Leaching of Heavy Metals Stabilized in Asphalt Matrix
Publication: Practice Periodical of Hazardous, Toxic, and Radioactive Waste Management
Volume 11, Issue 2
Abstract
Long-term impact of stabilized/solidified hazardous waste on the environment was evaluated using a combination of long-term leaching tests and mathematical modeling. The waste used in this research is a dust collected from filters used in the production of nickel-cadmium accumulators. It contains nickel hydroxide, cobalt hydroxide, and cadmium oxide, and based on toxicity characteristic leaching procedure test it is a hazardous waste. This waste was stabilized using two different aqueous anionic asphalt emulsions. Several extraction tests were used to evaluate the long-term leaching of stabilized waste. Then using a mathematical model, the long-term leaching test data was analyzed to obtain mass transport parameters for the contaminants in the stabilized wastes. From the leaching test results mathematical model parameters needed to estimate the transport and release of contaminants to the real environment under alkaline pH from the stabilized waste were obtained. The model simulation of the performance of the stabilized waste under the actual environmental conditions of the disposal site showed that there is insignificant release of the contaminants from the stabilized waste. Hence it was concluded based on the experimental and modeling data that if the environment is able to maintain an alkaline pH condition, then the stabilized waste will not damage the environment.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers would like to acknowledge the Latexfalt b.v., Koudekerk a/d Rijn, The Netherlands, and ESHA Nederland b.v., Groningen, The Netherlands, for providing asphalt emulsions. The writers also acknowledge the suggestions made by the two reviewers, which significantly improved the presentation.
References
Andres, A., Ortis, I., Viguri, J. R., and Irabien, A. (1995). “Long-term behavior of toxic metals in stabilized steel foundry dusts.” J. Hazard. Mater., 40(1), 31–42.
Blaha, A. (1984). Kandidátské minimum, Katedra Kožedělné Technologie, Fakulta Technologická ve Zlíně, VUT Brno (in Czech).
Blaha, A., and Kolomazník, K. (1989). “Mathematical model of soaking I.” J. Soc. Leather Technol. Chem., 73(5), 136–140.
Blaha, A., Kolomazník, K., and Dederle, T. (1989). “Mathematical model of soaking II.” J. Soc. Leather Technol. Chem., 73(6), 172–174.
Cai, Z., Bagr, D. H., and Christensen, T. H. (2004). “Leaching from solid waste incineration ashes used in cement-treated base layers for pavements.” Waste Manage., 24(6), 603–612.
Červeková, M., Bartůnek, J., Vondruška, M., and Bednařík, V. (2004a). “Stabilizace/solidifikace nebezpečných odpadů pomocí asfaltových emulzí.” Mezinárodní konference Odpady 2004, Spišská Nová Ves, Slovensko, 214-223 (in Czech).
Červeková, M., Blaha, A., Meegoda, J. N., and Vondruška, M. (2004b). “Predicting the release of contaminants from solidified/stabilized waste based on long-term leaching test.” 16th Int. Congress of Chemical and Process Engineering CHISA 2004, Prague, Czech Republic.
Červinková, M., Blaha, A., Meegoda, J. N., and Vondruška, M. (2005). “Long-term release of contaminants from solidified/stabilized waste.” Int. Conf. WasteEng05, Albi, France.
Crank, J. (1975). The mathematics of diffusion, Oxford University Press, Oxford, U.K.
Kolomazník, K. (1980). Kožařství, Fakulta Technologická ve Zlíně, VUT Brno (in Czech).
Meegoda, J. N. (1999). “Stabilization/solidification of contaminated soils with asphalt emulsions.” Pract. Period. Hazard. Toxic Radioact. Waste Manage., 3(1), 46–55.
Moszkowicz, P., Sanchez, F., Barna, R., and Mehu, J. (1998). “Pollutants leaching behavior from solidified wastes: A selection of adapted various models.” Talanta, 46(3), 375–383.
NNI. (1994). “Leaching characteristics of building and solid waste materials—Leaching tests: Determination of the leaching behavior of inorganic components from shaped building materials, monolithic, and stabilized waste materials.” NEN 7345, Amsterdam, The Netherlands.
Onguro, V. O., and Inyang, H. I. (2003). “Relating batch and column diffusion coefficients for leachable contaminants in particulate waste materials.” J. Environ. Eng., 129(10), 930–942.
Pourbaix, M. (1966). Atlas of electrochemical equilibria in aqueous solutions, Pergamon, Oxford, U.K.
Public Notice 383/2001 Sb. (2001). Vyhláška Ministerstva životního prostředí o podrobnostech nakládání s odpady, Ministry of Environment, Czech Republic.
Sild, M., Vondruska, M., Koutny, M., and Bednarik, V. (2004). “Stabilization/solidification of noncombustible industrial waste by asphalt emulsions.” Pract. Period. Hazard. Toxic Radioact. Waste Manage., 8(1), 2–6.
Statue-book of the Czech Republic. (2001). “O odpadech.” 185/2001 Sb, Prague, the Czech Republic (in Czech).
U.S. Environmental Protection Agency (USEPA). (1986). “Toxicity characteristic leaching procedure.” Method 1311/1986, Washington, D.C.
U.S. Environmental Protection Agency (USEPA). (2001). “Multiple extraction procedure.” Method 1320/2001, Washington, D.C.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Nov 10, 2005
Accepted: Jun 29, 2006
Published online: Apr 1, 2007
Published in print: Apr 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.