Factors of Safety and Reliability in Geotechnical Engineering
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 126, Issue 4
Abstract
Simple reliability analyses, involving neither complex theory nor unfamiliar terms, can be used in routine geotechnical engineering practice. These simple reliability analyses require little effort beyond that involved in conventional geotechnical analyses. They provide a means of evaluating the combined effects of uncertainties in the parameters involved in the calculations, and they offer a useful supplement to conventional analyses. The additional parameters needed for the reliability analyses—standard deviations of the parameters—can be evaluated using the same amount of data and types of correlations that are widely used in geotechnical engineering practice. Example applications to stability and settlement problems illustrate the simplicity and practical usefulness of the method.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Benson, C. H., Daniel, D. E., and Boutwell, G. P. (1999). “Field performance of compacted clay liners.”J. Geotech. and Geoenvir. Engrg., ASCE, 125(5), 390–403.
2.
Burland, J. B., and Burbridge, M. C. (1985). “Settlement of foundations on sand and gravel.” Proc., Inst. of Civ. Engrs., Part 1, 78, 1325–1381.
3.
Christian, J. T., Ladd, C. C., and Baecher, G. B. (1994). “Reliability applied to slope stability analysis.” J. Geotech. Engr., 20, Dec., 2180–2207.
4.
Dai, S.-H., and Wang, M.-O. (1992). Reliability analysis in engineering applications. Van Nostrand Reinhold, New York.
5.
Duncan, J. M., and Buchignani, A. L. (1973). “Failure of underwater slope in San Francisco Bay.”J. Soil Mech. and Found. Div., ASCE, 99(9), 687–703.
6.
Folayan, J. I., Hoeg, K., and Benjamin, J. R. (1970). “Decision theory applied to settlement predictions.”J. Soil Mech. and Found. Div., ASCE, 96(4), 1127–1141.
7.
Harr, M. E. ( 1984). “Reliability-based design in civil engineering.” 1984 Henry M. Shaw Lecture, Dept. of Civil Engineering, North Carolina State University, Raleigh, N.C.
8.
Harr, M. E. (1987). Reliability-based design in civil engineering. McGraw-Hill, New York.
9.
Kulhawy, F. H. ( 1992). “On the evaluation of soil properties.” ASCE Geotech. Spec. Publ. No. 31, 95–115.
10.
Lacasse, S., and Nadim, F. ( 1997). “Uncertainties in characterizing soil properties.” Publ. No. 201, Norwegian Geotechnical Institute, Oslo, Norway, 49–75.
11.
Tang, W. H., Stark, T. D., and Angulo, M. (1999). “Reliability in back analysis of slope failures.”J. Soil Mech. and Found., Tokyo, October.
12.
Terzaghi, K., Peck, R. B., and Mesri, G. (1996). Soil mechanics in engineering practice,” 3rd Ed., Wiley, New York.
13.
U.S. Army Corps of Engineers. (1997). “Engineering and design introduction to probability and reliability methods for use in geotechnical engineering.” Engr. Tech. Letter No. 1110-2-547, Department of the Army, Washington, D.C., 〈www.usace.army.mil/usace-docs〉 (30 Sept. 1997).
14.
U.S. Army Corps of Engineers. (1998). “Risk-based analysis in geotechnical engineering for support of planning studies.” Engrg. Circular No. 1110-2-554, Department of the Army, Washington, D.C., 〈www. usace.army.mil/usace-docs〉 (27 Feb. 1998).
15.
Wolff, T. F. (1994). “Evaluating the reliability of existing levees.” Rep., Res. Proj.: Reliability of existing levees, prepared for U.S. Army Engineer Waterways Experiment Station Geotechnical Laboratory, Vicksburg, Miss.
Information & Authors
Information
Published In
History
Received: May 13, 1999
Published online: Apr 1, 2000
Published in print: Apr 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.