Passive Earth Pressure with Critical State Concept
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 128, Issue 8
Abstract
This paper presents experimental data of earth pressure acting against a vertical rigid wall, which moved toward a mass of dry sand. The backfill had been placed in lifts to achieve relative densities of 38, 63, and 80%. The instrumented retaining-wall facility at National Chiao Tung University in Taiwan was used to investigate the effects of soil density on the development of earth pressure. Based on the experimental data, it has been found that the Coulomb and Terzaghi solutions calculated with the peak internal friction angle significantly overestimated the ultimate passive thrust for the retaining wall filled with dense sand. As the wall movement S exceeded 12% of the wall height H, the passive earth thrust would reach a constant value, regardless of the initial density of backfill. Under such a large wall movement, soils along the rupture surface had reached the critical state, and the shearing strength on the surface could be properly represented with the residual internal-friction angle. The ultimate passive earth pressure was successfully estimated by adopting the critical state concept to either Terzaghi or Coulomb theory.
Get full access to this article
View all available purchase options and get full access to this article.
References
Brinch-Hansen, J. (1953). Earth pressure calculation, Danish Technical Press, Copenhagen, Denmark.
Caquot, A., and Kerisel, J. (1948), Tables for the calculation of passive pressure, active pressure, and bearing capacity of foundations, Gauthier-Villars, Paris.
Casagrande, A. (1936). “Characteristics of cohesionless soils affecting the stability of slopes and earth fills.” J. Boston Civ. Eng., January, reprint in Contributions to Soil Mechanics, 1925–1940, ASCE, 257–276.
Das, B. M. (1990). Principles of foundation engineering, 2nd Ed., PWS-Kent, Boston.
Day, R. W.(1998). “Discussion of ‘earth pressure with sloping backfill,’ ” J. Geotech. Geoenviron. Eng., 124(11), 1152–1153.
Duncan, J. M., and Mokwa, R. L.(2001). “Passive earth pressures: theory and tests.” J. Geotech. Geoenviron. Eng., 127(3), 248–257.
Dunnicliff, J. (1988). Geotechnical instrumentation for monitoring field performance, Wiley, New York.
Fang, Y. S., Chen, J. M., and Chen, C. Y.(1997). “Earth pressures with sloping backfill.” J. Geotech. Geoenviron. Eng., 123(3), 250–259.
Fang, Y. S., Chen, T. J., and Wu, B. F.(1994). “Passive earth pressures with various wall movements.” J. Geotech. Eng., 120(8), 1307–1323.
Holtz, R. D. and Kovacs, W. D. (1981). An introduction to geotechnical engineering, Prentice-Hall, Englewood Cliffs, N.J.
Huang, C. C., Cheng, C. Y., Hsia, S. H., and Hsu, S. P. (1994). “Reinforcement stiffness on load-deformation characteristics of reinforcement.” Proc., 5th Int. Conf. on Geotextiles, Geomembranes and Related Products, Singapore, 187–200.
James, R. G., and Bransby, P. L.(1970). “Experimental and theoretical investigations of a passive pressure problem.” Geotechnique, 20(1), 17–37.
Janbu, N. (1957). “Earth pressure and bearing capacity calculations by generalized procedure of slices.” Proc., 4th Int. Conf. on Soil Mechanics and Foundations Engineering, London, 207–212.
Lambe, T. W., and Whitman, R. V. (1969). Soil mechanics, Wiley, New York.
Mackey, R. D., and Kirk, D. P. (1967). “At rest, active and passive earth pressures.” Proc., South East Asian Conf. on Soil Mechanics and Foundations Engineering, Bangkok, 187–199.
Matsuo, M., Kenmochi, S., and Yagi, H.(1978). “Experimental study of retaining wall by field tests.” Soils Found., 18(3), 27–42.
Morgenstern, N. R., and Eisenstein, Z. (1970). “Methods of estimating lateral loads and deformations.” Proc., ASCE Speciality Conf. on Lateral Stresses in the Ground and Design of Earth-Retaining Structures, Ithaca, N.Y., 51–102.
Narain, J., Saran, S., and Nandakumaran, P., (1969). “Model study of passive pressure in sand.’' J. Soil Mech. Found. Div., Am. Soc. Civ. Eng., 95(4), 969–983.
Rowe, P. W., and Peaker, K.(1965). “Passive earth pressure measurements.” Geotechnique, 15(1), 57–78.
Schofield, A. N. (1961). “The development of lateral force of sand against the vertical face of a rotating model foundation.” Proc., 5th Int. Conf. Soil Mechianics, Paris, 479–484.
Sokolovski, V. V. (1960). Statics of soil media, Butterworths, London.
Tatsuoka, F., and Haibara, O.(1985). “Shear resistance between sand and smooth or lubricated surface.” Soils Found., 25(1), 89–98.
Terzaghi, K.(1941). “General wedge theory of earth pressure.” ASCE Trans.,106, 68–80.
Terzaghi, K. and Peck, R. B. (1967). Soil mechanics in engineering practice, 2nd Ed., Wiley, New York.
Terzaghi, K., Peck, R. B., and Mezri, G. (1996). Soil mechanics in engineering practice, 3rd Ed., Wiley, New York.
Uesugi, M., and Kishida, H.(1986). “Influential factors of friction between steel and dry sands,” Soils Found., 26(2), 33–46.
U.S. Navy (1982). “Foundations and earth structures.” NAVFAC Design Manual DM-7.2, Naval Facilities Engineering Command, U.S. Government Printing Office, Washington, D.C.
Wu, B. F. (1992a). “Design and construction of National Chiao Tung University model retaining wall.” MS thesis, National Chiao Tung Univ., Hsinchu, Taiwan.
Wu, J. T. H. (1992b). “Construction and Instrumentation of the Denver walls.” Proc., International Symposium on Geosynthetic Reinforced Soil Retaining Walls, Balkema, Rotterdam, The Netherlands, 21–30.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Mar 28, 2001
Accepted: Dec 21, 2001
Published online: Jul 15, 2002
Published in print: Aug 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.