Inclined Plane Studies of the Newmark Sliding Block Procedure
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 129, Issue 8
Abstract
This study considers the shaking-induced displacement and dynamic response of a rigid block and deformable columns of soil on an inclined plane. This work demonstrates that because of the coupled dynamic response and sliding of earth masses, actual deformations in these systems can vary significantly from those computed in a rigid block analysis proposed by Newmark in 1965. The rigid sliding block procedure was found to be generally unconservative when the predominant frequency of the input motion is somewhat less or about equal to the natural frequency of the sliding mass Conversely, the sliding block procedure is generally conservative when the predominant frequency of the input motion exceeds the natural frequency of the mass While it was found that sliding surfaces might limit transmission of energy, high inertial forces can, nonetheless, develop in a sliding mass because of its stick–slip dynamic response. This was found to occur in many of the soil column tests when accelerations in excess of the yield acceleration were measured at the base of the sliding mass. Based on the results of this study, recommendations are made to aid practitioners in selecting an appropriate seismic slope deformation procedure.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bray, J. D., Rathje, E. M., Augello, A. J., and Merry, S. M.(1998). “Simplified seismic design procedure for lined solid-waste landfills.” Geosynthet. Int., 5(1-2), 203–235.
Chopra, A. K. (1995). Dynamics of structures, Prentice-Hall, Englewood Cliffs, N.J.
Cooley, C. A., and Tukey, J. W.(1965). “An algorithm for the machine computation of complex Fourier series.” Math. Comput., 62(4), 297–301.
Finn, W. D. L., Ledbetter, R. H., and Marcuson, W. F., III. (1997). “North American practice for evaluating the seismic safety of embankment dams.” Proc., 1st Int. Conf. on Earthquake. Geotechnical Engineering, A. A. Balkema, Rotterdam, The Netherlands, 1227–1251.
Franklin, A. G., and Chang, F. K. (1977). “Earthquake resistance of earth and rockfill dams.” Misc. Paper S-71-17, U. S. Army Waterway Experiment Station, Vicksburg, Miss.
GeoSyntec. (1996). User’s manual for , Huntington Beach, Calif.
Goodman, R. E., and Seed, H. B. (1965). “Displacements of slopes in cohesionless materials during earthquakes,” Rep. No. H21, Inst. of Trans. and Traffic Engineering, Univ. of Calif., Berkeley, Calif.
Houston, S. L., Houston, W. N., and Padilla, J. M.(1987). “Microcomputer-aided evaluation of earthquake-induced permanent slope deformations.” Microcomput. Civ. Eng., 2(3), 207–222.
Jibson, R. W. (1993). “Predicting earthquake induced landslide displacements using Newmark’s sliding block analysis.” Trans. Res. Rec., Paper No. 930,182, 72nd annual meeting, TRB.
Jibson, R. W., Harp, E. L., and Michael, J. A. (1998). “A method for producing digital probabilistic seismic landslide hazard maps: An example from the Los Angeles, Calif., area.” USGS, Open-File Rep., 98–113.
Kramer, S. L., and Smith, M. W.(1997). “Modified Newmark model for seismic displacements of compliant slopes.” J. Geotech. Geoenviron. Eng., 123(7), 635–644.
Lemos, L. J. L., and Coelho, P. A. L. F. (1991). “Displacements of slopes under earthquake loading.” Proc., 2nd Int. Conf. Rec. Adv. in Geotech. Earthquake Eng. and Soil Dyn., St. Louis.
Lin, J-S., and Whitman, R. V.(1983). “Decoupling approximation to the evaluation of earthquake induced plastic slip in earth dams.” Earthquake Eng. Struct. Dyn., 11, 667–678.
Lin, J.-S., and Whitman, R. V.(1986). “Earthquake induced displacements of sliding blocks.” J. Geotech. Eng., 112(1), 44–59.
Makdisi, F. I., and Seed, H. B.(1978). “Simplified procedure for estimating dam and embankment earthquake-induced deformations.” J. Geotech. Eng., 104(7), 1427–1434.
Matasovic, N., Kavazanjian, E., and Yan, L. (1997). “Newmark deformation analysis with degrading yield acceleration.” Proc., Geosyn. ’97, Long Beach, Calif.
Nadim, F., and Whitman, R. V.(1983). “Seismically induced movement of retaining walls.” J. Geotech. Eng., 109(7), 915–931.
Newmark, N. M. (1963). “Earthquake effects on dams and embankments.” Presented at the October 7–11, ASCE Struct. Eng. Conf., San Francisco, October 7–11.
Newmark, N. M.(1965). “Effects of earthquakes on dams and embankments.” Geotechnique, 15(2), 139–160.
Pyke, R., and Beikae, M. (1991). TNMN, Tagasoft, Lafayette, Calif.
Rathje, E. M., and Bray, J. D.(1999). “An examination of simplified earthquake-induced displacement procedures for earth structures.” Can. Geotech. J., 36(1), 72–87.
Rathje, E. M, and Bray, J. D.(2000). “Nonlinear coupled seismic sliding analysis of earth structures.” J. Geotech. Geoenviron. Eng., 126(11), 1002–1014.
Safak, E.(1997). “Models and methods to characterize site amplification from a pair of records.” Earthquake Spectra, 13(1), 97–129.
Santamarina, J. C., and Fratta, D. (1998). Introduction to discrete signals and inverse problems in civil engineering, ASCE, Reston, Va.
Sarma, S. K.(1975). “Seismic stability of earth dams and embankments.” Geotechnique, 25(4), 743–761.
Schnabel. P. B. (1973). “Effects of local geology and distance from source on earthquake ground motions.” PhD thesis, Univ. of California, Berkeley, Calif.
Taylor, D. W. (1953). Letter to South Pacific Division, Corps of Engineers, San Francisco, 14 April.
Tika-Vassilikos, T. E., Sarma, S. K., and Ambraseys, N. N.(1993). “Seismic displacement on shear surfaces in cohesive soils.” Earthquake Eng. Struct. Dyn., 22, 709–721.
Vucetic, M., and Dobry, R.(1991). “Effect of soil plasticity on cyclic response.” J. Geotech. Eng., 117(1), 89–107.
Wartman, J. (1999). “Physical model studies of seismically induced deformation in slopes.” PhD thesis, Univ. of California, Berkeley, Calif., 〈http://www.drexel.edu/academics/engineering/faculty.asp?ID=136〉.
Wartman, J., and Riemer, M. F. (2002). “The use of fly ash to alter the geotechnical properties of artificial model clay.” Proc., 1st Int. Conf. on Physical Modelling in Geotechnics, St. John’s, Canada.
Yan, L. (1991). “Seismic deformation analyses of earth dams: A simplified method.” Soil Mech. Lab. Rep. No. SML 91-01, Cal. Inst. of Tech.
Yan, L., Matasovic, N., and Kavazanjian, E., Jr. (1996). “Seismic response of rigid block on inclined plane to vertical and horizontal ground motions acting simultaneously.” Proc., 11th ASCE Engineering Mech. Conf., Ft. Lauderdale, Fla., 1111–1113.
Yegian, M. K., Marciano, E. A., and Ghahraman, V. G.(1991). “Earthquake-induced permanent deformations: Probabilistic approach.” J. Geotech. Eng., 117(1), 35–50.
Yegian, M. K., and Kadakal, U.(1998). “Geosynthetic interface behavior under dynamic loads.” Geosynthet. Int., 5(1), 1–16.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Oct 29, 2001
Accepted: Oct 22, 2002
Published online: Jul 15, 2003
Published in print: Aug 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.