Ductility of Reinforced Concrete Members Externally Wrapped with Fiber-Reinforced Polymer Sheets
Publication: Journal of Composites for Construction
Volume 11, Issue 3
Abstract
The effectiveness of external wrapping with fiber-reinforced polymer for enhancing the curvature ductility of lightly reinforced concrete members is investigated. Referring to members with circular transverse cross sections, the performances in terms of both strength and ductility capacities are analyzed, and the predictive reliability of two different recent constitutive models, available in the literature and able to take into account the softening behavior of confined concrete, is checked. A parameter characterizing the effectiveness of the confining wrapping is proposed, and characteristic values are suggested. Moreover, referring to ductility increases due to confinement effects, a comparison is made between the predictions obtained using the constitutive models and simple expressions given in recent codes. Parametric analyses carried out highlight the importance of a definition of the limits of validity of expressions given in the literature for estimation of ductility increases in order to avoid nonconservative assessment.
Get full access to this article
View all available purchase options and get full access to this article.
References
ACI. (2002). Guide for the design and construction of externally bonded FRB system for strengthening concrete structures, ACI Committee 440, Farmington Hills, Mich.
Albanesi, T., Nuti, C., and Vanzi, I. (2004). “Explicit constitutive relationship for axially loaded concrete confined by FRP.” Proc., 13th WCEE.
ASTM. (1992). “Standard test method for apparent tensile strength of ring or tubular plastics and reinforced plastics by split disk method.” D 2290-92, West Conshohocken, Pa.
Berthet, J. F., Ferrier, E., and Hamelin, P. (2005). “Compressive behavior of concrete externally confined by composite jackets. Part A: Experimental study.” Constr. Build. Mater., 19(3), 223–232.
Bisby, L. A., Dent, A. J. S., and Green, M. F. (2005). “Comparison of confinement models for fiber-reinforced polymer-wrapped concrete.” ACI Struct. J., 102(1), 62–72.
CEB-FIP. (2001). “Bullettin 14. Externally bonded FRP reinforcement for RC structures.”
De Lorenzis, L., and Tepfers, R. (2003). “Comparative study of models on confinement of concrete cylinders with reinforced polymer composites.” J. Compos. Constr., 7(3), 219–237.
Fam, A. Z., and Rizkalla, S. H. (2001). “Confinement model for axially loaded concrete confined by circular fiber reinforced polymer tubes.” ACI Struct. J., 98(4), 451–461.
Harries, K., and Kharel, G. (2002). “Behaviour and modelling of concrete subjected to variable confining pressure.” ACI Mater. J., 99(2), 180–189.
La Tegola, A., and Manni, O. (1997). “Structural behaviour of concrete elements confined with FRP jackets.” Proc. ECMM Conf., 323–330.
Lam, L., and Teng, J. G. (2002). “Strength models for fiber-reinforced plastic-confined concrete.” J. Struct. Eng., 128(5), 612–623.
Lam, L., and Teng, J. G. (2003). “Design-oriented stress-strain model for FRP-confined concrete.” Constr. Build. Mater., 17(6–7), 471–489.
Lam, L., and Teng, J. G. (2004). “Ultimate condition of fiber reinforced polymer-confined concrete.” J. Compos. Constr., 8(6), 539–548.
Mander, J. B., Priestley, M. J. N., and Park, R. (1988). “Theoretical stress-strain model for confined concrete.” J. Struct. Eng., 114(8), 1804–1826.
Mirmiran, A., Shahawy, M., Samaan, M., El Echary, H., Mastrapa, J. C., and Pico, O. (1998). “Effect of column parameters on FRP-confined concrete.” J. Compos. Constr., 2(4), 175–185.
Moran D., A., and Pantelides, C. P. (2005). “Damage based stress–strain model for fiber-reinforced polymer-confined concrete.” ACI Struct. J., 102(1), 54–61.
Nanni, A., and Bradford, N. M. (1995). “FRP jacketed concrete under uniaxial compression.” Constr. Build. Mater., 9(2), 115–224.
Pantazopoulou, S. J., and Mills, R. H. (1995). “Microstructural aspects of the mechanical response of plain concrete.” ACI Mater. J., 92, 605–616.
Pessiki, S., Harries, K. A., Kestner, J. T., Sause, R., and Ricles, J. M. (2001). “Axial behavior of reinforced concrete columns confined with FRP jackets.” J. Compos. Constr., 5(4), 237–245.
Saiidi, M. S., Sureshkumar, K., and Pulido, C. (2005). “Simple carbon-fiber-reinforced-plastic-confined concrete model for moment-curvature analysis.” J. Compos. Constr., 9(1), 101–104.
Samaan, M., Mirmiran, A., and Shahawy, M. (1998). “Model of concrete confined by fiber composite.” J. Struct. Eng., 124(9), 1025–1031.
Seible, F., Burgueño, R., Abdallah, M. G., and Nuismer. (1995). “Advanced composite carbon shell systems for bridge columns under seismic loads.” Proc., Nat. Seismic Conf. on Bridges and Hwy., Progress in Res., and Pract.
Shahawy, M., Mirmiran, A., and Beitelman, T. (2000). “Tests and modeling of carbon-wrapped concrete columns.” Composites, Part B, 31, 471–480.
Shamim, A. S. and Grace, Y. (2002). “Seismic behavior of concrete columns confined with steel and fiber-reinforced polymers.” ACI Struct. J., 99(1), 72–80.
Spoelstra, M. R., and Monti, G. (1999). “FRP-confined concrete model.” J. Compos. Constr., 3(3), 143–150.
Xiao, Y., and Wu, H. (2000). “Compressive behavior of concrete confined by carbon fiber composite jackets.” J. Mater. Civ. Eng., 12(2), 139–146.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: May 18, 2005
Accepted: May 26, 2006
Published online: Jun 1, 2007
Published in print: Jun 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.