Seismic Analysis of Segmental Retaining Walls. I: Model Verification
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 127, Issue 9
Abstract
Block-faced geosynthetic reinforced soil retaining walls, referred to as “segmental” retaining walls, have been extensively used in recent years as permanent civil engineering structures. The disjointed concrete facing blocks are held together through interface friction and concrete keys or mechanical connectors. Because of the disjointed nature of the facing blocks, the design of the segmental wall must consider the available shear resistance between these blocks. Connection capacity must also be considered. Of concern also is the permanent deformation of the segmental wall face following an earthquake. This paper describes a finite-element analysis of a model segmental wall subjected to earthquakelike loading generated by a shake table. The finite-element analysis used the computer program DYNA3D. Results from DYNA3D, using a simple model—Ramberg-Osgood model—to simulate the nonlinear hysteretic behavior of soil, are consistent with observed results from laboratory shake table tests on segmental walls.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
American Association of State Highway Transportation Officials (AASHTO). ( 1996). Standard specifications for highway bridges, 16th Ed., Washington, D.C.
2.
Bachus, R. C., Fragaszy, R. J., Jaber, M., Olen, K. L., Yuan, Z., and Jewell, R. ( 1993). “Dynamic response of reinforced soil systems.” Rep. ES L-TR-92-47, Vols. 1 and 2, Engrg. Res. Div., U.S. Department of the Air Force Civil Engineering Support Agency, Tyndall AFB, Fla.
3.
Bathurst, R. J., and Cai, Z. ( 1995). “Pseudo-static seismic analysis of geosynthetic-reinforced segmental retaining walls.” Geosynthetics Int., 2(5), 787–830.
4.
Bathurst, R. J., and Hatami, K. ( 1998). “Seismic response analysis of a geosynthetic reinforced soil retaining wall.” Geosynthetics Int., 5(1-2), 127–166.
5.
Cai, Z., and Bathurst, R. J. ( 1995). “Seismic response analysis of geosynthetic reinforced soil segmental retaining walls by finite element method.” Comp. and Geotechnics, 17(4), 523–546.
6.
Cai, Z., and Bathurst, R. J. ( 1996). “Deterministic sliding block methods for estimating seismic displacements of earth structures.” Soil Dyn. and Earthquake Engrg., 15(4), 255–268.
7.
Collin, J. G., Chouery-Curtis, V. E., and Berg, R. R. ( 1992). “Field observations of reinforced soil structures under seismic loading.” Proc., Int. Symp. on Earth Reinforcement Pract., Earth reinforcement practice, H. Ochiai, N. Yasufuku, and K. Omine, eds., Vol. 1, Balkema, Rotterdam, The Netherlands, 223–228.
8.
Eliahu, U., and Watt, S. ( 1991). “Geogrid-reinforced wall withstands earthquake.” Geotech. Fabrics Rep., 9(2), 8–13.
9.
Fast Lagrangian Analysis of Continua (FLAC). (1995). Version 3.30, Itasca Consulting Group, Inc., Minneapolis.
10.
Federal Highway Administration (FHWA) ( 1996). “Mechanically stabilized earth walls and reinforced soil slopes design and construction guidelines.” FHWA Demonstration Proj. 82, V. Elias and B. R. Christopher, Washington, D.C.
11.
Hallquist, J. O., and Whirley, R. G. ( 1989). “DYNA3D user's manual: nonlinear dynamic analysis of structures in three dimensions.” Rep. UCID-19592, Rev. 5, Lawrence Livermore National Laboratory, Livermore, Calif.
12.
Helwany, S. M. B., Reardon, G., and Wu, J. T. H. ( 1999). “Effects of backfill type on the performance of GRS structures.” Geotextiles and Geomembranes, J. Int. Geotextile Soc., 17(1), 1–16.
13.
Helwany, S. M. B., and McCallen, D. (2001). “Seismic analysis of segmental retaining walls. II: Effects of facing details.”J. Geotech. and Geoenvir. Engrg., ASCE, 127(9), 750–756.
14.
Karpurapu, R., and Bathurst, R. J. ( 1995). “Behavior of geosynthetic reinforced soil retaining walls using the finite element method.” Comp. and Geotechnics, 17(3), 279–299.
15.
Ling, H. I., Cardany, C. P., Sun, L.-X., and Hashimoto, H. ( 2000). “Finite element study of a geosynthetic-reinforced soil retaining wall with concrete-block facing.” Geosynthetic Int., 7(2), 137–162.
16.
