Local Bond-Slip Relationship for FRP Reinforcement in Concrete
Publication: Journal of Composites for Construction
Volume 4, Issue 1
Abstract
The objective of this paper is to define a rigorous numerical method to calibrate parameters of a given local bond-slip relationship using experimental results of pullout tests, taking into account the distribution of the slip and bond shear stress throughout the bar. The proposed method involves finding parameters of a given bond-slip relationship, such that results of pullout tests can be predicted in terms of applied pullout force and consequent slip at the loaded end and slip at the free end. The method is applied to some experimental data, and the results are discussed. For the application of the proposed method, two analytical expressions of the bond-slip relationship are selected, even though it could be applied to any analytical expression. An example of determination of anchorage length starting from the knowledge of the local bond-slip relationship is given.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Alunno Rossetti, V., Galeota, D., and Giammatteo, M. M. (1995). “Local bond stress-slip relationships of fibre reinforced plastic bars embedded in concrete.” Mat. and Struct., 28, 340–344.
2.
Chaallal, O., and Benmokrane, B. (1993). “Pullout and bond of glass-fibre rods embedded in concrete and cement grout.” Mat. and Struct., 26, 135–145.
3.
Cosenza, E., Manfredi, G., and Realfonzo, R. (1996). “Il calcolo della lunghezza di ancoraggio per barre in plastica fibro-rinforzata (FRP).” Proc., 11th congresso CTE, 451–461 (in Italian).
4.
Cosenza, E., Manfredi, G., and Realfonzo, R. (1997). “Behavior and modeling of bond of FRP rebars to concrete.”J. Compos. for Constr., ASCE, 1(2), 40–51.
5.
Eligehausen, R., Popov, E. P., and Bertero, V. V. (1983). “Local bond stress-slip relationships of deformed bars under generalized excitations.” Rep. No. 83/23, Envir. Engrg. Res. Council, University of California, Berkeley, Calif.
6.
Freimanis, A. J., Bakis, C. E., Nanni, A., and Gremel, D. (1998). “A comparison of pull-out and tensile behaviors of FRP reinforcement for concrete.” Proc., 2nd Int. Conf. on Compos. in Infrastructure, H. Saadatmanesh and M. R. Ehsani, eds., Vol. II, University of Arizona, Tucson, Ariz., 52–65.
7.
Greco, C., Manfredi, G., Pecce, M., and Realfonzo, R. (1998). “Experimental analysis of bond between GFRP deformed rebars and concrete.” Proc., ECCM-8—Eur. Conf. on Compos. Mat., I. Crivelli Visconti, ed., Vol. 2, 301–308.
8.
Larralde, J., and Silva-Rodriguez, R. (1993). “Bond and slip of FRP rebars in concrete.”J. Mat. in Civ. Engrg., ASCE, 5(1), 30–40.
9.
Malvar, L. J. (1995). “Tensile and bond properties of GFRP reinforcing bars.” ACI Mat. J., 92(3), 276–2985.
10.
Nanni, A., Al-Zaharani, M. M., Al-Dulaijan, S. U., Bakis, C. E., and Boothby, T. E. (1995). “Bond of FRP reinforcement to concrete—Experimental results.” Proc., 2nd Int. RILEM Symp. (FRPRCS-2)—Non-Metallic (FRP) Reinforcement for Concrete Struct., L. Taerwe, ed., 135–145.
11.
Nelder, J. A., and Mead, R. (1965). “A simplex method for function minimization.” Comp. J., 7, 308–313.
12.
Russo, G., Zingone, G., and Romano, F. (1990). “Analytical solution for bond-slip of reinforcing bars in R.C. joints.”J. Struct. Engrg., ASCE, 116(2), 336–355.
13.
“State of the art report on fiber reinforced plastic reinforcement for concrete structure.” (1996). ACI 440R-96, American Concrete Institute, Detroit.
Information & Authors
Information
Published In
Journal of Composites for Construction
Volume 4 • Issue 1 • February 2000
Pages: 24 - 31
History
Received: Nov 12, 1998
Published online: Feb 1, 2000
Published in print: Feb 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.