Plasma Magmavication of Soils by Nontransferred Arc
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 126, Issue 5
Abstract
Electrical plasma arcs create very high temperatures (T > 4,000°C) that can be specifically directed for the in-place melting of soils. This overview presents a summary of the basic features and capabilities of plasma torches having a nontransferred type of arc for the in situ vitrification of soils. Laboratory chamber experiments using 100 kW and 240 kW plasma systems and full-scale field trials using a 1 MW portable system have successfully melted a variety of soil types, including sands, silts, and clays. Within five minutes' exposure to the arc, a core region of magma forms within the soil matrix that expands radially outward and upward as the torch is pulled out vertically. Several days afterwards, the molten zone cools to form an artificial igneous rock similar to obsidian, basalt, or granite. The size of the vitrified mass is proportional to the electrical power demand. The plasma torch has a configuration similar to a flamethrower and will therefore be amenable to placement down boreholes for purposes of in situ ground modification and subsurface remediation.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Beaver, J. R. ( 1996). “Plasma vitrification of geomaterials,” MS thesis, School of Civ. & Envir. Engrg., Georgia Institute of Technology, Atlanta.
2.
Beaver, J. R., and Mayne, P. W. (1995). “Baseline geoenvironmental experiments for in-situ soil transformation by plasma torch.” Proc., Int. Symp. on Envir. Technol. by Plasma Syst. & Applications, Vol. 2, Georgia Tech Research Corporation, Atlanta, 617–630.
3.
Beles, A. A., and Stanculescu, I. I. (1958). “Thermal treatment as a means of improving the stability of earth masses.” Geotechnique, London, 8(4), 158–165.
4.
Blundy, R. F., Zionkowski, P., Schumacher, R. F., and Herman, D. T. (1996). “Demonstration of plasma in-situ vitrification at the K-reactor seepage basin.” Rep. WSRC-TR-96-0390, Westinghouse Savannah River Center, Aiken, S.C., 1–8.
5.
Buelt, J. L., Timmerman, C. L., Oma, K. H., FitzPatrick, V. F., and Carter, J. G. (1987). “In-situ vitrification of transuranic wastes: an updated systems evaluation and applications assessment.” Rep. No. DE-AC06-76RLO, Contract PNL-4800, Pacific Northwest Laboratories, Hanford, Wash.
6.
Byers, M. G., Fitzpatrick, V. F., and Holtz, R. D. (1991). “Site remediation by in-situ vitrification.” Transp. Res. Rec. 1312, Transportation Research Board, Washington, D.C., 162–166.
7.
Camacho, S. L. (1988). “Industrial-worthy plasma torches: state-of-the-art.” Pure and Appl. Chemistry, 60(5), 619–632.
8.
Camacho, S. L. (1995). “The plasma arc torch: its electrical and thermal characteristics.” Proc., Int. Symp. on Envir. Technol. by Plasma Syst. & Applications, Vol. 1, Georgia Tech Research Corporation, Atlanta, 45–66.
9.
Camacho, S. L., et al. (1992). Proc. Plasma Technol. for a Better Envir., International Union for Electroheat (UIE), Paris.
10.
Campanella, R. G. ( 1994). “Field methods for dynamic geotechnical testing: an overview of capabilities and needs.” Dynamic geotechnical testing II (STP 1213), ASTM, West Conshohocken, Pa., 3–23.
11.
Celes, J. ( 1999). “Transformation of processed kaolin by plasma magmavication,” MS thesis, School of Civ. & Envir. Engrg., Georgia Institute of Technology, Atlanta.
12.
Circeo, L. J., and Mayne, P. W. (1993). “In-situ thermal stabilization of soils using plasma arc technology.” Rep. E-20-G30 Prepared for National Science Foundation (Grant MSS-9113134), Georgia Tech Research Corporation, Atlanta.
13.
Circeo, L. J., Mayne, P. W., Newsom, R. A., and Mayer, K. A. (1996). “Demonstration of in-situ plasma vitrification technology for Savannah River Site contaminated soils.” Final Rep. ERDA Contrast No. 95069, Georgia Tech Research Corp., Atlanta.
14.
Daniel, D. E., and Olson, R. E. (1974). “Stress-strain properties of compacted clays.”J. Geotech. Engrg., Div., ASCE, 100(10), 1123–1136.
15.
Detering, B. A., and Batdorf, J. A. (1992). “Plasma treatment of INEL soil contaminated with heavy metals.” Rep. EGG-WTD-9925, Idaho National Engineering Laboratory, Idaho Falls, Idoho.
16.
Dragun, J. (1991). “Geochemistry and soil chemistry reactions occurring during in situ vitrification.” J. Hazardous Mat., 26, 343–364.
17.
Fujii, T. (1971). “The practical applications of thermal and freezing methods to soil stabilization.” Proc., 1st Australian-New Zealand Conf. in Geomech., 337–343.
