Load Testing and Settlement Prediction of Shallow Foundation
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 133, Issue 12
Abstract
The purpose of this study was to critically examine insitu test methods as a means for predicting settlement of shallow foundations. Accordingly, a diameter concrete footing was statically load tested. Prior to construction, insitu [standard penetration test (SPT), cone penetration test (CPT), dilatometer (DMT), and pressuremeter (PMT)] and laboratory tests were performed to determine engineering properties of the soil. Predictions of the footing settlement were made by traditional as well as finite element methods. The results of the static load test showed settlements were over predicted by all methods. However, the traditional methods provided reasonable settlement estimates using either SPT- or back computed CPT(N) as input. Finite element analyses using either DMT or CPT derived input parameters provided reasonable settlement estimates. Finite element analyses using SPT or PMT derived input parameters provided poor settlement estimates. The Mohr–Coulomb (elastoplastic) model, accounting for overconsolidation, provided better estimates than the hardening soil (hyperbolic-cap) model for all insitu test derived parameters.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported by the Florida Department of Transportation (RPWO-14, BC-354) under directorship of the project coordinator Peter Lai. Landy Rahelison, currently of Madagascar, performed settlement analysis and assisted with the load testing. Others contributing to the field load testing were: Mike Muchard and Don Robertson of Applied Foundation Testing, Brian Hathaway of Mactec Engineering, Danny Brown, Scott Jacobs, Josh Logan, of the University of Florida, and Paul Bullock of GRL Engineers.
References
Bowles, J. E. (1996). Foundation analysis and design, 5th Ed., McGraw–Hill, New York.
Briaud, J.-L. (1992). The pressuremeter, Balkema, Brookfield, Vt.
Briaud, J.-L., and Gibbens, R. M. (1994). Predicted and measured behavior of five spread footings on sand, GSP 41, ASCE, Reston, Va.
Brinkgreve, R. B. J., and Vermeer, P. A. (1988). Plaxis version 7 user’s guide, Balkema, Rotterdam, The Netherlands.
D’Appolonia, D. J., D’Appolonia, E. D., and Brissette, R. F. (1970). “Closure: Settlement of spread footings on sand.” J. Soil Mech. and Found. Div., 96(2), 754–762.
Das, B. M. (1983). Advanced soil mechanics, Hemisphere, Washington, D.C.
Knowles, V. R. (1991). “Settlement of shallow footings on sand: Report and user’s guide for computer program CSANDSET.” Technical Rep. No. ITL-91-1, USACE Waterways Experiment Station, Vicksburg, Miss.
Marchetti, S., Monaco, P., Totani, G., and Calabrese, M. (2001). “The flat dilatometer test (DMT) in soil investigations: A report by the ISSMGE committee TC16.” Proc., INSITU 2001, Int. Conf. on In Situ Measurement of Soil Properties, Bali, Indonesia.
Mayne, P. W. and Kuchawy, F. H. (1982). “ -OCR Relationships in Soil.” J. Geotech. Engrg. Div., 108(6), 851–872.
Meyerhof, G. G. (1965). “Shallow foundations.” J. Soil Mech. and Found. Div., 91(2), 21–31.
Oweis, I. S. (1979). “Equivalent linear model for predicting settlements of sand bases.” J. Geotech. Engrg. Div., 105(12), 1525–1544.
Peck, R. B., and Bazaraa, A. R. S. (1969). “Discussion of settlement of spread footings on sand.” J. Soil Mech. and Found. Div., 95(3), 905–909.
Peck, R. B., Hansen, W. E., and Thornburn, T. H. (1974). Foundation engineering, Wiley, New York.
Rahelison, L. H. (2002). “Analysis of insitu test derived soil properties with traditional and finite element methods.” Ph.D. dissertation, Univ. of Florida, Gainesville, Fla.
Robertson, P. K., and Campanella, R. G. (1983). “Interpretation of cone penetration tests: Parts 1 and 2.” Can. Geotech. J., 20(20), 718–745.
Schmertmann, J. H. (1986). “Dilatometer to compute foundation settlement.” Use of insitu tests in geotechnical engineering, GSP 6, ASCE, Reston, Va., 303–321.
Schmertmann, J. H., Brown, P. R., and Hartman, J. P. (1978). “Improved strain influence factor Diagrams.” J. Geotech. Engrg. Div., 104(8), 1131–1135.
Schultz, E., and Sherif, G. (1973). “Prediction of settlements from evaluated settlement observations for sand.” Proc., 8th Int. Conf. on Soil Mechanics and Foundation Engineering, Moscow.
Terzaghi, K., and Peck, R. B. (1967). Soil mechanics in engineering practice, Wiley, New York.
Townsend, F. C., Anderson, J. B., and Rahelison, L. H. (2001). “Evaluation of FEM engineering parameters from insitu tests.” Final Rep. No. FDOT BC354-14, Tallahassee, Fla., ⟨http://www.dot.state.fl.us/research_center/Cornpleted_Proj/Summary_STR/FDOT-BC354_14_rpt.pdf⟩.
U.S. Army Corps of Engineers (USALE). (1990). Engineering and design-settlement analyses, manual, No. 1110-1-1904, Washington, D.C.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Apr 27, 2006
Accepted: Aug 23, 2006
Published online: Dec 1, 2007
Published in print: Dec 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.