Characterization of Chromite Ore Processing Residue
Publication: Practice Periodical of Hazardous, Toxic, and Radioactive Waste Management
Volume 11, Issue 4
Abstract
This paper summarizes the characteristics of chromite ore processing residue (COPR) in terms of their chemical compositions, phases, and recycling potential of iron and chromium through preliminary magnetic separation. COPR from nine hazardous waste sites in Hudson County, N.J., were analyzed using nondestructive instruments including environmental scanning electron microscope, x-ray diffraction spectrometer, and x-ray fluorescence spectrometer. The test results revealed that major phases of COPR were , iron/chromium containing spinel, and . Concentrations of iron-containing phases, calculated as , ranged from 10 to 33% by weight. The COPR samples from nine sites can be divided into two groups, one with high concentration of iron oxide (20–33%) in a form of spinel having magnetic property, and another with low concentration of iron oxide (10–15%) without magnetic property. The manual/dry magnetic separation was able to concentrate iron and chromium oxides in COPR from the former group to 34.9–40.9 and 6.3–8.6%, respectively. The morphology of COPR from a sample containing high iron content revealed that COPR is mainly the remnant of chromite ore. The characteristics of COPR are different from those chromium-contaminated soils from other sources. The study will provide essential information for further remediation and recycling potential for COPR.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers wish to acknowledge NSF Grant No. NSFECS-9214571 to NJIT to create a state-of-the-art Geo-environmental laboratory. This facility was used to conduct this research. The writers also acknowledge the suggestions made by the reviewers, which significantly improved the presentation.
References
Burke, T., Fagliano, J., Goldoft, M., Hazen, R. E., Tglewicz, R., and Mckee, T. (1991). “Chromite ore processing residue in Hudson County, New Jersey.” Environ. Health Perspect., 92, 131–137.
Hillier, S., Roe, M. J., Geelhoed, J. S., Fraser, A. R., Farmer, J. G., and Paterson, E. (2003). “Role of quantitative mineralogical analysis in the investigation of sites contaminated by chromite ore processing residue.” Sci. Total Environ., 308(1–3), 195–210.
Kamolpornwijit, W. (2000). “A feasibility study to convert chromium contaminated soil to iron with chromium—From a waste to a construction material.” Ph.D. thesis, New Jersey Institute of Technology, Newark, N.J.
Katz, S. A., and Salem, H. (1994). Biological and environmental chemistry of chromium, VCH, New York.
Meegoda, J. N., et al. (1995). “Remediation and reuse of chromium contaminated soils through cold top in-situ vitrification.” Proc., 27th Mid-Atlantic Industrial Waste Conf., Bethlehem, Pa. 733–742.
Meegoda, J. N., Kamolpornwijit, W., Vaccari, D. A., Ezeldin, A. S., Noval, B. A., Mueller, R. T., and Santora, S. (1999). “Remediation of chromium-contaminated soils: A bench-scale investigation.” Pract. Period. Hazard. Toxic Radioact. Waste Manage., 3(3), 124–131.
Taggart, A. F. (1947). Handbook of mineral dressing, ores and industrial minerals, Wiley, N.Y.
Udy, M. J. (1956). Chromium, Vol. 1, Reinhold, New York.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Jul 14, 2006
Accepted: Feb 27, 2007
Published online: Oct 1, 2007
Published in print: Oct 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.