Constitutive Behavior of Geosynthetic Interfaces
This article has a reply.
VIEW THE REPLYPublication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 127, Issue 10
Abstract
New displacement-softening and work-softening models were developed to describe the sliding of geosynthetic interfaces, such as those in landfill liners. The displacement-softening formulation is based on the assumption that strength reduction at the interface can be related to nonrecoverable (plastic) shear displacement. The model uses three relationships: (1) the peak strength envelope; (2) the residual strength envelope; and (3) the residual factor versus displacement ratio relationship, which is a nondimensional expression of the rate at which displacement-softening occurs. The displacement-softening model is accurate for shearing when the normal stress stays constant. When normal stress increases during shearing, the displacement-softening formulation overpredicts damage to geosynthetic interfaces. The work-softening model was developed to compute interface softening during conditions of increasing normal stress. This formulation is based on the assumption that the postpeak reduction in shear strength can be attributed to plastic shear work rather than plastic shear displacement. By calculating an equivalent plastic shear displacement for a given amount of plastic shear work, the work-softening model can be formulated using the same basic relationships as the displacement-softening model. The work-softening model significantly outperformed the displacement-softening model when simulating laboratory tests under conditions of increasing normal stress.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bentler, D. J., Morrison, C. S., Esterhuizen, J. J. B., and Duncan, J. M. ( 1999). Sage User's Guide, Virginia Polytechnic Institute and State University, Blacksburg, Va.
2.
Byrne, J. R. ( 1994). “Design issues with displacement-softening interfaces in landfill liners.” Proc., Waste Tech '94, Charleston, S.C.
3.
Desai, C. S., and Ma, Y. ( 1992). “Modeling of joints and interfaces using the disturbed-state concept.” Int. J. for Numer. and Analytical Methods in Geomech., 16, 623–653.
4.
Drucker, D. C. ( 1954). “Coulomb friction, plasticity and limit loads.” J. Appl. Mech., 21, 71–74.
5.
Duncan, J. M. ( 1994). “The role of advanced constitutive relations in practical applications.” Proc., 13th Int. Conf. on Soil Mech., New Delhi, 5, 31–48.
6.
Duncan, J. M. (1996). “State of the art: limit equilibrium and finite-element analysis of slopes.”J. Geotech. Engrg., ASCE, 122(7), 577–596.
7.
Esterhuizen, J. J. B. ( 1997). “Progressive failure of slopes in lined waste impoundments.” PhD thesis, Virginia Tech, Blacksburg, Va.
8.
Ghaboussi, J., Wilson, E. L., and Isenberg, J. (1973). “Finite element for rock joints and interfaces.”J. Soil Mech. and Found. Div., ASCE, 99(10), 849–862.
9.
Giroud, J. P., Darrasse, J., and Bachus, R. C. ( 1993). “Hyperbolic expression for soil-geosynthetic or geosynthetic-geosynthetic interface shear strength.” Geotextiles and Geomembranes, 12(3), 275–286.
10.
Gomez, J. E., and Filz, G. M. ( 1999). “Influence of consolidation on the strength of the interface between a clay liner and a smooth geomembrane.” Proc., Geosynthetics 99, Industrial Fabrics Association, Roseville, Minn., 681–696.
11.
Goodman, R. E., Taylor, R. L., and Brekke, T. L. (1968). “A model for the mechanics of jointed rock.”J. Soil Mech. and Found. Div., ASCE, 14, 637–659.
12.
Heuze, F. E., and Barbour, T. G. (1982). “New models for rock joints and interfaces.”J. Geotech. Engrg., ASCE, 108(5), 757–776.
13.
Jenevein, D. R., Deschamps, R. J., Leonards, G. A., and Byrne, R. J. ( 1996). “The stability of landfills with strain softening liner interfaces.” Proc., 2nd Int. Congr. on Envir. Geotechnics, Osaka, Japan, 1, 229–232.
14.
Plesha, M. E. ( 1987). “Constitutive models for rock discontinuities with dilatancy and surface degradation.” Int. J. for Numer. and Analytical Methods in Geomech., 20, 35–56.
15.
Shallenberger, W. C., and Filz, G. M. ( 1996). “Interface strength determination using a large displacement shear box.” Proc., 2nd Int. Congr. on Envir. Geotechnics, Osaka, Japan, 1, 147–152.
16.
Skempton, A. W. ( 1964). “Long term stability of clay slopes.” Géotechnique, London, 14(2), 77–101.
17.
Stankowski, T., Runesson, K., and Sture, S. (1993). “Fracture and slip of interfaces in cementitious composites. I: Characteristics.”J. Engrg. Mech., ASCE, 119(2), 292–314.
18.
Turnbull, W. J., and Hvorslev, M. J. (1967). “Special problems in slope stability.”J. Soil Mech. and Found. Div., ASCE, 93, 499–528.
19.
Wood, D. M. ( 1990). Soil behavior and critical state soil mechanics, Cambridge University Press, New York.
20.
Yob, S. J., Spikula, D. R., Benson, C. P., and Shafer, A. L. ( 1995). “Geoenvironmental challenges at the Old Dominion sanitary landfill and resource management facility.” Proc., Geoenvir. 2000, ASCE, New York, 641–654.
Information & Authors
Information
Published In
History
Received: Feb 24, 2000
Published online: Oct 1, 2001
Published in print: Oct 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.