Quasi-Monte Carlo Simulation with Low-Discrepancy Sequence for Reinforced Soil Slopes
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 133, Issue 4
Abstract
This paper describes a precise numerical technique to compute the limit state exceedance probability of geosynthetic reinforced soil (GRS) slopes with normally distributed backfill and foundation soils by using the low-discrepancy sequence Monte Carlo (LDSMC) and importance sampling with LDSMC (ISLDSMC) methods. The LDSMC and ISLDSMC methods can effectively compute an accurate limit state exceedance probability of GRS slopes with a limited number of simulations. By using importance sampling, random variables can be generated in an expected failure region, thereby enabling enumeration by the Monte Carlo simulation. The failure region can be searched by the conventional first-order reliability method. To increase the computational efficiency, a low-discrepancy sequence, which is a sequence of quasi-random numbers with uniform distribution, is adopted in this study. The numerical simulation in this study revealed that the LDSMC and ISLDSMC methods can effectively compute an accurate limit state exceedance probability of GRS slopes by performing comparatively fewer simulations than the conventional crude Monte Carlo simulation.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writer would like to acknowledge the critical and informative comments of the editor, Craig Benson, and anonymous referees.
References
Alonso, E. E. (1976). “Risk analysis of slope and its application to slopes in Canadian sensitive clays.” Geotechnique, 26(3), 453–472.
Braaten, E., and Weller, G. (1979). “An improved low-discrepancy sequence for multidimensional quasi-Monte Carlo integration.” J. Comput. Phys., 33, 249–258.
Bratley, P., and Fox, B. L. (1988). “Implementing Sobol’s quasirandom sequence generator.” ACM Trans. Math. Softw., 14(1), 88–100.
Bratley, P., Fox, B. L., and Niederreiter, H. (1992). “Implementation and tests of low-discrepancy sequences.” ACM Trans. Math. Softw., 2(3), 195–213.
Chalermyanont, T., and Benson, C. H. (2004). “Reliability-based design for internal stability of mechanically stabilized earth walls.” J. Geotech. Geoenviron. Eng., 130(2), 163–173.
Christian, J. T., Ladd, C. C., and Baecher, G. B. (1994). “Reliability applied to slope stability analysis.” J. Geotech. Engrg., 120(12), 2180–2207.
Duncan, J. M., Navin, M., and Wolff, T. F. (2003). “Discussion of ‘Probabilistic slope stability analysis for practice.’” Can. Geotech. J., 40, 848–850.
El-Ramly, H., Morgenstern, N. R., and Cruden, D. M. (2002). “Probabilistic slope stability analysis for practice.” Can. Geotech. J., 39, 665–683.
El-Ramly, H., Morgenstern, N. R., and Cruden, D. M. (2003). “Reply to the ‘Discussion by J.M. Duncan, M. Navin, and T.F. Wolff on Probabilistic slope stability analysis for practice.’” Can. Geotech. J., 40, 851–855.
Engelund, S., and Rackwitz, R. (1993). “A benchmark study on importance sampling techniques in structural reliability.” Struct. Safety, 12, 255–276.
Faure, H. (1982). “Discrepancy of sequences associated with a number system (in dimension s).” Acta Arith., 41(4), 337–351.
Fox, B. L. (1986). “Implementation and relative efficiency of quasirandom sequence generators.” ACM Trans. Math. Softw., 12(4), 362–376.
Halton, J. H. (1960). “On the efficiency of certain quasi-random sequences of points in evaluating multi-dimensional integrals.” Numer. Math., 2, 84–90.
Hara, K., and Masuo, T. (2005). “Dispersion of tensile strength of geogrid using ISO geotextile testing protocol.” Geosynthetic Engineering Journal, 20, 287–294 (in Japanese).
Harbitz, A. (1986). “An efficient sampling method for probability of failure calculation.” Struct. Safety, 3, 109–116.
Hasofer, A. M., and Lind, N. C. (1974). “Exact and invariant second-moment code format.” J. Engrg. Mech. Div., 100(1), 111–121.
Hassan, A., and Wolff, T. (1999). “Search algorithm for minimum reliability index of earth slope.” J. Geotech. Geoenviron. Eng., 125(4), 301–308.
Ibrahim, Y. (1991). “Observations of applications of importance sampling in structural reliability analysis.” Struct. Safety, 9, 269–281.
