Turbulence-Driven Metal Release from Resuspended Pyrrhotite Tailings
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 126, Issue 12
Abstract
The use of shallow water covers (up to 2 m) to flood reactive sulfide mine tailings is a common method of reducing the environmental impact of mining. It relies on the low solubility and diffusivity of oxygen in water. In actual tailings ponds, however, wind-induced waves and turbulent mixing can lead to tailings resuspension and increased oxygen transfer. Laboratory experiments and numerical modeling were performed to examine the impact of resuspension on metal release from sulfide mine tailings, and to elucidate the nature of the flow field. The results indicated that resuspended tailings oxidized and released acidity and metals considerably more than tailings at rest. The oxidation and metal release rates increased with an increase in the degree of turbulence-induced mixing in the water cover. Computed wall shear stresses on the surface of the tailings ranged from 0.14 to 0.42 N/m2, which were close to, but slightly above, the critical shear stresses of the tailings (0.12–0.17 N/m2). The flow energy was found to be positively correlated to the cumulative release of metals (zinc, nickel, copper, and ferric iron) and sulfate.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
AEA Technologies. ( 1997). CFX-TASCflow computational fluid dynamics software, Waterloo, Ont., Canada.
2.
Brown, D. S., and Allison, J. D. ( 1991). MINTEQA2 V.3.11—Metal speciation equilibrium model for subsurface and ground water, National Technical Information Service (NTIS), Springfield, Va.
3.
Davé, N. K., and Vivyurka, A. J. ( 1994). “Water cover on acid generating uranium tailings—laboratory and field studies.” Int. Land Reclamation and Mine Drainage Conf. and 3rd Int. Conf. on Abatement of Acidic Drainage, U.S. Department of the Interior, Bureau of Mines Special Publication SP 06A-94, Vol. 1, Mine Drainage, 297–306.
4.
Garrels, R. M., and Christ, C. L. ( 1965). Solutions, minerals, and equilibria, Freeman, San Francisco.
5.
Hurlbut, C. S., Jr. and Klein, C. ( 1977). Manual of mineralogy, 19th Ed., Wiley, New York.
6.
Janzen, M. P., Nicholson, R. V., and Scarer, J. M. ( 1997). “The role of enhanced particle surface area, crystal structure and trace metal content on pyrrhotite oxidation rates in tailings.” 4th Int. Conf. on Acid Rock Drain., Canada Centre for Mineral and Energy Technology (CANMET), Ottawa, Canada, 1, 401–415.
7.
Launder, B. E., and Spalding, D. B. ( 1974). “The numerical computation of turbulent flows.” Comp. Methods in Appl. Mech. and Engrg., 3, 269–289.
8.
Levinson, L. M., and Treves, D. ( 1968). “Mössbauer study of magnetic structure of Fe7S8.” J. Phys. and Chem. of Solids, 29, 2227–2231.
9.
Nicholson, R. V. ( 1994). “Iron-sulfide oxidation mechanisms: Laboratory studies.” Short course handbook on environmental geochemistry of sulfide mine-wastes, Vol. 22, Mineralogical Association of Canada, Nepean, Ont., Canada, 163–183.
10.
Pratt, A. R., Muir, I. J., and Nesbitt, H. W. ( 1994). “X-ray photoelectron and auger electron spectroscopic studies of pyrrhotite and mechanisms of air oxidation.” Geochim. Cosmochim. Acta., 58, 827–842.
11.
Stumm, W., and Lee, G. F. ( 1961). “Oxygenation of ferrous iron.” Industrial and Engrg. Chem., 53, 143–146.
12.
Verma, A. ( 1998). “An investigation of resuspension and gas transfer in flooded mine tailings.” PhD dissertation, Dept. of Civ. and Envir. Engrg., The University of Western Ontario, London, Ont., Canada.
13.
Yanful, E. K., and Verma, A. ( 1998). “Predicting resuspension in flooded mine tailings.” Proc., 51st Can. Geotech. Conf., Canadian Geotechnical Society, Alliston, Ont., Canada, 1, 113–121.
14.
Yanful, E. K., and Verma, A. ( 2000). “Oxidation of flooded mine tailings due to resuspension.” Can. Geotech. J., Ottawa, 36(5), 846–860.
Information & Authors
Information
Published In
History
Received: Mar 19, 1999
Published online: Dec 1, 2000
Published in print: Dec 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.