Development of Probabilistic Multimedia Multipathway Computer Codes
Publication: Practice Periodical of Hazardous, Toxic, and Radioactive Waste Management
Volume 6, Issue 1
Abstract
The deterministic multimedia dose/risk assessment codes RESRAD and RESRAD-BUILD have been widely used for many years for evaluation of sites contaminated with residual radioactive materials. The RESRAD code applies to the cleanup of sites (soils) and the RESRAD-BUILD code applies to the cleanup of buildings and structures. This work describes the procedure used to enhance the deterministic RESRAD and RESRAD-BUILD codes for probabilistic dose analysis. A six-step procedure was used in developing default parameter distributions and the probabilistic analysis modules. These six steps include (1) listing and categorizing parameters; (2) ranking parameters; (3) developing parameter distributions; (4) testing parameter distributions for probabilistic analysis; (5) developing probabilistic software modules; and (6) testing probabilistic modules and integrated codes. The procedures used can be applied to the development of other multimedia probabilistic codes. The probabilistic versions of RESRAD and RESRAD-BUILD codes provide tools for studying the uncertainty in dose assessment caused by uncertain input parameters. The parameter distribution data collected in this work can also be applied to other multimedia assessment tasks and multimedia computer codes.
Get full access to this article
View all available purchase options and get full access to this article.
References
BIOMOVS II Steering Committee (1996). “Long-term contaminant migration and impacts from uranium mill tailings—comparison of computer models using a realistic dataset.” BIOMOVS II Technical Rep. No. 5., Swedish Radiation Protection Institute, Stockholm, Sweden.
Biwer, B. M., et al. (2000). “Parameter distributions for use in RESRAD and RESRAD-BUILD computer codes, revision 1.” Argonne National Laboratory, Argonne, Ill., for U.S. Nuclear Regulatory Commission, Washington, D.C.
Camus, H., et al. (1999). “Long-term contaminant migration and impacts from uranium mill tailings.” J. Environ. Radioact., 42, 289–304.
Cheng, J.-J., et al. (1995). “Benchmarking analysis of three multimedia models: RESRAD, MMSOILS, and MEPAS.” Rep. No. DOE/ORO-2033, U.S. Department of Energy, Washington, D.C.
Faillace, E. R., Cheng, J.-J., and Yu, C. (1994). “RESRAD benchmarking against six radiation exposure pathway models.” ANL/EAD/TM-24. Argonne National Laboratory, Argonne, Ill.
Ferson, S.(1996). “What Monte Carlo methods cannot do.” Human Ecolog. Risk Assess., 2(4), 990–1007.
Gnanapragasam, E. K., and Yu, C. (1997a). “Analysis of BIOMOVS II uranium mill tailings scenario 1.07 with the RESRAD computer code.” ANL/EAD/TM-66, Argonne National Laboratory, Argonne, Ill.
Gnanapragasam, E. K., and Yu, C. (1997b). “Application of the RESRAD computer code to VAMP scenario S.” ANL/EAD/TM-70, Argonne National Laboratory, Argonne, Ill.
Halliburton NUS Corporation (1994). “Verification of RESRAD. A code for implementing residual radioactive material guidelines, version 5.03.” HNUS-ARPD-94-174, Halliburton NUS Corporation, Gaithersburg, Md.
Iman, R. L., and Helton, J. C. (1985). “A comparison of uncertainty and sensitivity analysis techniques for computer models.” NUREG/CR-3904, SAND84-1461 RG, Sandia National Laboratories, Albuquerque, N. M., for the U.S. Nuclear Regulatory Commission, Washington, D.C.
Iman, R. L., and Shortencarier, M. J. (1984). “A FORTRAN 77 program and user’s guide for the generation of Latin hypercube and random samples for use with computer models.” NUREG/CR-3624, SAND83-2365 RG., Sandia National Laboratories, Albuquerque, N. M., for U.S. Nuclear Regulatory Commission, Washington, D.C.
International Atomic Energy Agency (IAEA). (1989). “Evaluating reliability of predictions made using environmental transfer models.” IAEA Rep. No. 100, Vienna, Austria.
