Simplified Trial Wedge Method for Soil Nailed Wall Analysis
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 129, Issue 2
Abstract
This paper presents a new approach that allows soil nailed walls to be analyzed using a trial wedge method. Most soil nailed wall analysis methods are rooted in traditional slope stability solutions with curvilinear or bilinear slip surfaces. This has led to limited access to these methods due to the cost of commercial software. In addition, there are at least two well-documented test walls brought to failure that indicated evidence of relatively steep, approximately linear slip surfaces instead of the more complex surfaces assumed by most software packages. The simplified trial wedge method is intended as a relatively simple and inexpensive method for preliminary or supplemental design calculations for soil nailed walls. The method stems from the existing Federal Highway Administration analysis guidelines. Procedures are outlined for implementing the trial wedge method using a spreadsheet-based approach. The method is applied to two test walls that were intentionally brought to failure, the Amherst Test Wall in clay, and the Clouterre Test Wall No. 1 in sand. In each case, the trial wedge analysis produces results consistent with the failure mode of the wall.
Get full access to this article
View all available purchase options and get full access to this article.
References
Benoit, J. and de Alba, P. (1993). “Catalog of national geotechnical experimentation sites.” Report to National Science Foundation (NSF) and Federal Highway Administration (FHWA), Washington, D.C., 247.
Das, B. M. (1999). Principles of foundation engineering, 4th Ed., PWS Publishers, Pacific Grove, Calif., 862.
Federal Highway Administration (FHWA). (1993). “Recommendations Clouterre 1991 (english translation).” Report on the French National Project Clouterre, Rep. No. FHWA-SA-93-026, Washington, D.C., 321.
Federal Highway Administration (FHWA). (1996). “Manual for design and construction monitoring of soil nail walls.” FHWA Rep. No. FHWA-SA-96-069, Washington, D.C., 468.
Jewell, R. A., and Pedley, M. J.(1992). “Analysis for soil reinforcement with bending stiffness.” J. Geotech. Eng., 118(10), 1505–1528.
Juran, I., Baudrand, G., Farrag, K., and Elias, V.(1990). “Kinematical limit analysis for design of soil-nailed structures.” J. Geotech. Eng., 116(1), 54–72.
Oral, T., and Sheahan, T. C. (1998). “The use of soil nails in soft clays.” Design and construction of earth retaining systems, R. J. Finno, Y. Hashash, C. L. Ho, and B. P. Sweeney, eds., Geotechnical Special Publication No. 83, ASCE, Reston, Va., 26–40.
Plumelle, C., Schlosser, F., Delage, P., and Knochenmus, G. (1990). “French national research project on soil nailing: Clouterre.” Design and performance of earth retaining structures, P. C. Lambe and L. A. Hansen, eds., Geotechnical Special Publication No. 25, ASCE, Reston, Va., 660–675.
Sheahan, T. C. (2000). “A field study of soil nails in clay at the University of Massachusetts—Amhurst National Geotechnical Experimentation Site,” National geotechnical experimentation sites, J. Benoı⁁t and A. J. Lutenegger, eds., Geotechnical Special Publication No. 93, ASCE, Reston, Va., 250–263.
Shen, C. K., Bang, S., and Hermann, L. R.(1981). “Ground movement analysis of earth support system.” J. Geotech. Eng. Div., Am. Soc. Civ. Eng., 107(12), 1609–1624.
Stocker, M. F., Korber, G. W., Gassler, G., and Gudehus, G. (1979). “Soil nailing.” Proc., Conference on Soil Reinforcement, Paris, 2:469–474.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Aug 10, 2001
Accepted: Jun 26, 2002
Published online: Jan 15, 2003
Published in print: Feb 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.