Pressure-Dependent Elasticity and Energy Conservation in Elastoplastic Models for Soils
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 130, Issue 1
Abstract
This paper presents a study on the consequences of combining energy conservative or non-conservative elasticity within a plasticity framework. Toward this end, a versatile energy potential function is first presented and examined. It is shown to cover a wide range of existing empirical relations for pressure-dependent stiffness of soils. Utilization of these functions within hyperplastic constitutive framework allows for the resulting models to satisfy the Law of Energy Conservation for both elastic and plastic components of soil behavior. Apart from the theoretical rigor, a very important result of this approach is that it automatically implies stress-induced cross-anisotropy of the elastic component of soil behavior and dilatancy term occurs due to shear modulus dependency on pressure. Proper modeling of these phenomena, normally neglected by conventional hypoelastic-plastic models, has been shown to have a significant effect on the accuracy of the model predictions of undrained behavior of overconsolidated clays both in laboratory tests and in tunnel excavation problem.
Get full access to this article
View all available purchase options and get full access to this article.
References
Addenbrooke, T. I., Potts, D. M., and Puzrin, A. M.(1997). “The influence of pre-failure soil stiffness on the numerical analysis of tunnel construction.” Geotechnique, 47(3), 693–712.
Atkinson, J. H.(2000). “Non-linear soil stiffness in routine design.” Geotechnique, 50(5), 487–508.
Atkinson, J. H., and Richardson, D.(1985). “Elasticity and normality in soil—Experimental examinations.” Geotechnique, 35(4), 443–449.
Borja, R. I., Tamagnini, C., and Amorosi, A.(1997). “Coupling plasticity and energy-conserving elasticity models for clays.” J. Geotech. Geoenviron. Eng., 123(10), 948–957.
Boyce, H. R. (1980). “A non-linear model for the elastic behaviour of granular materials under repeated loading.” Proc., Int. Symposium on Soils under Cyclic and Transient Loading, January 7–11, Swansea, UK, 285–294.
Butterfield, R.(1979). “A natural compression law for soils.” Geotechnique, 29(4), 469–480.
Collins, I. F., and Houlsby, G. T.(1997). “Application of thermomechanical principles to the modeling of geomaterials.” Proc. R. Soc. London, Ser. A, 453, 1975–2001.
Einav, I. (2002). “Applications of thermodynamical approaches to mechanics of soils.” PhD dissertation, Technion-Israel Institute of Technology, Haifa, Israel.
Einav, I., and Puzrin, A. M.(2002). “Discussion on ‘Stress rate-elastic stretching relations in elastoplastic constitutive equations for soils’ by K. Hashiguchi and I. F. Collins.” Soils Found., 42(1), 159–160.
Graham, J., and Houlsby, G. T.(1983). “Anisotropic elasticity of a natural clay.” Geotechnique, 33(2), 165–180.
Halphen, B., and Nguyen, Q. S.(1975). “Sur les matériaux standards généralizés.” J. Mec., 14, 39–63.
Hardin, B. O. (1978). “The nature of stress-strain behaviour for soils.” Proc., Geotechnical Division Special Conf. on Earthquake Engineering and Soil Dynamics, ASCE, Pasdena, Calif., 1, 3–39.
Hashiguchi, K.(1995). “On the linear relation of V-ln p and ln v-ln p for isotropic consolidation of soils.” Int. J. Numer. Analyt. Meth. Geomech., 19, 367–376.
Hashiguchi, K., and Collins, I. F.(2001). “Stress rate-elastic stretching relations in elastoplastic constitutive equations for soils.” Soils Found., 41(2), 77–78.
Hoque, E., and Tatsuoka, F.(1998). “Anisotropy in elastic deformation of granular materials.” Soils Found., 38(1), 163–179.
Houlsby, G. T. (1981). “A study of plasticity theories and their applicability to soils.” PhD thesis, Univ. of Cambridge, England.
Houlsby, G. T.(1985). “The use of a variable shear modulus in elastic-plastic models for clays.” Comput. Geotech., 1, 3–13.
