “A three-dimensional viscoelastic constitutive model for particulate composites with growing damage and its experimental validation.” Int. J. Solids Struct., 35, 3497–3517.
Huang, Y. (1967). “Deformation and volume change characteristics of a sand asphalt mixture under constant direct and triaxial compressive stresses.” Highw. Res. Rec., 178, 60–74.
Humphrey, J. D., and Rajagopal, K. R. (2002). “A constrained mixture model for growth and remodeling of soft tissues.” Math. Models Meth. Appl. Sci., 12, 1–24.
Huschek, S. (1985). “The deformation behavior of asphalt concrete under triaxial compression.” Proc. Association of the Asphalt Paving Technologists, 54, 407–431.
Kim, Y., and Little, D. N. (1990). “One-dimensional constitutive modeling of asphalt concrete.” J. Eng. Mech., 116(4), 751–772.
Knowles, J. K. (1977). “The finite anti-plane shear field near the tip of a crack for a class of incompressible elastic solids.” Int. J. Fract., 13, 611–639.
Lee, A. R., and Markwick, A. H. D. (1937). “The mechanical properties of bituminous surfacing materials under constant stress.” J. Soc. Chem. Ind., London, 56, 146T–156T.
Lee, H. J., Daniel, J. S., and Kim, Y. R. (2000). “Continuum damage mechanics-based fatigue model of asphalt concrete.” J. Mater. Civ. Eng., 12(2), 105–112.
Masad, E., and Button, J. W. (2000). “Unified imaging approach for measuring aggregate angularity and texture.” Comput. Aided Civ. Infrastruct. Eng., 15, 272–280.
Masad, E., Muhunthan, B., Shashidar, N., and Harman, T. (1999). “Internal structure characterization of asphalt concrete using image analysis.” J. Comput. Civ. Eng., 13(2), 88–95.
Moavenzadeh, F., and Soussou, J. (1968). “Viscoelastic constitutive equation for sand-asphalt mixture.” Highw. Res. Rec., 256, 36–52.
Monismith, C. L., and Secor, K. E. (1962). “Viscoelastic behavior of asphalt concrete pavements.” Report Prepared for Institute of Transportation and Traffic Engineering, Univ. of California, Berkeley, Calif.
Murali Krishnan, J., and Lakshmana Rao, C. (2000). “Air voids reduction of asphalt concrete using mixture theory.” Int. J. Eng. Sci., 38, 1331–1354.
Murali Krishnan, J., and Rajagopal, K. R. (2003). “Review of the uses and modeling of bitumen from ancient to modern times.” Appl. Mech. Rev., 56(2), 149–214.
Murali Krishnan, J., and Rajagopal, K. R. (2004). “Thermodynamic framework for constitutive modeling of asphalt concrete—Theory and applications.” J. Mater. Civ. Eng., 16(2), 155–166.
Nijboer, L. (1948). Plasticity as a factor in the design of dense bituminous road carpets, Elsevier, Amsterdam.
Oldroyd, J. G. (1950). “On the formulation of rheological equations of state.” Proc. R. Soc. London, Ser. A, 200, 523–541.
Pagen, C. (1965). “Rheological response of bituminous concrete.” Highw. Res. Rec., 67, 1–26.
Perl, M., Uzan, J., and Sides, A. (1983). “Visco-elastic-plastic constitutive law for a bituminous mixture under repeated loading.” Transportation Research Record 911, Transportation Research Board, Washington, D.C., 20–27.
Press, W. H., Teukolsky, S. A., Vetterling, W. T., and Flannery, B. P. (1992). Numerical recipes in C, 2nd Ed., Cambridge University Press, New York.
Rajagopal, K. R. (1995). “Multiple configurations in continuum mechanics.” Rep. Volume 6, Institute for Computational and Applied Mechanics, Univ. of Pittsburgh, Pittsburgh.
Rajagopal, K. R., and Srinivasa, A. R. (1995). “Inelastic behavior of materials—Part II: Energetics associated with discontinous deformation twinning.” Int. J. Plast., 13, 1–35.
Rajagopal, K. R., and Srinivasa, A. R. (1998a). “Mechanics of the inelastic behavior of materials—Part II: Inelastic response.” Int. J. Plast., 14, 969–995.
Rajagopal, K. R., and Srinivasa, A. R. (1998b). “Mechanics of the inelastic behavior of materials—Part I: Theoretical underpinnings.” Int. J. Plast., 14, 945–967.
Rajagopal, K. R., and Srinivasa, A. R. (1999). “On the thermodynamics of shape memory wires.” ZAMP, 50, 459–496.
Rajagopal, K. R., and Srinivasa, A. R. (2000). “A thermodynamic framework for rate type fluid models.” J. Non-Newtonian Fluid Mech., 88, 207–227.
Rajagopal, K. R., and Wineman, A. S. (1992). “A constitutive equation for nonlinear solids which undergo deformation induced microstructural changes.” Int. J. Plast., 8, 385–395.
Rao, I. J., Humphrey, J. D., and Rajagopal, K. R. (2003). “Growth and remodeling in a dynamically loaded uniaxial tissue.” Comput. Methods Eng. Sci., in press.
Rao, I. J., and Rajagopal, K. R. (2000). “Phenomenological modeling of polymer crystallization using the notion of multiple natural configurations.” Interfaces Free Boundaries, 2, 73–94.
Rao, I. J., and Rajagopal, K. R. (2001). “A study of strain-induced crystallization of polymers.” Int. J. Solids Struct., 38, 1149–1167.
Rao, I. J., and Rajagopal, K. R. (2002). “A thermodynamic framework for the study of crystallization in polymers.” ZAMP, 53, 365–406.
Reiner, M. (1960). Deformation, strain and flow—An elementary introduction, H. K. Lewis & Co., London.
Romero, P., and Masad, E. (2001). “Relationship between the representative volume element and mechanical properties of asphalt concrete.” J. Mater. Civ. Eng., 13(1), 77–84.
Saal, R. N. J. (1950). “Physical properties of asphaltic bitumen: Rheological properties.” The properties of asphaltic bitumen, J. P. Pfeiffer, ed., Elsevier, Amsterdam, The Netherlands 49–76.
Scarpas, A., Gurp, C. A. P. M., Al-Khonry, R., and Erkens, S. M. J. G. (1997). “Finite element simulation of damage development in asphalt concrete pavement.” Proc., 8th Int. Conf. on Asphalt Pavements, Univ. of Washington, Seattle, 673–692.
Schapery, R. A. (1984). “Correspondence principles and a generalized J integral for large deformation and fracture analysis of viscoelastic media.” Int. J. Fract., 25, 195–223.
Van der Poel, C. (1954). “A general system describing the visco-elastic properties of bitumens and its relation to routine test data.” J. Appl. Chem., 4, 221–236.
Zhou, Z., Synolakis, C. E., Leahy, R. M., and Song, S. M. (1995). “Calculation of 3D internal displacement fields from 3D X-ray computer tomographic images.” Proc. R. Soc. London, Ser. A, 449, 537–554.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Jan 13, 2004
Accepted: Feb 22, 2005
Published online: Jan 1, 2006
Published in print: Jan 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.