Ling, H. I., Leshchinsky, D., and Perry, E. B. ( 1996). “A new concept on seismic design of geosynthetic-reinforced soil structures: Permanent-displacement limit.” Proc., Int. Symp. on Earth Reinforcement Pract., IS-Kyushu '96, Earth Reinforcement Practice, H. Ochiai, N. Yasufuku, and K. Omine, eds., Balkema, Rotterdam, The Netherlands, 797–802.
17.
Ling, H. I., Leshchinsky, D., and Perry, E. B. ( 1997). “Seismic design and performance of geosynthetic reinforced soil structures.” Géotechnique, London, 47(5), 933–952.
18.
Mononobe, N. ( 1929). “Earthquake-proof construction of masonry dams.” Proc., World Engrg. Conf., Vol. 9, 275.
19.
Newmark, N. M. ( 1965). “Effect of earthquakes on dams and embankments.” Géotechnique, London, 15(2), 139–159.
20.
Nishimura, J., Hirai, T., Iwasaki, K., Saito, Y., and Morikshima, M. ( 1996). “Earthquake resistance of geogrid reinforced soil walls based on a study conducted following the southern Hyogo earthquake.” Proc., Int. Symp. on Earth Reinforcement Pract., IS-Kyushu '96, Earth Reinforcement Pract., H. Ochiai, N. Yasufuku, and K. Omine, eds., Balkema, Rotterdam, The Netherlands.
21.
Okabe, S. ( 1924). “General theory on earth pressure and seismic stability of retaining wall and dam.” Doboku Gakkaishi—J. Japan Soc. Civ. Engrg., 10(6), 1277–1323.
22.
Ramakrishnan, S., Budhu, M., and Britto, A. ( 1998). “Laboratory seismic tests on geotextile wrap-faced and geotextile-reinforced segmental retaining walls.” Geosynthetics Int., 5(1-2), 55–71.
23.
Rowe, R. K., and Ho, S. K. ( 1992). “A review of the behavior of reinforced soil walls.” Proc., Int. Symp. on Earth Reinforcement Pract., IS-Kyushu '92, Earth Reinforcement Pract., H. Ochiai, N. Yasufuku, and K. Omine, eds., Balkema, Rotterdam, The Netherlands, 801–830.
24.
Sandri, D. ( 1994). “Retaining walls stand up to the Northridge earthquake.” Geotech. Fabrics Rep., 12(4), 30–31.
25.
Seed, H. B., and Idriss, I. M. ( 1970). “Soil moduli and damping factors for dynamic response analysis.” Rep. No. EERC 75-29, Earthquake Engineering Research Center, University of California, Berkeley, Calif.
26.
Segrestin, P., and Bastick, M. J. ( 1988). “Seismic design of reinforced earth retaining walls—The contribution of finite element analysis.” Proc., Int. Geotechnical Symp. on Theory and Pract. of Earth Reinforcement, IS-Kyushu '88, Theory and Pract. of Earth Reinforcement, T. Yamanouchi, N. Miura, and H. Ochiai, eds., Balkema, Rotterdam, The Netherlands, 577–582.
27.
Simac, M. R. ( 1990). Design methodology for miragrid reinforced soil retaining walls, Mirafi Inc., Pendergrass, Ga.
28.
Simac, M. R., Bathurst, R. J., Berg, R. R., and Lothspeich, S. E. ( 1993). Design manual for segmental retaining walls (modular concrete block retaining wall systems), National Concrete Masonry Association, Herndon, Va.
29.
Su, C.-K. ( 1986). “Investigating soil-geotextile interaction mechanism.” Master's thesis, Dept. of Civ. Engrg., University of Colorado, Denver.
30.
Ueng, T. S., and Chen, J. C. ( 1992). “Computational procedures for determining parameters in Ramberg-Osgood elastoplastic model based on modulus and damping versus strain.” Rep. No. UCRL-ID-111487, Lawrence Livermore National Laboratory, Livermore, Calif.
31.
White, D. M., and Holtz, R. D. ( 1996). “Performance of geosynthetic-reinforced slopes and walls during the Northridge, California earthquake of January 17, 1994.” Proc., Int. Symp. on Earth Reinforcement Pract., IS-Kyushu '96, Earth Reinforcement Pract., H. Ochiai, N. Yasufuku, and K. Omine, eds., Balkema, Rotterdam, The Netherlands,Vol. 2, 965–972.
32.
Yogendrakumar, M., Bathurst, R. J., and Finn, W. D. L. (1992). “Dynamic response analysis of reinforced soil retaining wall.”J. Geotech. Engrg., ASCE, 118(8), 1158–1167.
Information & Authors
Information
Published In
History
Received: Dec 28, 1999
Published online: Sep 1, 2001
Published in print: Sep 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.