Significance of Soil Dilatancy in Slope Stability Analysis
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 126, Issue 1
Abstract
A finite-element approach is used to analyze the slope stability problem and to examine the effect of soil dilatancy on the stability of slopes. It is found that soil dilatancy has a significant effect on the stability of slopes, and that higher values of dilation angle lead to larger stability numbers. Therefore, the stability numbers obtained from limit analyses (lower/upper bound solutions) are not conservative for granular soils that exhibit a dilation angle smaller than a soil's friction angle.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bolton, M. D. (1986). “The strength and dilatancy of sands.” Géotechnique, London, 36(1), 65–78.
2.
Chen, W. F. (1975). Limit analysis and soil plasticity. Elsevier Science, Amsterdam.
3.
Davis, E. H., and Booker, J. R. (1973). “Some adaptations of classical plasticity theory for soil stability problems.” Proc., Symp. Plast. Soil Mech., A. Palmer, ed., Cambridge University Press, Cambridge, 24–41.
4.
Drescher, A., and Detouney, E. (1993). “Limit load in translational failure mechanisms for associative and non-associative materials.” Géotechnique, London, 43, 443–456.
5.
Drucker, D. C., and Prager, W. (1952). “Soil mechanics and plastic analysis or limit design.” Quarterly of Appl. Mathematics, 10, 157–165.
6.
Griffith, D. V. (1982). “Computation of bearing capacity on layered soils.” Proc., 4th Int. Conf. Num. Meth. Geomech., Z. Eisenstein, ed., Balkema, Rotterdam, The Netherlands.
7.
Michalowski, R. L., and Shi, L. (1995). “Bearing capacity of footing over two-layer foundation soils.”J. Geotech. Engrg., ASCE, 121(5), 421–428.
8.
Mizuno, E., and Chen, W. F. (1983). “Cap models for clay strata to footing loads.” Comp. and Struct., 17, 511–528.
9.
Ortiz, M., Leroy, Y., and Needleman, A. (1987). “A finite element method for localized failure analysis.” Comput. Meth. Appl. Mech. Engrg., 61, 189–214.
10.
Powrie, W. (1997). Soil mechanics, concepts and applications. E&FN Spon, London.
11.
Rowe, P. W. (1962). “The stress-dilatancy relation for static equilibrium of an assembly of particles in contact.” Proc., Royal Soc., London, Series A, 269, 500–527.
12.
Rowe, P. W. (1963). “Stress-dilatancy, earth pressure and slopes.”J. Soil Mech. and Found. Div., ASCE, 89(5), 37–61.
13.
Rowe, P. W., and Peaker, K. (1965). “Passive earth pressure measurements.” Géotechnique, London, 15(1), 57–78.
14.
Sloan, S. W., and Booker, J. R. (1986). “Removal of singularities in Tresca and Mohr-Coulomb yield functions.” Comm. Appl. Numer. Meth., 2, 173–179.
15.
Vermeer, P. A., and de Borst (1984). “Non-associated plasticity for soils, concrete, and rock.” Heron, 29, 1–64.
16.
Yu, H. S., Selgado, R., Sloan, S. W., and Kim, J. (1998). “Limit analysis versus limit equilibrium for slope stability.”J. Geotech. and Geoenvir. Engrg., ASCE, 124(1), 1–11.
17.
Zienkiewicz, O. C., Humpherson, C., and Lewis, R. W. (1975). “Associated and non-associated viscoplasticity and plasticity in soil mechanics.” Géotechnique, London, 25, 671–689.
18.
Zienkiewicz, O. C., and Pande, G. N. ( 1977). “Some useful forms of isotropic yield surfaces for soil and rock mechanics.” Finite elements in geomechanics, Chapter 5, G. Gudehus, ed., Wiley, New York, 179–190.
Information & Authors
Information
Published In
History
Received: Jan 11, 1999
Published online: Jan 1, 2000
Published in print: Jan 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.