International Atomic Energy Agency (IAEA). (1996). “Validation of models using Chernobyl fallout data from southern Finland, scenario S.” IAEA-TECDOC-904. Second Rep. of the VAMP Multiple Pathways Assessment Working Group, Vienna, Austria.
International Commission on Radiological Protection (ICRP). (1984). Principles of monitoring for the protection of the population. ICRP Publication 43, Pergamon, Tarrytown, N.Y.
Kamboj, S., et al. (2000). “Probabilistic dose analysis using parameter distributions developed for RESRAD and RESRAD-BUILD codes.” NUREG/CR-6676, ANL/EAD/TM-89, Argonne National Laboratory, Argonne, Ill., for U.S. Nuclear Regulatory Commission, Washington, D.C.
Laniak, G. F., et al. (1997). “An overview of a multimedia benchmarking analysis for three risk assessment models: RESRAD, MMSOILS, and MEPAS.” Risk Anal., 17(2), 203–214.
LePoire, D., et al. (2000). “Probabilistic modules for the RESRAD and RESRAD-BUILD computer codes.” ANL/EAD/TM-91, Argonne National Laboratory, Argonne, Ill., for U.S. Nuclear Regulatory Commission, Washington, D.C.
McKay, M. D., et al. (1979). “A Comparison of three methods for selecting values of input variables in the analysis of output from a computer code.” Technometrics, 21(2), 239–245.
Mills, W. B., et al. (1997). “Multimedia benchmarking analysis for three risk assessment models: RESRAD, MMSOILS, and MEPAS.” Risk Anal., 17(2), 187–201.
Regens, J. L., et al. (1998). “Multimedia modeling and risk assessment.” U.S. Department of Energy, Consortium for Environmental Risk Evaluation, Washington, D.C.
Seitz, R. R. et al. (1994). “Benchmarking of computer codes and approaches for modeling exposure scenarios.” DOE/LLW-188, Radioactive Waste Technical Support Program, Idaho National Engineering Laboratory, Idaho Falls, Id., for U.S. Department of Energy, Washington, D.C.
Whelan, G., et al. (1999a). “Benchmarking of the saturated-zone module associated with three risk assessment models: RESRAD, MMSOILS, and MEPAS.” Environ. Eng. Sci., 16(1), 67–80.
Whelan, G., et al. (1999b). “Benchmarking of the vadose-zone module associated with three risk assessment models: RESRAD, MMSOILS, and MEPAS.” Environ. Eng. Sci., 16(1), 81–91.
Yu, C. (1999). “RESRAD family of codes and comparison with other codes for decontamination and restoration of nuclear facilities.” Chapter 11, 207–231, Health physics society 1999 summer school textbook, M. J. Slobodien, ed., Medical Physics, Madison, Wis.
Yu, C., et al. (1993). “Data collection handbook to support modeling the impacts of radioactive material in soil.” ANL/EAIS-8, Argonne National Laboratory, Argonne, Ill.
Yu, C., et al. (1994). “RESRAD-BUILD: a computer model for analyzing the radiological dose resulting from the remediation and occupancy of buildings contaminated with radioactive material,” ANL/EAD/LD-3, Argonne National Laboratory, Argonne, Ill.
Yu, C., et al. (2000). “Development of probabilistic RESRAD 6.0 and RESRAD-BUILD 3.0 computer codes.” NUREG/CR-6697, ANL/EAD/TM-98, Argonne National Laboratory, Argonne, Ill, for U.S. Nuclear Regulatory Commission, Washington, D.C.
Yu, C., et al. (2001). “User’s manual for RESRAD version 6.” ANL/EAD-4, Argonne National Laboratory, Argonne, Ill.
Yu, C., and Gnanapragasam, E. (1995). “Testing RESRAD predictions with Chernobyl data.” Int. Symposium on the Environmental Impact of Radioactive Releases, IAEA-SM-339/129, International Atomic Energy Agency, Vienna, Austria.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Oct 3, 2001
Accepted: Oct 5, 2001
Published online: Jan 1, 2002
Published in print: Jan 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.