Ground Movement Predictions for Braced Excavations in Undrained Clay
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 132, Issue 4
Abstract
The writers introduce a design approach for braced excavations based directly on the data of carefully chosen soil tests, conceived within the framework of plasticity theory, but allowing for strain hardening. Mobilized shear stresses beneath and around braced excavations are found by a stability calculation based on a proposed plastic deformation mechanism. Strains required to mobilize these stresses are deduced from a direct simple shear test on a representative sample taken from a selected location in the plastic zone of influence. These strains are entered into a simple plastic deformation mechanism to predict boundary displacements. Hence, the proposed Mobilizable Strength Design (MSD) method can satisfy both safety and serviceability in a single step of calculation, without the need for finite element analyses. In this method, design parameters can be chosen rationally with regard to the initial state of soil, the stiffness following the appropriate stress path, and the level of acceptable deformations under working conditions. Examples demonstrating the success of the MSD method are given for a variety wall and soil conditions. Comparisons are made both with previously published field studies and with comprehensive nonlinear finite element analyses.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers are grateful to Cambridge Commonwealth Trust and to the Committee of Vice-Chancellors and Principals of U.K. universities (Overseas Research Scheme) for their provision of financial support to the first writer.
References
Becker, J. M., and Haley, M. X. (1990). “Up/down construction—Decision making and performance.” Proc., ASCE Conf. the Design and Performance of Earth Retaining Structures, Geotech. Spec. Publ. No. 25, ASCE, New York, 170–189.
Bjerrum, L., and Landva, A. (1966). “Direct simple-shear test on a Norwegian quick clay.” Geotechnique, 16(1), 1–22.
Bjerrum, L., and Eide, O. (1956). “Stability of strutted excavations in clay.” Geotechnique, 6(1), 115–128.
Bolton, M. D., and Powrie, W. (1988). “Behavior of diaphram walls in clay prior to collapse.” Geotechnique, 38(2), 167–189.
Clough, G. W., and Hansen, L. A. (1981). “Clay anisotropy and braced wall behavior.” J. Geotech. Eng. Div., Am. Soc. Civ. Eng., 107(7), 893–913.
Clough, G. W., Smith, E. M., and Sweeney, B. P. (1989). “Movement control of excavation support systems by iterative design.” Proc., ASCE Found. Engrg. Congr., ASCE, New York, Vol. 1, 869–884.
Clough, G. W., and Reed, M. W. (1984). “Measured behavior of braced wall in very soft clay.” J. Geotech. Eng., 110(1), 1–19.
Eide, O., Aas, G., and Josang, T. (1972). “Special application of cast-inplace walls for tunnels in soft clay.” Proc., 5th European Conf. on Soil Mechanics and Foundation Engineering, Madrid, Spain, 1, 485–498.
Garrett, C., and Barnes, S. J. (1984). “Design and performance of the Dunton Green retaining wall.” Geotechnique, 34(4), 533–548.
Hashash, Y. M. A., and Whittle, A. J. (1996). “Ground movement prediction for deep excavations in soft clay.” J. Geotech. Eng., 122(6), 474–486.
Hashash, Y. M. A. (1992). “Analysis of deep excavations in clay.” Ph.D. thesis, MIT, Cambridge, Mass.
Hunt, C. E., Pestana, J. M., Bray, J. D., and Riemer, M. (2002). “Effect of pile driving on static and dynamic properties of soft clay.” J. Geotech. Geoenviron. Eng., 128(1), 13–24.
Ikuta, Y., Maruoka, M., Aoki, M., and Sato, E. (1994). “Application of the observational method to a deep basement excavated using the top-down observation method.” Geotechnique, 44(4), 655–664.
Ladd, C. C., and Edgers, L. (1972). “Consolidated-undranined direct simple shear tests on Boston blue clay.” Res. Report R72-82, MIT, Cambridge, Mass.
Lambe, T. W. (1967). “Stress path method.” J. Soil Mech. Found. Div., 93(6), 309–331.
Mana, A. I., and Clough, G. W. (1981). “Prediction of movements for braced cuts in clay.” J. Geotech. Eng. Div., Am. Soc. Civ. Eng., 107(6), 759–777.
Norwegian Geotechnical Institute. (1962). “Measurements at a strutted excavation, Oslo Subway, Vaterland 1.” Tech. Rep. No. 6, Norwegian Geotechnical Institute, Blindern, Norway.
O’Rourke, T. D. (1993). “Base stability and ground movement prediction for excavations in soft clay.” Retaining structures, Thomas Telford, London, 131–139.
Osman, A. S., and Bolton, M. D. (2004). “A new design method for retaining walls in clay.” Can. Geotech. J., 41(3), 453–469.
Ou, C. Y., Liao, J. T., and Cheng, W. L. (2000). “Building response and ground movements induced by a deep excavation.” Geotechnique, 50(3), 209–220.
Raison, C. A. (1985). “Discussion on performance of proposed and cantilevered rigid walls.” Geotechnique, 35(4), 540–544.
Tanaka, H. (1994). “Behaviour of a braced excavation in soft clay and the undrained shear strength for passive earth pressure.” Soils Found., 34(1), 53–64.
Terzaghi, K. (1943). Theoretical soil mechanics, Wiley, New York.
Whitman, R. V., Johnson, E. G., Abbott, E. L., and Becker, J. M. (1991). “Field instrumentation plays vital role in deep excavation project.” Proc., Geotech. Engrg. Congress, Geotech. Spec. Publ. No. 27, ASCE, New York, 1, 173–184.
Whittle, A. J. (1993). “Evaluation of a constitutive model for overconsolidated clays.” Geotechnique, 43(2), 289–313.
Whittle, A. J. (1987). “A constitutive model for overconsolidated clays with application to the cyclic loading of friction piles.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, MIT, Cambridge, Mass.
Whittle, A. J., and Kavvadas, M. (1994). “Formulation of the MIT-E3 constitutive model for overconsolidated clays.” J. Geotech. Eng., 120(1), 173–198.
Whittle, A. J., DeGroot, D. J., Ladd, C. C., and Seah, T. H. (1994). “Model prediction of anisotropic behavior of Boston blue clay.” J. Geotech. Eng., 120(1), 199–224.
Whittle, A. J., Hashash, Y. M. A., and Whitman, R. V. (1993). “Analysis of deep excavation in Boston.” J. Geotech. Eng., 119(1), 69–90.
Young, D. K., and Ho, E. W. L. (1994). “Observational approach to design of a sheet-piled retaining wall.” Geotechnique, 44(4), 637–654.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: May 27, 2004
Accepted: Jul 12, 2005
Published online: Apr 1, 2006
Published in print: Apr 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.