Adhesively Bonded and Translucent Glass Fiber Reinforced Polymer Sandwich Girders
Publication: Journal of Composites for Construction
Volume 8, Issue 5
Abstract
An experimental program has been carried out to investigate the structural behavior of adhesively bonded glass fiber reinforced polymer (GFRP) sandwich girders. The girders, conceivable for main spans up to 20 m, are composed of translucent double sandwich element webs and adhesively bonded pultruded shape flanges. The continuous adhesive connections between web and flanges are loaded in a highly favorable manner without peeling stresses. Despite the complex load-carrying and failure behavior of the girders, simple calculation models can be applied. The successful girder experiments allowed for the development of a material-adapted construction method for new GFRP bridges and buildings. The integration of architectural aspects such as transparency, translucency, lighting, and color, as well as building physical aspects for buildings such as thermal insulation, substantially increases the overall value of the proposed constructions. Together with the lower life-cycle costs, this further justifies these new materials’ higher initial costs as compared with traditional materials.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bank, L. C., and Yin, J. (1999). “Failure of web-flange junction in post-buckled pultruded I-beams.” J. Compos. Constr., 3(4), 177–184.
2.
Barbero, E. J., and Raftoyiannis, I. G. (1994). “Lateral and distorsional buckling of pultruded I-beams.” Compos. Struct., 27(3), 261–268.
3.
Harvey, W. J. (1993). “A reinforced Polymer footbridge, Aberfeldy, UK.” Struct. Eng. Int. (IABSE, Zurich, Switzerland), 3(4), 229–232.
4.
Hassan, N. K., Mohamedien, M. A., and Rizkalla, S. (1997). “Rational model for multibolted connections for GFRP members.” J. Compos. Constr., 1(2), 71–78.
5.
Hayes, M. D., Lesko, J. J., Haramis, J., Cousins, T. E., Gomez, J., and Masarelli, P. (2000). “Laboratory and field testing of composite bridge superstructure.” J. Compos. Constr., 4(3), 120–128.
6.
Head, P. (1996). “High performance structural materials –advanced composites.” Proc., IABSE Symp., Kopenhagen, Denmark, 301–318.
7.
Keller, T. (2001). “Recent all-composite and hybrid fiber-reinforced polymer bridges and buildings.” Prog. Struct. Eng. Mater., 3(2), 132–140.
8.
Keller, T. (2002). “Influences of advanced composite materials on structural concepts for bridges and buildings.” Proc., 3rd Int. Conf. on Composites in Infrastructure ICCI’02 (CD ROM), San Francisco.
9.
Luke, S., Knudsen, E., and Täljsten, B. (2002). “Advanced composite bridge decking system – project ASSET.” Struct. Eng. Int. (IABSE, Zurich, Switzerland), 12(2), 76–79.
10.
Mottram, J.T., and Padilla-Contreras, E. (2001). “Pin-bearing behavior of pultruded structural materials.” Proc., Int. Conf. on Composites in Construction CCC2001, A.A. Balkema, Lisse, The Netherlands, 165–170.
11.
Schniepp, T.J., Hayes, M.D., Lesko, J.J., and Cousins, T.E. (2002). “Design manual development for the 36-inch double-web beam.” Proc., 3rd Int. Conf. on Composites in Infrastructure ICCI’02 (CD ROM), San Francisco.
12.
Zureick, A., and Scott, D. (1997). “Short-term behavior and design of fiber reinforced polymeric slender members under axial compression.” J. Compos. Constr., 1(4), 140–149.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 ASCE.
History
Published online: Oct 1, 2004
Published in print: Oct 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.