Short-Term Behavior and Design of Fiber-Reinforced Polymeric Slender Members under Axial Compression
Publication: Journal of Composites for Construction
Volume 1, Issue 4
Abstract
Presented in this paper are results of an experimental investigation pertaining to the short-term behavior of concentrically loaded fiber-reinforced polymeric composite slender members. Tested members had box and I-shape cross sections and were pultruded using a vinylester matrix containing flame retardant additives reinforced with E-glass roving and nonwoven mats. Material properties for each tested member are used in a limit state predictor equation to correlate the experimental and the predicted results. Design guidelines and a step-by-step example are also presented.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bank, L. C.(1987). “Shear coefficients for thin-walled composite beams.”Compos. Struct., 8(1), 47–61.
2.
Barbero, E. J., and Raftoyiannis, I. G.(1993). “Euler buckling of pultruded composite columns.”Compos. Struct., 24(2), 139–147.
3.
Barbero, E. J., and Tomblin, J.(1993). “Euler buckling of thin-walled composite columns.”Thin-Walled Struct., 17(4), 237–258.
4.
Barbero, E. J., and Tomblin, J.(1994). “A phenomenological design equation for FRP columns with interaction between local and global buckling.”Thin-Walled Struct., 18(2), 117–131.
5.
Cowper, G.(1966). “The shear coefficient in Timoshenko's beam theory.”J. Appl. Mech., 33(2), 335–340.
6.
Dharmarajan, S., and McCutchen, H. Jr.(1973). “Shear coefficients for orthotropic beams.”J. Compos. Mat., 7(4), 530–535.
7.
Engesser, F. (1989). “Die Knickfestigkeit gerader Stabe.”Zeitschrift für Architekter und Ingenieur Vereins zu Hannover, Weisbaden, Germany, 35, 455 (in German).
8.
Goodman, J. W., and Gilksman, J. A. (1969). “Structural evaluation of long boron composite column.”Composite materials: Testing and design, ASTM STP 460, West Conshohocken, Pa., 460–469.
9.
Hashem, Z. A. (1993). “Structural behavior of plastic composite columns,” PhD dissertation, University of Texas at Arlington, Tex.
10.
Hewson, P. J.(1978). “Buckling of pultruded glass fibre-reinforced channel sections.”Compos., 9(17), 56–60.
11.
Kardomateas, G. A.(1997). “Buckling of moderately thick orthotropic columns: Comparison of an elasticity solution with the Euler and Engesser/Haringx/Timoshenko formulae.”Int. J. Solids and Struct., 34(3), 341–357.
12.
Lee, D. J., and Hewson, P. J. (1978). “The use of fibre-reinforced plastics in thin-walled structures.”Stability problems in engineering structures and components, T. H. Richards and P. Stanley, eds., Elsevier Applied Science, New York, N.Y., 23–55.
13.
Mottram, J. T. (1991). “Structural properties of a pultruded E-glass fibre-reinforced polymeric I-beam.”Proc., 6th Int. Conf. on Compos. Struct., I. H. Marshall, ed., Elsevier Applied Science, London, U.K., 1–28.
14.
Scott, D., Yoon, S. J., and Zureick, A. (1992). “Full scale test on concentrically loaded fiber reinforced pultruded columns.”Proc., Mat. Engrg. Congr., T. D. White, ed., ASCE, New York, N.Y., 572–576.
15.
Southwell, R. V. (1932). “On the analysis of experimental observations in problems of elastic stability.”Proc., Royal Soc., Series A, Vol. 135(826), London, U.K., 601–616.
16.
Teh, K., and Huang, C.(1979). “Shear deformation coefficient for generally orthotropic beam.”Fiber Sci. and Technol., 12, 73–80.
17.
Timoshenko, S. (1940). Strength of materials—Part 1, 2nd ed., Van Nostrand Reinhold, New York, N.Y.
18.
Trayer, G. W., and March, H. W. (1931). “Elastic instability of members having sections common in aircraft construction.”Rep. No. 382, National Advisory Council for Aeronautics, Washington, D.C.
19.
Turvey, G. (1992). “Tension/compression strength of unnotched/notched pultruded GRP plate.”Proc., Eur. Conf. on Compos. Testing and Standardisation, Bordeaux, France, 167–176.
20.
Wang, Y., and Zureick, A. H.(1994). “Characterization of the longitudinal tensile behavior of pultruded I-shape structural members using coupon specimens.”Compos. Struct., 29, 463–472.
21.
Ye, B. S., Svenson, A. L., and Bank, L. C.(1995). “Mass and volume fraction properties of pultruded glass fibre-reinforced composites.”Compos., 26(10), 725–731.
22.
Yoon, S., Scott, D., and Zureick, A. (1992). “An experimental investigation of the behavior of concentrically loaded pultruded columns.”Proc., 1st Int. Conf. on Advanced Compos. Mat. in Bridges and Struct., K. W. Neale and P. Labossière, eds., Montreal, Canada, 309–317.
23.
Zahn, J. J.(1992). “Reexamination of Ylinen and other column equations, interaction of rupture and buckling in wood members.”J. Struct. Engrg., ASCE, 118(10), 2716–2728.
24.
Zureick, A., Yoon, S., and Scott, D. (1992). “Experimental investigation on concentrically loaded pultruded columns.”Proc., 2nd Int. Symp., Textile Compos. in Build. Constr., P. Hamlin and G. Verchery, eds., Paris, France, Part 2, 207–215.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Nov 1, 1997
Published in print: Nov 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.