Experimental Response and Code Modelsof GFRP RC Beams in Bending
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Composites for Construction
Volume 4, Issue 4
Abstract
The use of composite materials in structural engineering is recent, and researchers need to investigate their behavioral features. Design criteria and methods have to be redefined, and several countries have already established design procedures specifically for fiber-reinforced plastic (FRP) use. Generally the proposed code modifications are conservative and the strength capacity of FRP materials is not efficiently used. This limitation is due to the low number of experimental tests on concrete structures reinforced with FRP bars. In this paper, experimental tests on beams reinforced with glass FRP bars are presented and discussed. Significant features of the structural behavior are pointed out regarding curvature, deflection, and crack spacing and width. Furthermore the verifications at ultimate and serviceability conditions are analyzed. Code formulations for deflection and crack width calculation are examined considering the American Concrete Institute and the Eurocode 2 approaches.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abdalla, H., El-Brady, M. M., and Rizkalla, S. H. ( 1996). “Deflection of concrete slabs reinforced with advanced composite materials.” Proc., 2nd Int. Conf. Advanced Compos. Mat. in Bridges and Struct., Canadian Society for Civil Engineering, Montreal, 201–208.
2.
American Concrete Institute (ACI). ( 1996a). “Building code requirements for reinforced concrete and commentary.” ACI 318-95, Detroit.
3.
American Concrete Institute (ACI). ( 1996b). “State of art report on fiber reinforced plastic reinforcement for concrete structures.” ACI 440R-96, Detroit.
4.
Canadian Standard Association (CSA) ( 1996). “Fiber reinforced concrete.” Canadian highway bridge design code, Sect. 16, Toronto.
5.
Cosenza, E., Manfredi, G., Pecce, M., and Realfonzo, R. ( 1999). “Bond between GFRP rebars and concrete: An experimental analysis.” Proc., 4th Int. Symp. on Fiber Reinforced Polymer for Reinforced Concrete Struct., American Concrete Institute, Detroit, 347–358.
6.
Cosenza, E., Manfredi, G., and Realfonzo, R. (1997). “Behavior and modeling of bond of FRP rebars to concrete.”J. Compos. for Constr., ASCE, 1(2), 40–51.
7.
Duranovic, N., Pilakoutas, K., and Waldron, P. ( 1997). “Tests on concrete beams reinforced with glass fibre reinforced plastic bars.” Proc., 3rd Int. Symp. on Fiber Reinforced Polymer for Reinforced Concrete Struct., Japan Concrete Institute, Tokyo, 479–486.
8.
EuroCode 2 (EC2). ( 1992). “Design of concrete structures—Part 1-1: General rules and rules for buildings.” ENV 1992-1-1, Brussels, Belgium.
9.
GangaRao, H. V. S., and Vijay, P. V. ( 1997). “Design of concrete members reinforced with GFRP bars.” Proc., 3rd Int. Symp. on Fiber Reinforced Polymer for Reinforced Concrete Struct., Japan Concrete Institute, Tokyo, 143–150.
10.
Gao, D., Benmokrane, B., and Masmoudi, R. ( 1998). “A calculating method of flexural properties of FRP-reinforced concrete beam. Part 1: Crack width and deflection.” Tech. Rep., Dept. of Civ. Engrg., University of Sherbrooke, Sherbrooke, Canada.
11.
Japan Society of Civil Engineering (JSCE). ( 1997). Recommendation for design and construction of concrete structures using continuous fiber reinforcing materials, Concrete Engrg. Ser. No. 23, Tokyo.
12.
Mander, J. B., Priestley, M. J. N., and Park, R. (1988). “Theoretical stress-strain model for confined concrete.”J. Struct. Engrg., ASCE, 114(8), 1804–1826.
13.
Eurocrete, cement and concrete, Sintef, Trondheim, Norway.
14.
Nanni, A. (1993). “Flexural behaviour and design of RC members using FRP reinforcement.”J. Struct. Engrg., ASCE, 119(11), 3344–3359.
15.
Pecce, M., Manfredi, G., and Cosenza, E. ( 1998). “Experimental behaviour of concrete beams reinforced with glass FRP bars.” Proc., 8th Eur. Conf. on Compos. Mat., Woodhead Publishing Limited, Cambridge, U.K., 227–234.
16.
Al-Salloum, Y. A., Alsayed, S. H., Almusallam, T. H., and Amjad, M. A. ( 1996). “Evaluation of service load deflection for beams reinforced by GFRP bars.” Proc., 2nd Int. Conf. Advanced Compos. Mat. in Bridges and Struct., Canadian Society for Civil Engineering, Montreal, 165–172.
17.
Theriault, M., and Benmokrane, B. (1997). “Effects of FRP reinforcement ratio and concrete strength on flexural behavior of concrete beams.”J. Compos. for Constr., ASCE, 2(1), 7–16.
Information & Authors
Information
Published In
History
Received: Dec 29, 1998
Published online: Nov 1, 2000
Published in print: Nov 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.