Degradation of Sands due to Combined Sinusoidal Loading
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 132, Issue 12
Abstract
Dynamic loading due to earthquakes is made up of very complicated combinations of different types of waves including compressive waves, shear waves, etc. If a soil specimen is subjected to a combined longitudinal and torsional excitation, significant degradation of the specimen occurs, wherein the modulus is reduced and the damping increased more than for single excitation. This paper presents equations based on test results on clean sands for the determination of the shear modulus and damping of sandy soils for single and combined sinusoidal loadings. From the equations, the degree of specimen degradation can be determined, as well as the threshold strain ratio needed for the degradation to occur. The dynamic properties obtained from combined loadings will be more representative of actual field conditions than those from single-loading conditions.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aggour, M. S., and Zhang, J. X. (2005). “Prestraining of sand due to various types of combined excitations.” Electronic Proc., Joint ASME/ASCE/SES Conf. on Mechanics and Materials, McMat 2005, Dept. of Civil and Environmental Engineering, Louisiana State Univ., Baton Rouge, La.
Drnevich, V. P., Hardin, B. O., and Shippy, D. J. (1978). “Modulus and damping of soils by the resonant-column method.” Dynamic Geotechnical Testing, ASTM, STP 654, Philadelphia, 91–125.
Griffin, P. M., and Houston, W. N. (1979). “Interaction effects of simultaneous torsional and compressional cyclic loading of sand.” Rep. No. UCB/EERC-79/34, Univ. of California, Berkeley, Calif.
Hardin, B. O. (1970). “Suggested methods of tests for shear modulus and damping of soils by the resonant column.” Special Procedures for Testing Soil and Rock for Engineering Purposes, ASTM, STP 479, Philadelphia, 516–529.
Hardin, B. O., and Drnevich, V. P. (1972). “Shear modulus and damping in soils.” J. Soil Mech. and Found. Div., 98, SM 7, 667–692.
Ray, R. P., and Woods, R. D. (1988). “Modulus and damping due to uniform and variable cyclic loading.” J. Geotech. Engrg., 114(8), 861–876.
Seed, H. B., and Idriss, I. M. (1970). “Soil moduli and damping factors for dynamic response analysis.” Rep. No. EERC 70-10, Univ. of California, Berkeley, Calif.
Talsuoka, F., Iwasaki, T., and Takagi, Y. (1978). “Hysteretic damping of sand under cyclic loading and its relation to shear modulus.” J. Soils Foundations, 18(2), 25–40.
Vucetic, M., and Dobry, R. (1991). “Effect of soil plasticity on cyclic response.” J. Geotech. Engrg., 117(1), 89–107.
Zhang, X. J. (1994). “Effect of coupled motions on the dynamic properties of sands.” Thesis presented to the Univ. of Maryland, at College Park, Md. in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
Zhang, X. J., and Aggour, M. S. (1996). “Damping determination of sands under different loadings.” Electronic Proc., 11th World Conf. on Earthquake Engineering, Elsevier Science, London.
Zhang, X. J., and Aggour, M. S. (2004). “Effects of coupled vibrations on the dynamic properties of sands.” Electronic Proc., 13th World Conf. on Earthquake Engineering, Mira Digital Publishing, St. Louis.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Dec 30, 2004
Accepted: Jun 23, 2006
Published online: Dec 1, 2006
Published in print: Dec 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.