Strategy for Landfill Design in Arid Regions
Publication: Practice Periodical of Hazardous, Toxic, and Radioactive Waste Management
Volume 5, Issue 1
Abstract
The environment and human health of Kuwait, a developing arid country, is in jeopardy due to improper waste disposal management. Hazardous and liquid wastes are frequently commingled with municipal solid waste, which commonly results in environmental degradation. Landfills in Kuwait act as dumping grounds rather than safe disposal sites. Furthermore, the basic tools that assist in the protection of the environment such as a base liner, final cover, and a leachate collection system are not included in these units. In an effort to help Kuwait and developing arid countries build safe landfills for the disposal of the different waste materials; a strategy was adapted to select the best landfill protection tools that are environmentally acceptable and cost effective. The strategy included landfill classification, lab and field tests on natural soils to determine their applicability as liner and cover systems, and finally examining the effectiveness of the design models for the primary tools using Pollutev6 computer program. To examine the effectiveness of the previous strategy items, the strategy was implemented based on the State of Kuwait environment and wastes generation data. The results showed that native cemented calcareous sands (gatch) when compacted could be used as liner and cover systems in Kuwait. Moreover, high-density polyethylene liners are not recommended in this arid region and a leachate collection system is needed due to improper dumping. Overall, the results showed that this strategy is practical and efficient to introduce the minimum requirements for environmentally acceptable landfill sites in such countries.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
AASHTO materials, specifications. (1990). American Association of State Highway and Transportation Officials, Washington, D.C.
2.
Al-Muzaini, S., and Muslmani, K. ( 1994). “Study of the environmental pollution from landfill sites receiving wastes generated during the Iraqi occupation.” Kuwait Institute for Scientific Research, June, Kuwait.
3.
Al-Sulaimi, J. S., El-Sayed, M. I., Salman, A., and Akbar, A. ( 1982). “Study of gatch deposits in Kuwait City and suburbs.” Kuwait Institute for Scientific Research, Kuwait.
4.
Annual Book of ASTM Standards. (1993). 04.08. American Society of Testing and Materials, Philadelphia.
5.
Ball, J. M., Bredenhann, L., and Blight, G. E. ( 1995). “Applications of minimum requirements for landfill design in southern Africa.” Proc., 5th Int. Landfill Symp., Environmental Sanitary Engineering Center, Italy.
6.
Blight, G. E. ( 1996). “Standards for landfills in developing countries.” Waste Mgmt. and Res., 14, 399–414.
7.
Bowles, J. ( 1992). Engineering properties of soils and their measurement, McGraw-Hill, New York.
8.
Daniel, D. E. (1989). “In situ hydraulic conductivity tests for compacted clay.”J. Geotech. Engrg., ASCE, 115(9), 1205–1226.
9.
Daniel, D. E., and Wu, Y.-K. (1993). “Compacted clay liners and covers for arid sites.”J. Geotech. Engrg., ASCE, 119(2), 223–237.
10.
Das, B. M. ( 1985). Principals of geotechnical engineering, PWS Publishing, Boston.
11.
Department of Environmental Protection ( 1994). “Some sides of benefiting or exterminating solid waste in the state of Kuwait.” Rep., Department of Environmental Protection at Ministry of Health, May, Kuwait.
12.
Department of Water Affairs and Forestry ( 1994). Minimum requirement for waste disposal by landfill, CTP Book Printers, Cape Town, South Africa.
13.
Koushki, P. A. ( 1995). “Quantity, classification, and forecasting household solid waste in Kuwait.” Final Report, Kuwait Municipality by Environmental Affairs Department, December.
14.
Kuwait Institute for Scientific Research. ( 1994). “Master plan for the management of solid, semi-solid, liquid wastes in Kuwait (post-liberation).” Proposal, Environmental Protection Council, May, Kuwait.
15.
Kuwait Municipality. ( 1996). “Third Kuwait master plan.” Briefing Documents, November, Kuwait.
16.
Kuwait Planning Ministry. ( 1996). Predictions of population numbers according to nationality between (1995–2000), Statistical Department, December.
17.
Merry, S. M., and Bray, J. D. (1997). “Time-dependent mechanical response of HDPE geomembranes.”J. Geotech. and Geoenvir. Engrg., ASCE, 123(1), 57–65.
18.
Rowe, R. K., Booker, J. R., and Fraser, M. J. ( 1994). Pollutev6 user guide, GAEA Environmental Engineering Ltd., Windsor, Ontario, Canada.
19.
Rowe, R. K., Quigley, R. Q., and Booker, J. R. ( 1995). Clayey barrier systems for waste disposal facilities, E & FN Spon, London.
20.
Sharma, H. D., and Lewis Sangeeta, P. ( 1994). Waste containment systems, waste stabilization, and landfills design and evaluation, Wiley, New York.
21.
Standards Subcommittee D18.04, American Society of Testing and Materials, Philadelphia.
22.
Tchobanoglous, G., Theisen, H., and Vigil, S. ( 1993). Integrated solid waste management engineering principles and management issues, Irwin McGraw-Hill, Boston.
23.
Trautwein, S., and Boutwell, G. ( 1994). “In-situ hydraulic conductivity tests for compacted soil liners and caps.” Hydraulic Conductivity and Waste Contaminant Transport in Soil, ASTM STP 1142, D. Daniel and S. Trautwein, eds., ASTM, Philadelphia, 184–226.
Information & Authors
Information
Published In
History
Received: Oct 15, 1999
Published online: Jan 1, 2001
Published in print: Jan 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.