18.
Hausmann, M. R. (1990). Engineering principles of ground modification. McGraw-Hill, New York.
19.
Hill, R. A. (1934). “Clay stratum dried out to prevent landslips.” Civ. Engrg., ASCE, 4(8), 403–407.
20.
Hoar, R. J., and Stokoe, K. H. ( 1978). “Generation and measurement of shear waves in-situ.” Dynamic geotechnical testing (STP 654), ASTM, West Conshohocken, Pa., 3–30.
21.
Inaba, T. (1995). “The status of R & D of thermal plasma applications in Japan.” Proc., Int. Symp. on Envir. Technol. by Plasma Syst. & Applications, Vol. 1, Georgia Tech Research Corporation, Atlanta, 13–34.
22.
Irvine, L. R. (1930). “Road making by heat treatment of soils.” Trans., Inst. of Engrg., Australia, Barton, Australia, 11(1), 405–416.
23.
Jacobs, G. K., Dunbar, N. W., Nancy, M. T., and Williams, R. T. (1992). “Petrologic and geophysical studies of an artificial magma.” Trans. Am. Geophysical Union, 73(38), 411–412.
24.
Kleni, C., and Hurlbut Jr., S (1985). Manual of mineralogy, Wiley, New York.
25.
Litvinov, I. M. (1960). “Stabilization of settling weak clayey soils by thermal treatment.” Hwy. Res. Board, Special Rep. No. 60, National Research Council, Washington, D.C.
26.
Mayer, K. A. ( 1997). “Laboratory chamber experiments simulating in-situ plasma vitrification for geoenvironmental concerns,” MS thesis, School of Civ. & Envir. Engineering, Georgia Institute of Technology, Atlanta.
27.
Mayne, P. W. (1994). “Plasma vitrification of contaminated ground and wastes.” Geotech. News, 12(4), Vancouver, Canada, 41–43.
28.
Mayne, P. W., and Beaver, J. R. (1996). “High-temperature plasma vitrification of geomaterials.”Electronic J. Geotech. Engrg., 7(1).
29.
Mayne, P. W., Burns, S. E., and Rix, G. J. (1997). “Summary report: site characterization program, demonstration of nontransferred arc in-situ plasma magmavication at K-basin.” GTRC Rep. Proj. No. E20-M51 Prepared for Environmental Restoration, Westinghouse Savannah River Company, Aiken, S.C.
30.
Mitchell, J. K. (1981). “Soil improvement: state-of-the-art.” Proc., 10th Int. Conf. on Soil Mech. and Found. Engrg., Boulimia Publ., Stockholm, 509–565.
31.
Schneider, J., Waggener, K., and Mayne, P. W. (1996). “Plasma vitrification of geomaterials from Savannah River site.” Rep. Prepared for Westinghouse/Bechtel, Georgia Tech Research Corp., Atlanta.
32.
Sears, J. W., Eschenbach, R. C., and Hill, R. A. (1990). “The plasma centrifugal furnace: a method for stabilization and decomposition of toxic and radioactive wastes.” Waste Mgmt., 10, 165–175.
33.
Spalding, B. P., and Jacobs, G. K. (1989). “Evaluation of an in-situ vitrification field demonstration of a simulated radioactive liquid waste disposal trench.” Publ. No. 3332, ORNL/TM-10992, Oak Ridge National Laboratory, Oak Ridge, Tenn.
34.
Spalding, B. P., Jacobs, G. K., Dunbar, N. W., Naney, M. T., Tixier, J. S., and Powell, T. D. (1992). “Tracer-level radioactive pilot-scale test of in situ vitrification for the stabilization of contaminated soil sites at ORNI.” Publ. No. 3962, ORNL/TM-12201, Oak Ridge National Laboratory, Tenn.
35.
Staley, L. S. (1992). “Site demonstration of the retech plasma centrifugal furnace: the use of plasma to vitrify contaminated soil.” J. Air Waste Mgmt. Assoc., 42(10), 1372–1376.
36.
Stokoe, K. H., Rix, G. J., and Nazarian, S. (1989). “In-situ seismic testing with surface waves.” Proc., 12th Int. Conf. on Soil Mech. and Found. Engrg., Balkema, Rotterdam, The Netherlands, 1, 331–334.
37.
Tatsuoka, F., and Shibuya, S. (1992). “Deformation characteristics of soils and rocks from field and laboratory tests.” Rep. of the Inst. of Industrial Sci., 37(1), University of Tokyo, Tokyo.
38.
Zaghloul, H., Cortez, R., and Smith, E. (1995). “Plasma waste remediation activities in the United States.” Proc., Int. Symp. on Envir. Technol. by Plasma Syst. & Applications, Georgia Tech Research Corporation, Atlanta, 1, 1–13.
Information & Authors
Information
Published In
History
Received: Jun 22, 1998
Published online: May 1, 2000
Published in print: May 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.