Genetic Algorithms for the Calibration of Constitutive Models for Soils
Publication: International Journal of Geomechanics
Volume 5, Issue 3
Abstract
This paper presents a study that uses an innovative numerical method called the “genetic algorithm” for material parameter optimization in constitutive modeling. The paper introduces a new scheme, a fitness function, to estimate the error of predicted behavior due to a given set of material parameters. Optimization efficiency of the proposed fitness function is analyzed by changing the selected genetic algorithm parameters. The genetic algorithm and the new fitness function were found to be capable of optimizing material parameters of complex constitutive models.
Get full access to this article
View all available purchase options and get full access to this article.
References
Adeli, H., and Cheng, N. T. (1993). “Integrated genetic algorithm for optimization of structures.” J. Aerosp. Eng., 6(4), 315–328.
Adeli, H., and Cheng, N. T. (1994). “Concurrent genetic algorithm for optimization of large structures.” J. Aerosp. Eng., 7, 276–296.
Chakroborty, P., Deb, K., and Subrahmanyam, P. S. (1995). “Optimal scheduling of urban transit system using genetic algorithms.” J. Transp. Eng., 121(6), 544–553.
Chan, W. T., Fwa, T. F., and Tan, C. Y. (1994). “Road-maintenance planning using genetic algorithms. I: Formulation.” J. Transp. Eng., 120(5), 693–709.
De Jong, K. A. (1975). “An analysis of the behavior of a class of genetic adaptive system.” PhD thesis, Univ. of Michigan, Ann Arbor.
Desai, C. S. (1974). “A consistent finite element technique for work-softening behavior.” Proc., Int. Conf., on Computational Methods in Nonlinear Mechanics, J. T. Oden et al., eds, Univ. of Texas at Austin.
Desai, C. S. (1976). “Finite element residual schemes for unconfined flow.” Int. J. Numer. Methods Eng., 10, 1415.
Desai, C. S. (1980). “A general basis for yield, failure, and potential functions in plasticity.” Int. J. Numer. Analyt. Meth. Geomech., 4, 361–375.
Desai, C. S. (1987). “Further on unified hierarchical models based on alternative correction or damage approach.” Internal Research Rep., Dept. of Civil Engineering and Engineering Mechanics, Univ. of Arizona, Tucson, Ariz.
Desai, C. S. (1992) “The disturbed state as a phase transformation through self-adjustment concept for modeling of mechanical response of materials and interfaces.” Rep., Dept., of Civil Engineering and Engineering Mechanics, The Univ. of Arizona, Tucson, Ariz.
Desai, C. S. (2001). Mechanics of materials and interfaces: The disturbed state concept, CRC, Boca Raton, Fla.
Desai, C. S., and Ma, Y. (1992). “Modeling of joints and interfaces using the disturbed state concept.” Int. J. Numer. Analyt. Meth. Geomech., 16, 623–653.
Desai, C. S., Galagoda, H. M., and Wathugala, G. W. (1987). “Hierarchical modeling for geologic materials and discontinuities-joints and interfaces.” Proc., of 2nd Int. Conf. on Constitutive Laws for Engineering Materials: Theory and Applications, C. S. Desai et al., eds, Elsevier, New York, Vol. 1, 81–95.
Desai, C. S., Somasundaram, S., and Frantziskonis, G. (1986). “A hierarchical approach for constitutive modeling of geologic materials.” Int. J. Numer. Analyt. Meth. Geomech., 10, 225–257.
Duncan, J. M., Byrne, P., Wong, K. S., and Mabry, P. (1980). “Strength, stress–strain and bulk modulus parameters for finite element analyses of stresses and movements in soil masses.” Rep. No. UCB/GT/80-01, Dept. of Civil Engineering, Univ. of California, Berkeley.
Duncan, J. M., and Chang, C. Y. (1970). “Nonlinear analysis of stress and strain in soils.” J. Soil Mech. Found. Div., 96, SM5.
Eshelman, L. J., and Schaffer, J. D. (1993). “Real-coded genetic algorithms and interval-schemata.” Foundations of Genetic Algorithms II, D. Whitley ed., Morgan Kaufmann, San Mateo, Calif. 187–202.
Frantziskonis, G. N., and Desai, C. S. (1987). “Constitutive model with strain softening.” Int. J. Solids Struct., 23(6), 751–767.
Fwa, T. F., Tan, C. Y., and Chan, W. T. (1994). “Road-maintenance planning using genetic algorithms. II: Analysis.” J. Transp. Eng., 120(5), 710–722.
Goldberg, D. E. (1989a). “Genetic algorithms in search, optimization, and machine learning.” Addison-Wesley, Reading, Mass.
Goldberg, D. E., (1989b). “Sizing population for serial and parallel genetic algorithms.” Proc., 3rd Int. Conf. on Genetic Algorithms, J. D. Schaffer, ed., Morgan Kaufmann, San Mateo, Calif.
