Probabilistic Slope Stability Analysis by Finite Elements
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 130, Issue 5
Abstract
In this paper we investigate the probability of failure of a cohesive slope using both simple and more advanced probabilistic analysis tools. The influence of local averaging on the probability of failure of a test problem is thoroughly investigated. In the simple approach, classical slope stability analysis techniques are used, and the shear strength is treated as a single random variable. The advanced method, called the random finite-element method (RFEM), uses elastoplasticity combined with random field theory. The RFEM method is shown to offer many advantages over traditional probabilistic slope stability techniques, because it enables slope failure to develop naturally by “seeking out” the most critical mechanism. Of particular importance in this work is the conclusion that simplified probabilistic analysis, in which spatial variability is ignored by assuming perfect correlation, can lead to unconservative estimates of the probability of failure. This contradicts the findings of other investigators who used classical slope stability analysis tools.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alonso, E. E.(1976). “Risk analysis of slopes and its application to slopes in Canadian sensitive clays.” Geotechnique, 26, 453–472.
Bishop, A. W.(1955). “The use of the slip circle in the stability analysis of slopes.” Geotechnique, 5(1), 7–17.
Chowdhury, R. N., and Tang, W. H. (1987). “Comparison of risk models for slopes.” Proc., 5th Int. Conf. on Applications of Statistics and Probability in Soil and Structural Engineering, 2, 863–869.
Christian, J. T. (1996). “Reliability methods for stability of existing slopes.” Uncertainty in the geologic environment: From theory to practice, Geotechnical Special Publication No. 58, C. D. Shackelford et al., eds., ASCE, New York, 409–418.
Christian, J. T., Ladd, C. C., and Baecher, G. B.(1994). “Reliability applied to slope stability analysis.” J. Geotech. Eng., 120(12), 2180–2207.
D’Andrea, R. A., and Sangrey, D. A.(1982). “Safety factors for probabilistic slope design.” J. Geotech. Eng. Div., Am. Soc. Civ. Eng., 108(9), 1108–1118.
Duncan, J. M.(2000). “Factors of safety and reliability in geotechnical engineering.” J. Geotech. Geoenviron. Eng., 126(4), 307–316.
El-Ramly, H., Morgenstern, N. R., and Cruden, D. M.(2002). “Probabilistic slope stability analysis for practice.” Can. Geotech. J., 39, 665–683.
Fenton, G. A., and Griffiths, D. V.(1993). “Statistics of flow through a simple bounded stochastic medium.” Water Resour. Res., 29(6), 1825–1830.
Griffiths, D. V., and Fenton, G. A. (2000). “Influence of soil strength spatial variability on the stability of an undrained clay slope by finite elements.” Slope Stability 2000, Proc., GeoDenver 2000, 184–193, ASCE, New York.
Griffiths, D. V., and Fenton, G. A.(2001). “Bearing capacity of spatially random soil: The undrained clay Prandtl problem revisited.” Geotechnique, 51(4), 351–359.
Griffiths, D. V., and Lane, P. A.(1999). “Slope stability analysis by finite elements.” Geotechnique, 49(3), 387–403.
Fenton, G. A., and Vanmarcke, E. H.(1990). “Simulation of random fields via local average subdivision.” J. Eng. Mech., 116(8), 1733–1749.
Hassan, A. M., and Wolff, T. F. (2000). “Effect of deterministic and probabilistic models on slope reliability index.” Slope Stability 2000, Geotechnical Special Publication No. 101, D. V. Griffiths et al., eds., ASCE, New York, 194–208.
Kulhawy, F. H., Roth, M. J. S., and Grigoriu, M. D. (1991). “Some statistical evaluations of geotechnical properties.” Proc., ICASP6, 6th Int. Conf. on Applied Statistics Probability in Civil Engineering.
Lacasse, S. (1994). “Reliability and probabilistic methods.” Proc., 13th Int. Conf. on Soil Mechanics Foundation Engineering, 225–227.
Lacasse, S., and Nadim, F. (1996). “Uncertainties in characterising soil properties.” Geotechnical Special Publication No. 58, Proc., Uncertainity ’96, C. D. Shackelford et al., eds., ASCE, New York, 49–75.
Lee, I. K., White, W., and Ingles, O. G. (1983). Geotechnical engineering, Pitman, London.
Li, K. S., and Lumb, P.(1987). “Probabilistic design of slopes.” Can. Geotech. J., 24, 520–531.
Matsuo, M., and Kuroda, K.(1974). “Probabilistic approach to the design of embankments.” Soils Found., 14(1), 1–17.
Mostyn, G. R., and Li, K. S. (1993). “Probabilistic slope stability—State of play.” Proc., Conf. on Probabilistic Methods in Geotechnical Engineering, K. S. Li and S.-C. R. Lo, eds., 89–110, Balkema, Rotterdam, The Netherlands.
Mostyn, G. R., and Soo, S. (1992). “The effect of autocorrelation on the probability of failure of slopes.” 6th Australia, New Zealand Conf. on Geomechanics: Geotechnical Risk, 542–546.
Paice, G. M. (1997). “Finite element analysis of stochastic soils.” PhD thesis, Univ. of Manchester, Manchester, U.K.
Smith, I. M., and Griffiths, D. V. (1998). Programming the finite element method, 3rd Ed., Wiley, Chichester, U.K.
Tang, W. H., Yucemen, M. S., and Ang, A. H. S.(1976). “Probability-based short-term design of slopes.” Can. Geotech. J., 13, 201–215.
Taylor, D. W.(1937). “Stability of earth slopes.” J. Boston Soc. Civ. Eng., 24, 197–246.
Vanmarcke, E. H.(1977). “Reliability of earth slopes.” J. Geotech. Eng. Div., Am. Soc. Civ. Eng., 103(11), 1247–1265.
Vanmarcke, E. H. (1984). Random fields: Analysis and synthesis, MIT Press, Cambridge, Mass.
Whitman, R. V.(2000). “Organizing and evaluating uncertainty in geotechnical engineering.” J. Geotech. Geoenviron. Eng., 126(7), 583–593.
Wolff, T. F. (1996). “Probabilistic slope stability in theory and practice.” Uncertainty in the geologic environment: From theory to practice, Geotechnical Special Publication No. 58, C. D. Shackelford et al., eds., ASCE, New York, 419–433.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Dec 31, 2002
Accepted: Jun 9, 2003
Published online: Apr 15, 2004
Published in print: May 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.