Three-Dimensional Analysis of Nonhomogeneous Slopes
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 129, Issue 2
Abstract
Presented is a method of three-dimensional slope stability analysis for homogeneous and nonhomogeneous symmetrical slopes based on the upper-bound theorem of the limit analysis approach. A rigid-block translational toe, above-the-toe or below-the-toe collapse mechanism is considered, with energy dissipation taking place along planar velocity discontinuities. The approach can be considered as a modification and extension of the procedure proposed by Michalowski in 1989. An effective iterative algorithm is applied to find the optimum (least) upper bound in constrained or unconstrained problems. The present procedure removes some essential limitations of limit analysis methods in two- and three-dimensional stability analysis of nonhomogeneous slopes.
Get full access to this article
View all available purchase options and get full access to this article.
References
Askari, F. (1999). “A limit analysis method for three dimensional seismic stability of nonhomogeneous slopes.” PhD thesis, Faculty of Engineering, University of Tehran, Tehran, Iran.
Baligh, M. M., and Azzouz, A. S.(1975). “End effects on stability of cohesive slopes.” J. Geotech. Eng. Div., Am. Soc. Civ. Eng., 101(11), 1105–1117.
Chen, R. H., and Chameau, J. L.(1983). “Three-dimensional limit equilibrium analysis of slopes.” Geotechnique, 33(1), 31–40.
Chen, W. F. (1975). Limit analysis and soil plasticity, Elsevier, Amsterdam, Netherlands.
Chen, W. F., and Liu, X. L. (1990). Limit analysis in soil mechanics, Elsevier, Amsterdam, Netherlands.
Davis, E. H. (1968). “Theories of plasticity and the failure of the soil masses.” Soil mechanics: Selected topics, I. K. Lee, ed., Butterworths, London.
Duncan, J. M.(1996). “State of the art: Limit equilibrium and finite-element analysis of slopes.” J. Geotech. Eng., 122(7), 577–596.
Giger, M. W., and Krizek, R. J.(1975). “Stability analysis of vertical cut with variable corner angle.” Soils Found., 15(2), 63–71.
Giger, M. W., and Krizek, R. J.(1976). “Stability of vertical corner cut with concentrated surcharge load.” J. Geotech. Eng. Div., Am. Soc. Civ. Eng., 102(1), 31–40.
Hovland, H. J.(1977). “Three-dimensional slope stability analysis method.” J. Geotech. Eng. Div., Am. Soc. Civ. Eng., 103(9), 971–986.
Leshchinsky, D., and Huang, C.(1992). “Generalized three dimensional slope stability analysis.” J. Geotech. Eng., 118(11), 1748–1764.
Michalowski, R. L.(1989). “Three dimensional analysis of locally loaded slopes.” Geotechnique, 39(1), 27–38.
Michalowski, R. L.(1995). “Slope stability analysis: a kinematic approach.” Geotechnique, 45(2), 283–293.
Michalowski, R. L., and Shi, L.(1995). “Bearing capacity of footings over two-layer foundation soils.” J. Geotech. Eng., 121(5), 421–428.
Salençon, J. (1974). Application of the theory of plasticity in soil mechanics, R. W. Lewis and H. Virlogeux, translators, Wiley, New York.
Salençon, J. (1984). Calcul à la rupture et analyse limite, Presses de l’Ecole Nationale des Ponts et Chaussées, Paris.
Ugai, K.(1985). “Three-dimensional slope stability analysis of vertical cohesive slopes.” Soils Found., 25(3), 41–48.
Yu, H. S., Salgado, R., Sloan, S. W., and Kim, J. M.(1998). “Limit analysis versus limit equilibrium for slope stability.” J. Geotech. Eng., 124(1), 1–11.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Nov 19, 1999
Accepted: Feb 27, 2002
Published online: Jan 15, 2003
Published in print: Feb 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.