Practical Bedrock Aquifer Characterization Using Borehole Geophysics and Multilevel Wells
Publication: Practice Periodical of Hazardous, Toxic, and Radioactive Waste Management
Volume 5, Issue 2
Abstract
Characterizing and monitoring contaminated bedrock aquifers remains an enormous challenge with important consequences. Investigations of bedrock aquifers are challenging for two principle reasons: heterogeneity and costs. This paper demonstrates that successful characterization is possible and describes a strategy using borehole geophysics and multilevel wells that greatly increases the chances of success. A cost evaluation shows that, while these methods can be expensive, proper application may reduce long-term monitoring costs. The increasing use of low-flow sampling techniques and the rising popularity of monitored natural attenuation remedies should lead to increased application of this strategy. The case study site is a hilltop landfill overlying a heterogeneous bedrock aquifer and surrounded by homes using domestic wells. Borehole geophysical and heatpulse-flowmeter data identified 1–2 water-bearing zones (WBZs) per 30 m drilled. Multilevel wells focused sampling on WBZs and provided detailed plume characterization and monitoring that will help to protect local domestic wells. Review of logs from monitoring well MW-8 shows how borehole geophysics identified seven individual WBZs, and sampling of the multilevel well revealed important variations in chemical and potentiometric signatures between the WBZs. This detailed characterization was necessary to support the site conceptual model and demonstrated that domestic wells were not threatened.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Church, P. E., and Granato, G. E. ( 1996). “Bias in ground-water data caused by well-bore flow in long-screen wells.” Ground Water, 34(2), 262–273.
2.
Geyer, A. R., Buckwalter, T. V., McLaughlin, D. B., and Gray, C. ( 1963). “Geology of the Womelsdorf Quadrangle.” Atlas 177 C, Pennsylvania Geological Survey, Harrisburg, Pa.
3.
Long, J. C. S., Remer, J. S., Wilson, S. R., and Witherspoon, P. A. ( 1982). “Porous media equivalents for networks of discontinuous fractures.” Water Resour. Res., 18(3), 645–658.
4.
Low, D. J., and Conger, R. W. ( 1998). “Evaluation of geophysical logs and video surveys in boreholes adjacent to the Berkley Products Superfund site, West Cocalico Township, Lancaster County, Pennsylvania.” Open-File Rep. 98-645, U.S. Geological Survey, Lemoyne, Pa.
5.
Melchior, D., and Cutler, M. ( 1993). “Deep down cost reductions.” Water Envir. and Technol., 5(10), 66–69.
6.
Puls, R. W., and Barcelona, M. J. ( 1995). “Low-flow (minimal drawdown) ground-water sampling procedures.” Ground Water Issues Rep. EPA/540/S-95/504, U.S. Environmental Protection Agency, Ada, Okla.
7.
Smoot, J. P. ( 1999). “Early Mesozoic sedimentary rocks.” The Geology of Pennsylvania, Pennsylvania Geological Survey, Harrisburg, Pa., 181–201.
8.
Wood, C. R. ( 1980). “Groundwater resources of the Gettysburg and Hammer Creek Formations, southeastern Pennsylvania.” Water Resour. Rep. 49, Pennsylvania Geological Survey, Harrisburg, Pa.
9.
U.S. Environmental Protection Agency (U.S. EPA). ( 1995). Remedial Investigation Final Rep., Berkley Products Co. Site, Lancaster County, Pennsylvania, Region 3, Philadelphia, Pa.
10.
U.S. Environmental Protection Agency (U.S. EPA). ( 1998). “Seminars on monitored natural attenuation for ground water.” EPA/625/K-98/001. Off. of Res. and Devel., Washington, D.C.
11.
U.S. Environmental Protection Agency (U.S. EPA). ( 1999). “Use of monitored natural attenuation at Superfund, RCRA corrective action, and underground storage tank sites.” Directive 9200.4-17P, Off. of Res. and Devel., Washington, D.C.
Information & Authors
Information
Published In
History
Received: Dec 20, 2000
Published online: Apr 1, 2001
Published in print: Apr 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.