Discrete Element Method Evaluation of Granular Crushing Under Direct Shear Test Conditions
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 131, Issue 10
Abstract
Granular materials forming part of civil engineering structures are subjected to both static and dynamic loads. As a result of these loads, particle crushing occurs. This study focuses on the evolution of crushing in a simulated granular material subjected to a direct shear test. It was found that the discrete element method (DEM) can be used to visualize and understand the evolution of crushing experienced by a granular material during this test. Even though DEM does not normally consider particle breakage, it is possible to simulate crushing by replacing one particle that has failed in tension with a combination of many particles of different sizes. One simulation indicated that crushing did not develop uniformly throughout the sample, and the sample tended to achieve a fractal distribution of particle sizes. The changes in other properties of the simulated granular material such as porosity and shear strength were also recorded, analyzed, and compared to the changes produced during another simulation where crushing was not a predominant feature.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The work described herein was supported by Grant No. NSFCMS-0301815 to the University of Pittsburgh from the National Science Foundation, Washington, D.C. This support is gratefully acknowledged.
References
American Society for Testing and Materials (ASTM). (1995). “Standard test method for splitting tensile strength of intact rock core specimens.” International, Designation: D3967-95a, Philadelphia, Pa.
Billam, J. (1971). “Some aspects of the behaviour of granular materials at high pressures.” Stress–Strain Behaviour of Soils: Proc., Roscoe Memorial Symp., Cambridge Univ., Cambridge, United Kingdom, 69–80.
Cheng, Y. P., Nakata, Y., and Bolton, M. D. (2003). “Discrete element simulation of crushable soil.” Geotechnique, 53(7), 633–641.
Coop, M. R., Sorensen, K. K., Bodas Freitas, T., and Georgoutsos, G. (2004). “Particle breakage during shearing of carbonate sand.” Geotechnique, 54(3), 157–163.
Cundall, P. A., and Strack, O. D. L. (1979). “A discrete numerical model for granular assemblies.” Geotechnique, 29(1), 47–65.
Feda, J. (2002). “Notes on the effect of grain crushing on the granular soil behavior.” Eng. Geol. (Amsterdam), 63, 93–98.
Fragaszy, R. J., and Voss, M. E. (1986). “Undrained compression behavior of sand.” J. Geotech. Eng., 112(3), 334–347.
Hagerty, M. M., Hite, D. R., Ulrich, C. R., and Hagerty, D. J. (1993). “One dimensional high pressure compression of granular media.” J. Geotech. Eng., 119(1), 1–18.
Hardin, B. O. (1985). “Crushing of soil particles.” J. Geotech. Eng., 111(10), 1177–1192.
Itasca Consulting Group, Inc. (2002a). (Particle Flow Code in Two Dimensions) version 3.0: FISH in PFC, Minneapolis.
Itasca Consulting Group, Inc. (2002b). (Particle Flow Code in Two Dimensions) version 3.0: Theory and Background, Sections 1 and 2, Minneapolis.
Jensen, R. P., Plesha, M. E., Edil, T. B., Bosscher, P. J., and Kahla, N. B. (2001). “DEM simulation of particle damage in granular media—structure interfaces.” Int. J. Geomech., 1(1), 21–40.
Lade, P. V., Yamamuro, J. A., and Bopp, P. A. (1996). “Significance of particle crushing in granular materials.” J. Geotech. Eng., 122(4), 309–316.
Lee, K. L., and Farhoomand, I. (1967). “Compressibility and crushing of granular soil in anisotropic triaxial compression.” Can. Geotech. J., 4(1), 68–86.
McDowell, G. R., and Bolton, M. D. (1998). “On the micromechanics of crushable aggregates.” Geotechnique, 48(5), 667–679.
McDowell, G. R., and Daniell, C. M. (2001). “Fractal compression of soil.” Geotechnique, 51(2), 173–176.
McDowell, G. R., and Harireche, O. (2002). “Discrete element modelling of yielding and normal compression of sand.” Geotechnique, 52(4), 299–304.
Nakata, Y., Hyodo, M., Hyde, A. F. L., Kato, Y., and Murata, H. (2001a). “Microscopic particle crushing of sand subjected to high pressure one-dimensional compression.” Soils Found., 41(1), 69–82.
Nakata, Y., Kato, Y., Hyodo, M., Hyde, A. F. L., and Murata, H. (2001b). “One-dimensional compression behavior of uniformly graded sand related to single particle crushing strength.” Soils Found., 41(2), 39–51.
Takei, M., Kusakabe, O., and Hayashi, T. (2001). “Time-dependent behavior of crushable materials in one-dimensional compression tests.” Soils Found., 41(1), 97–121.
Tsoungui, O., Vallet, D., and Charmet, J. C. (1999). “Numerical model of crushing of grains inside two-dimensional granular materials.” Powder Technol., 105, 190–198.
Turcotte, D. L. (1986). “Fractals and fragmentation.” J. Geophys. Res., 91(B2), 1921–1926.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Aug 6, 2004
Accepted: Feb 10, 2005
Published online: Oct 1, 2005
Published in print: Oct 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.