Kocis, L., and Whiten, W. J. (1997). “Computational investigations of low-discrepancy sequences.” ACM Trans. Math. Softw., 23(2), 266–294.
Li, K. S., and Lumb, P. (1987). “Probabilistic design of slopes.” Can. Geotech. J., 24(4), 520–535.
Low, B. K., and Tang, W. H. (1997). “Reliability analysis of reinforced embankment on soft ground.” Can. Geotech. J., 34(5), 672–685.
Low, B. K., Gilbert, R. B., and Wright, S. G. (1998). “Slope reliability analysis using generalized method of slices.” J. Geotech. Geoenviron. Eng., 124(4), 350–362.
Matsumoto, M., and Nishimura, T. (1998). “A 623-dimensionally equidistributed uniform pseudorandom number generator.” ACM Trans. Model. Comput. Simul., 8(1), 3–30.
Matsuo, M., and Kuroda, K. (1974). “Probability approach to design of embankments.” Soils Found., 14(2), 1–17.
Melchers, R. E. (1989). “Importance sampling in structural systems.” Struct. Safety, 6, 3–10.
Melchers, R. E. (1999). Structural reliability analysis and prediction, Wiley, Chichester, U.K., 73–83.
Niederreiter, H. (1978). “Quasi-Monte Carlo methods and pseudo-random numbers.” Bull. Am. Math. Soc., 84(6), 957–1041.
Niederreiter, H. (1988). “Low-discrepancy and low-dispersion sequences.” J. Number Theory, 30, 51–70.
Niederreiter, H. (1992). “Random number generation and quasi-Monte Carlo methods.” CBMS-NSF Regional Conference Series in Applied Mathematics No. 63, SIAM, Philadelphia.
Niederreiter, H., and McCurley, K. (1979). “Optimization of functions by quasi-random search methods.” Computing, 22, 119–123.
Oka, Y., and Wu, T. H. (1990). “System reliability of slope stability.” J. Geotech. Engrg., 116(8), 1185–1189.
Phoon, K. K., Kulhawy, F. H., and Grigoriu, M. D. (1999). “Characterization of geotechnical variability.” Can. Geotech. J., 36(4), 612–624.
Robinson, D. G., and Atcitty, C. (1999). “Comparison of quasi-Monte Carlo sampling for reliability and uncertainty analysis.” Proc., AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, Vol. 4, 2942–2949.
Schueller, G. I., and Stix, R. (1987). “A critical appraisal of methods to determine failure probabilities.” Struct. Safety, 4, 293–309.
Shinoda, M., Horii, K., Yonezawa, T., Tateyama, M., and Koseki, J. (2006). “Reliability-based seismic deformation analysis of reinforced soil slopes.” Soils Found., 46(4), 477–490.
Shinozuka, M. (1983). “Basic analysis of structural safety.” J. Struct. Eng., 109(3), 721–740.
Sobol’, I. M. (1967). “The distribution of points in a cube and the approximate evaluation of integrals.” USSR Comput. Math. Math. Phys., 7, 86–112.
Sobol’, I. M. (1982). “On an estimate of the accuracy of a simple multidimensional search.” Sov. Math. Dokl., 26, 398–401.
Tamura, T., and Shirakawa, H. (1999). “Quasi random number by the generalized Faure sequence and its application to the option evaluation.” JAFEE J., 95–111 (in Japanese).
Tang, W. H., Yucemen, M. S., and Ang, A. H.-S. (1976). “Probability-based short term design of soil slopes.” Can. Geotech. J., 13, 201–215.
Tezuka, S. (1995). Uniform random numbers: Theory and practice, Kluwer Academic, Boston, 161–185.
Vanmarcke, E. H. (1977). “Reliability of earth slopes.” J. Geotech. Engrg. Div., 103(11), 1247–1265.
Whitman, R. V. (1984). “Evaluating calculated risk in geotechnical engineering.” J. Geotech. Engrg., 110(2), 145–188.
Whitman, R. V. (2000). “Organizing and evaluating uncertainty in geotechnical engineering.” J. Geotech. Geoenviron. Eng., 126(7), 583–593.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Nov 28, 2005
Accepted: Oct 13, 2006
Published online: Apr 1, 2007
Published in print: Apr 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.