Risk Indexing Tool to Assist in Prioritizing Improvements to Embankment Dam Inventories
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 127, Issue 4
Abstract
A risk indexing tool is proposed to assist in the prioritization of maintenance, repair, and evaluation tasks on embankment dams that are generally less than 33 m (100 ft) high and for which there is little or no instrumentation, limited or no information concerning as-built conditions, and little or no information on the performance history. Under such circumstances, there may not be enough information available to perform anything other than an “indexing” type of analysis to assist in prioritization. The risk indexing tool is based upon identifying potential deficiencies in the physical condition of the dam and rating the overall importance of these deficiencies to the safety of the structure. It is meant as an index of risk (indication) and not as a direct measure of risk. Checklists are presented for onsite inspections to determine current physical condition. Condition is defined in terms of a condition function that is based upon a condition indexing scale. Four potential failure modes are considered: (1) overtopping; (2) external erosion; (3) piping; and (4) mass movement (slope instability). Absolute probabilities are specifically not factored into the analysis. Conditional probabilities are estimated for each failure mode using a Bayesian updating procedure based on dam attributes. A simple failure criticality analysis is performed wherein specific changes in physical condition of the dam are considered to contribute to the probability of failure for each mode. From this failure criticality analysis and the conditional probabilities of failure, the relative importance of the various changes in physical condition is determined. The physical condition and the relative importance are then combined for each observable deficiency to form a risk index. These risk indices are used to prioritize expenditures for improvements on the premise that actions to address the most significant physical deficiencies are preferred.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Andersen, G. R., Chouinard, L. E., Bouvier, C. Y., and Abdo, F. ( 1998). “Condition Assessment Methodology for Embankment Dams.” Final Rep. prepared for U.S. Army Corps of Engineers and Hydro-Quebec, Texas A&M University, College Station, Tex.
2.
Andersen, G. R., Chouinard, L. E., Bouvier, C., and Back, W. E. (1999). “Ranking procedure on maintenance tasks for monitoring of embankment dams.”J. Geotech. and Geoenvir. Engrg., ASCE, 125(4), 247–259.
3.
Andersen, G. R., Cox, C. W., Chouinard, L. E., and Hover, W. H. (2001). “Prioritization of ten embankment dams according to physical deficiencies.”J. Geotech. and Geoenvir. Engrg., ASCE, 127(4), 335–345.
4.
Andersen, G. R., and Torrey, V. H., III. ( 1995). “Function-based condition indexing for embankment dams. J. Geotech. Engrg., ASCE, 121(8), 579–588.
5.
Benjamin, J. R., and Cornell, C. A. ( 1970). Probability, statistics, and decision for civil engineers, McGraw-Hill, New York.
6.
Chouinard, L. E., Robichaud, J. G., Blanchette, G., and Gervais, R. ( 1998). “Priority ranking for maintenance activities on embankment dams.” Conf. Can. Dam Safety Assn., Canadian Dam Safety Association, Halifax, Canada, 252–265.
7.
Dascal, O. ( 1991). “Risk of failure and hazard potential classification of Hydro-Quebec dams.” Dam Safety '91, Canadian Dam Safety Association, Edmonton, Alberta, Canada, 287–299.
8.
Federal Emergency Management Agency. ( 1998). Federal Guidelines for Dam Safety: Hazard Potential Classification Systems for Dams, National Dam Safety Program, Interagency Committee Dam Safety, Washington, D.C.
9.
USCOLD Subcommittee of Dam Incidents and Accidents. ( 1988). Lessons from dam incidents. USA-II, ASCE, New York.
Information & Authors
Information
Published In
History
Received: Sep 27, 1999
Published online: Apr 1, 2001
Published in print: Apr 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.