Hajela, P., and Lee, E. (1995). “Genetic algorithm in truss topological optimization.” Int. J. Solids Struct., 32, 3341–3357.
Kachanov, L. M. (1958). The theory of creep, (English translation) A. J. Kennedy, ed., Ch. IX, X, National Lending Library, Boston.
Katti, D. R., and Desai, C. S. (1995). “Modeling and testing of cohesive soil using disturbed-state concept.” J. Eng. Mech., 121(5), 648–658.
Koumousis, V. K., and Georgio, P. G. (1994). “Genetic algorithms in discrete optimization of steel truss roofs.” J. Comput. Civ. Eng., 8(3), 309–325.
Krajcinovic, D., and Fonseka, G. U. (1981). “The continuous damage theory for brittle materials; Parts I and II.” J. Appl. Mech., 48 809–824.
Lee, K. L. (1965). “Triaxial compressive strength of saturated sands under seismic loading conditions.” PhD dissertation, Univ. of California at Berkeley.
Macari-Pasqualino, E. J., Runesson, K., and Sture, S. (1991). “Analysis of low effective stress characteristics of granular materials in reduced gravity.” ASCE Geotechnical Engineering Congress, Reston, Va, Vol. II, 1222–1233.
Mitchell, M. (1996). An introduction to genetic algorithms, The MIT Press, Cambridge, Mass.
Pal, S. (1997). “Numerical simulation of geosynthetic reinforced earth structure using finite element methods.” PhD dissertation, Louisiana State Univ., Baton Rouge, La.
Pal, S., and Wathugala, G. W. (1997). “DSC constitutive model for sand-geosynthetic interfaces.” Computer Methods and Advances in Geomechanics: Proc., 9th Int. Conf. of the Int. Association for Computer Methods and Advances in Geomechanics, J. Yuan, ed., Vol. 2. Balkema, Rotterdam, The Netherlands, 875–880.
Pal, S., and Wathugala, G. W. (1999). “Disturbed state model for sand-geosynthetic interfaces and application to pull-out tests.” Int. J. Numer. Analyt. Meth. Geomech., 23, 1873–1892.
Pal, S., Wathugala, G. W., and Kundu, S. (1996). “Calibration of a constitutive model using genetic algorithm.” Comput. Geotech., 19(4), 325–348.
Roscoe, K. H., Schofield, A., and Thurairajah, A. (1963). “Yielding of clays in state wetter than critical.” Geotechnique, 13(3), 211–240.
Samarajiva, P. M. (2000). “Constitutive modeling of cohesionless granular materials using disturbed state concept.” PhD dissertation, Dept. of Civil and Environmental Engineering, Louisiana State Univ., Baton Rouge, La.
Schaffer, J. D., Caruna, R. A., Eshelman, L. J., and Das, R. (1989). “A study of control parameters affecting on-line performance of genetic algorithm for function optimization.” Proc. 3rd Int. Conf. on Genetic Algorithms, J. D. Schaffer, ed., Morgan Kaufmann, San Mateo, Calif.
Simpson, A. R., and Priest, S. D. (1993). “The application of genetic algorithms to optimization problems in geotechnics.” Comput. Geotech., 15, 1–19.
Tesar, A., and Dresik, M. (1995). “Genetic algorithm for dynamic tuning of structures.” Comput. Speech Lang., 57, 287–295.
Wathugala, G. W. (1990). “Finite element dynamic analysis of nonlinear porous media with applications to piles in saturated clay.” PhD dissertation, Dept. of Civil Engineering and Engineering Mechanics, Univ. of Arizona, Tucson, Ariz.
Wathugala, G. W. (2000). “Chapter 10: Unified disturbed state concept and HiSS plasticity models.” invited chapter for Modelling in Geomechanics, Zaman, Booker, and Gioda, eds., Wiley, New York, 217–246, in press.
Wathugala, G. W., and Desai, C. S. (1987). “Constitutive model for soils with strain softening and shear dilation.” Internal Research Rep., Dept. of Civil Engineering and Engineering Mechanics, Univ. of Arizona, Tucson, Ariz.
Wathugala, G. W., and Desai, C. S. (1989). “Damage-based constitutive model for soils.” Proc., 12th Canadian Congress of Applied Mechanics (CANCAM’89), 530–531.
Wathugula, W., and Desai, C. S. (1993). “Constitutive model for cyclic behavior of clays. I: Theory.” J. Geotech. Eng., 119(4), 714–729.
Wright, A. H. (1991). “Genetic algorithm for real parameter optimization.” Foundations of genetic algorithms, G. J. E. Rawlins, ed., Morgan Kaufmann, San Mateo, Calif., 205–218.
Wu, S., and Chow, P. (1995). “Steady-state genetic algorithms for discrete optimization of trusses.” Comput. Struct., 56, 979–991.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Jan 21, 2003
Accepted: Jun 11, 2004
Published online: Sep 1, 2005
Published in print: Sep 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.