Houlsby, G. T., and Puzrin, A. M.(2000). “A thermomechanical framework for constitutive models for rate-independent dissipative materials.” Int. J. Plast., 16(9), 1017–1047.
Houlsby, G. T., and Wroth, C. P.(1991). “The variation of shear modulus of a clay with pressure and overconsolidation ratio.” Soils Found., 31(3), 138–143.
Hueckel, T., Tutumluer, E., and Pellegrini, R.(1992). “A note on non-linear elasticity of isotropic overconsolidated clays.” Int. J. Numer. Analyt. Meth. Geomech., 16, 603–618.
ITASCA. (2000). FLAC user’s manual., Itasca Consulting Group Inc., Minneapolis.
Jovicic, V., and Coop, M. R.(1997). “Stiffness of coarse-grained soils at small strains.” Geotechnique, 47(3), 545–561.
Ko, H. Y., and Masson, R. (1976). “Nonlinear characterization and analysis of sand.” 2nd Int. Conf. on Numerical Methods in Geomechanics, C. S. Desai, ed., ASCE, Blacksburg, Va., 294–305.
Lee, K. M., and Rowe, R. K.(1989). “Deformation caused by surface loading and tunneling: The role of elastic anisotropy.” Geotechnique, 39(1), 125–140.
Lings, M. L., Pennington, D. S., and Nash, D. F. T.(2000). “Anisotropic stiffness parameters and their measurement in a stiff natural clay.” Geotechnique, 50(2), 109–125.
Lo Presti, D. C. F., and O’Neill, D. A. (1991). “Laboratory investigation of small strain modulus anisotropy in sands.” Proc., ISOCCTI, Clarkson Univ., Potsdam, N.Y., Huang, ed., Elsevier, New York, 213–224.
Love, A. E. H. (1927). A treatise on the mathematical theory of elasticity, Cambridge Univ., 4th Ed., Cambridge, England.
Maier, G., and Hueckel, T. (1977). “Nonassociated and coupled flow rules of elastoplasticity for geomechanical media.” Proc., 9th Int. Conf. Soil Mechanics Foundation Engineering, Tokyo, Specially session 7, Constitutive Relations for Soils, 129–142.
Martin, J. B., and Nappi, A.(1990). “An internal variable formulation for perfectly plastic and linear hardening relations in plasticity.” Eur. J. Mech. A/Solids, 9(2), 107–131.
Maugin, G. A. (1992). The thermomechanics of plasticity and fracture, Cambridge Univ., Cambridge, England.
Puzrin, A. M., and Houlsby, G. T.(2001a). “A thermomechanical framework for rate-independent dissipative materials with internal functions.” Int. J. Plast., 17, 1147–1165.
Puzrin, A. M., and Houlsby, G. T.(2001b). “Fundamentals of kinematic hardening hyperplasticity.” Int. J. Solids Struct., 38, 3771–3794.
Rampello, S., Viggiani, G. M. B., and Amorosi, A.(1997). “Small-strain stiffness of reconstituted clay compressed along constant triaxial effective stress ratio paths.” Geotechnique, 47(3), 475–489.
Stallebrass, S. E., and Taylor, R. N.(1997). “The development and evaluation of a constitutive model for the prediction of ground movements in overconsolidated clay.” Geotechnique, 47(2), 235–253.
Stokoe, K. H., II, Lee, J. N. K., and Lee, S. H. H. (1991). “Characterization of soil in calibration chambers with seismic waves.” Proc., ISOCCTI, Clarkson Univ., Potsdam, N.Y., Huang, ed., Vol. 2, Elsevier, New York, 363–376.
Truesdell, C. (1965). “Hypo-elasticity.” J. Rational Mech. Anal., 4, 83–133.
Ziegler, H. (1977, 2nd Edition: 1983). An introduction to thermomechanics, North Holland, Amsterdam.
Zytynski, M., Randolph, M. F., Nova, R., and Wroth, C. P.(1978). “On modelling the unloading-reloading behaviour of soils.” Int. J. Numer. Analyt. Meth. Geomech., 2, 87–93.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Feb 5, 2002
Accepted: Feb 22, 2003
Published online: Dec 15, 2003
Published in print: Jan 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.