Engineering Reliability Assessment of Contaminant Removal by Pneumatic Fracturing
Publication: Practice Periodical of Hazardous, Toxic, and Radioactive Waste Management
Volume 4, Issue 1
Abstract
Pneumatic fracturing is a new enhancement process that has been accepted and recognized as a cost-effective technology in removing contaminants from polluted sites. This paper presents an engineering reliability assessment method for mass removal by the pneumatic fracturing process. An analysis was performed of mass removal with respect to four controlling input parameters, including diffusion coefficient, retardation factor, fracture aperture, and flow rate, each of which is stochastic in nature. The reliability index ratios were found to be greater than unity for each input parameter. From a site-remediation standpoint, the analysis reveals the physical significance of the four parameters in the pneumatic fracturing process. The tortuosity and retardation factor probability distributions have important impacts on the mass removal rate. The dimension of fracture aperture shows a limited direct influence on the mass removal with an independent flow rate input. Mass removal is sensitive to flow rate for relatively low flow range. The method described herein is a first attempt in reliability assessment of contaminant removal by pneumatic fracturing. Its approach can be further applied to other remediation operations.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ayyub, B. M., and McCuen, R. H. (1997). Probability, statistics, & reliability for engineers. CRC, New York.
2.
Ding, Y., Schuring, J. R., and Chan, P. C. (1999c). “Volatile contaminant extraction enhanced by pneumatic fracturing.”Pract. Periodical of Haz., Toxic, and Radioactive Waste Mgmt., ASCE, 3(2), 69–76.
3.
Ding, Y., Schuring, J. R., and Chan, P. C. (1999a). “Engineering solution for predicting contaminant removal by pneumatic fracturing.”Pract. Periodical of Haz., Toxic, and Radioactive Waste Mgmt., ASCE, 3(3), 101–106.
4.
Ding, Y., Schuring, J. R., and Chan, P. C. (1999b). “Parameter determination for engineering applications of pneumatic fracturing analysis.” ASCE, 3(4), in press.
5.
Lumb, P. (1974). “Application of statistics in soil mechanics.” Soil mechanics—new horizons, I. K. Lee, ed., Newnes-Butterworths, London.
Information & Authors
Information
Published In
History
Received: Sep 13, 1999
Published online: Jan 1, 2000
Published in print: Jan 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.